A STUDY ON THE PERFORMANCE OF THE CATALYTIC POROUS-WALL THREE-PHASE REACTOR

A theoretical investigation of a catalytic porous-wall reactor in which gaseous and liquid reactants approach each other from opposite sides of the catalyst is undertaken. Equations for the annular liquid-channel are coupled with those for the catalytic wall and solved numerically and analytically using a simplified model. For the model reaction under study, the main design and operation parameters which affect reactor performance are the Thiele modulus, Peclet number, width of the liquid channel and the inlet concentration of the reactant in the liquid phase.

The effect of reactor configuration is peculiar to the cylindrical geometry because the thickness and relative location of the catalytic wall as well as the selection of the liquid and gas channels can influence the reactor performance. Thin-walled catalyst tubes have larger effectiveness factors and as the tube radius approaches that of the reactor, conversion in the reactor increases especially when the liquid is saturated with the gaseous reactant. Concentration of the liquid reactant in the feed has a significant effect if the reactant is depleted at some point inside the catalyst wall. Since the reaction zone width can be adjusted by changing the feed composition, this might have important implications with respect to selectivity.     

Thermal Decomposition of Europium Hydroxide

The thermal decomposition of europium hydroxide in an air atmosphere was investigated by means of weight-loss measurements, infrared spectroscopy, X-ray diffraction analysis, and electron microscopy. These studies showed that EU(OH)° decomposed at temperatures between 225° and 300°C into EuOOH, which was stable up to about 425°C. Between 435° and 465°C this compound decomposed into cubic Eu₂O₃, which was stable until its inversion to the high-temperature monoclinic form. X-ray diffraction data were collected for Eu(OH)₃ and EuOOH and showed that the trihydroxide has a hexagonal crystal structure and the oxyhydroxide is possibly orthorhombic. The Eu(OH)₂, EuOOH, and cubic EunOa powders contained particles up to several microns in size consisting of agglomerates of crystallites in the size range 200 to 400 A. The single monoclinic Eu₂O₃ sample studied contained crystallites whose average size was greater than 2000 A.     

High-Temperature Fatigue Behavior of Polycrystalline Alumina

The strength and fatigue behavior of a 99.5% polycrystalline alumina were measured as a function of temperature. Both the strength and fatigue behavior remained essentially constant up to 500°C; from 800° to 1100°C the strength and fatigue resistance decreased markedly and at >1100°C macroscopic creep was observed. It is believed that the decrease in strength and fatigue resistance is caused by a grain-boundary glassy phase enhancing subcritical crack growth. Proof-testing at room temperature was effective in improving the strength distributions at both room temperature and 1000°C; however, at 1000°C it was not effective, due to crack growth during the proof test. The good agreement between proof-test results and fracture-mechanics theory indicates that the same flaws control the strength at room temperature and at high temperatures.     

Radical entry mechanisms in redox-initiated emulsion polymerizations

The mechanisms and kinetics of radical entry in emulsion polymerizations utilizing redox initiation are investigated using polymerization rate data obtained by reaction calorimetry and electrospray mass spectroscopy analysis of initiator-derived aqueous-phase products. These data have been used to evaluate an initiation scheme for redox-initiated emulsion polymerizations of common monomers such as styrene and methyl methacrylate based around the oxidant, tert-butyl hydroperoxide. Redox initiators are broadly classed by the solubility of their radical products: Hydrophilic radicals enter by propagating to a critical degree of polymerization to become surface-active whilst more hydrophobic radicals may enter particles directly. When direct entry is applicable (the hydrophobic case), initiation efficiency will always be very high.     

Mechanical distraction for treatment of severe knee flexion contractures

Ten patients (14 knees) with severe knee flexion contractures were treated by gradual mechanical distraction using either the Ilizarov or Orthofix external fixator. Range of motion improved from an average flexion contracture of 60 degrees before surgery to 16 degrees at the follow-up evaluation. Range of motion results were graded good or excellent in five knees, fair in two knees, and poor in three knees. Average total arc of motion remained essentially unchanged when comparing the preoperative (59 degrees) with the follow-up results (63 degrees). However, the functional position of this arc improved significantly. Problems encountered included a "rebound" phenomena after frame removal, with loss of the temporarily increased total arc of motion. The role of hamstring tenotomy and radical posterior knee release remains unclear.     

Characterization and use of an optical fiber interferometer for measurement of the electric wind

An optical fiber interferometer of the Mach-Zehnder type has proved to be a convenient and accurate method for measuring the electric wind in the active region of a corona discharge. The technique relies on the cooling effect of the wind on a small heated region of one arm of the interferometer, which has been remotely heated with an infrared CO(2) laser beam. Wind speeds of up to 5.5 m s(-1) have been measured near the generation region, and by the use of a mesh electrode, the wind has been detected on the axis up to 0.5 m away from the gap. A number of characterization experiments that show the interferometer to be a useful diagnostic tool in the quantitative analysis of the CO(2) laser beam have also been carried out, and good agreement between experimental results and theoretical calculations based on a simple heat-power balance equation for the fiber exists.     

Interpretation time of serial chest CT examinations with stacked-metaphor workstation versus film alternator

PURPOSE: Interpretation time of serial staging chest CT cases, which each contained current and previous examinations, with a simple prototype workstation called filmstack was experimentally compared with interpretation time with a film alternator. MATERIALS AND METHODS: The filmstack displayed a "stack" of sections for each examination; user controls allowed rapid selection of preset attenuation windows and both synchronized and unsynchronized scrolling. Eight radiologists were timed as they used the filmstack and the film alternator to interpret four ergonomically complex serial CT cases. RESULTS: All reports dictated on the basis of findings with filmstack and film were of acceptable clinical accuracy. The time to examine a case with filmstack was significantly faster than the time with film, including the time to load and unload the alternator (99% confidence [P = .01]). There was no statistically significant difference in interpretation time between filmstack and prehung film. CONCLUSION: Use of a low-cost stacked CT workstation with a single 1,024 x 1,024 monitor is an effective means of interpreting cases that require comparison of multiple CT examinations.     

Insights into the assessment of myocardial perfusion offered by different cardiac imaging modalities

Myocardial perfusion may be very broadly defined as the tightly regulated nutrient delivery to cardiac tissue. The different components of perfusion are myocardial blood flow, oxygen delivery, myocardial oxygen consumption, and myocardial blood volume. Historically, focus has been placed mostly on the assessment of blood flow. In many instances, knowledge of flow without information about these other aspects is inadequate. This review discusses the various cardiac imaging techniques used for the assessment of myocardial perfusion that represent diverse physiologic measures of "perfusion." Their strengths and limitations are discussed as is their relevance to specific clinicopathologic conditions. Significant work still needs to be performed before all the aspects of myocardial perfusion can be precisely measured in human beings.     

Visualization and quantification of myocardial mass at risk using three-dimensional contrast echocardiography

To investigate possible biochemical mechanisms underlying the "toxic gain of function" associated with polyglutamine expansions, the ability of guinea pig liver tissue transglutaminase to catalyze covalent attachments of various polyamines to polyglutamine peptides was examined. Of the polyamines tested, spermine is the most active substrate, followed by spermidine and putrescine. Formation of covalent cross links between polyglutamine peptides and polyamines yields high-M(r) aggregates--a process that is favored with longer polyglutamines. In the presence of tissue transglutaminase, purified glyceraldehyde-3-phosphate dehydrogenase (a key glycolytic enzyme that binds tightly to the polyglutamine domains of both huntingtin and dentatorubral-pallidoluysian atrophy proteins) is covalently attached to polyglutamine peptides in vitro, resulting in the formation of high-M(r) aggregates. In addition, endogenous glyceraldehyde-3-phosphate dehydrogenase of a Balb-c 3T3 fibroblast cell line overexpressing human tissue transglutaminase forms cross-links with a Q60 polypeptide added to the cell homogenate. Possibly, expansion of polyglutamine domains (thus far known to occur in the gene products associated with at least seven neurodegenerative diseases) leads to increased/aberrant tissue transglutaminase-catalyzed cross-linking reactions with both polyamines and susceptible proteins, such as glyceraldehyde-3-phosphate dehydrogenase. Formation of cross-linked heteropolymers may lead to deposition of high-M(r) protein aggregates, thereby contributing to cell death.