Bioavailability of Calcium from Sesame Seeds, Almond Powder, Whole Wheat Bread, Spinach and Nonfat Dry Milk in Rats

Calcium bioavailability (BV) from sesame seeds, almond powder, whole wheat bread, spinach, and nonfat dry milk (NFDM) was compared to calcium BV from a calcium carbonate (CaCO₃)-supplemented control diet using a rat model. When comparing different calcium sources, the relative BV of the products was CaCO₃ (100%), NFDM (100%) whole wheat bread (95%), almond powder (66%), sesame seeds (65%), NFDM and spinach mixture (52%), and spinach (47%). Separate almond, NFDM, and CaCO₃ diets were supplemented with 0.4% ascorbic acid; vitamin C addition had no significant effect on calcium BV.     

Influence of Poultry Species, Muscle Groups, and NaCl Level on Strength, Deformability, and Water Retention in Heat-Set Muscle Gels

The effects of poultry species (chicken and turkey), muscle groups (breast, thigh, and drum) and NaCl concentration (1% and 2%) on a low fat gel system were compared using measurements of shear stress (strength), shear strain (deformability), and two water retention measurements. Results showed doubling NaCl tended to double stress for all species and muscle groups and increased strain by 30–50%. Cross species differences showed higher stress in turkey gels than in chicken gels with 2% NaCl. For both species, stress, strain and water retention were lowest in breast gels with both NaCl concentrations, and strain was greater in thigh gels than in drum gels with 2% NaCl.     

Steam Surface Pasteurization of Beef Frankfurters

Meat and poultry products are sources of foodborne bacterial contamination. We used flash steam heating followed by evaporative cooling to quickly reduce bacterial contamination on the surface of beef frankfurters without degrading appearance. The rate of heat transfer was studied by measuring surface temperature in a pressure chamber during steam heating. Quality changes were determined by measuring color and weight as functions of steam temperature and treatment time. Efficacy of the process was verified by microbiological experiments using L. innocua. Treatment times of 30–40 set at 115–136°C gave a 4 log reduction in bacterial counts on the surface without severely affecting color or weight. After long-term storage at 6°C and at 19°C, levels of bacteria on inoculated frankfurters remained reduced and there was no difference between treated and untreated products in color or weight.     

Differential Thermal Analysis Investigation of the High-Low Cristobalite Inversion Under Hydrostatic Pressure to 7 Kbar

The high-low inversion in polycrystalline cristobalite, synthesized from quartz at 1500°C, was investigated by differential thermal analysis to 7 kbar in hydrostatic apparatus. A region of anomalous curvature ( d²T/dp² >0) exists to ∼1 kbar; at higher pressure, the low→high and high→low transition temperatures vary linearly with pressure, with slopes of ∼51.₁ and 53. ₆ deg kbar⁻¹, respectively. Extrapolated 1-bar intercepts are ∼232° and ∼209°C, respectively. It is concluded that high cristobalite is less compressible than low cristobalite near the inversion. The hysteresis between the high→low and low→high transition temperatures decreases with increasing pressure.     

Deformation and Fracture Processes in Calcium Fluoride Single Crystals

The plastic properties of calcium fluoride single crystals tested in compression were investigated in the temperature range 25° to 1000°C. Above 400° C., the crystals showed appreciable ductility. The critical resolved shear stress, t, decreased with absolute temperature, T , according to the equation t = t₀e^+K/T. The rate of work-hardening decreased rapidly as the temperature increased but retained a relatively high value even as the melting point was approached. Air-annealed crystals were harder than as-cleaved crystals. Crystals with a (111) plane normal to the applied stress hardened less rapidly than crystals with a (110) plane normal to the applied stress. The dislocation density increased linearly with strain. (100), (110), and (111) fractures were observed.     

Phase Equilibria in the System CaF2-AlF3-Na3AlF6 and Part of the System CaF2-AlF3-Na3AlF6-Al2O3

The complete phase-equilibrium diagram of the system CaF₂-AlF₃-Na₃AlF₆ and the subsolidus portion of the system CaF₂-AlF₃-Na₃AlF₆-Al₂O₃ were established from microscopic, powder X-ray diffraction, quench, and DTA data obtained from samples encapsulated in sealed tubes and either reacted in the solid state or melted and recrystallized. The system Na₃AlF₆-CaF₂ contains a simple eutectic with no compound formation or solid solution. The system CaF₂-AlF₃-Na₃AlF₆ contains two ternary compounds, NaCaAlF₆ and NaCaAl₂F₉, which melt incongruently at 735° and 712°C, respectively; NaCaAlF₆ exists in three polymorphic forms with transitions at 610° and 722°C and NaCaAl₂F₉ is body-centered cubic with a₀= 10.765 Å. The three binary and two ternary compounds divide the system into eight compatibility triangles. Along the NaCaAlF₆-Na₃AlF₆ join, 7 mol% NaCaAlF₆ is soluble in α-cryolite at 525° and 42% in β-cryolite at 731°C. The quaternary system Na₃AlF₆-AlF₃-CaF₂-Al₂O₃ contains eight compatibility tetrahedra.     

Effect of Grinding on Flaw Geometry and Fracture of Glass

Fracture mechanics is combined with fracture surface analysis to analyze brittle failure of glass bars which were tested relative to the direction of grinding. Grinding essentially produces two sets of flaws from which failure occurs. In the most severe set, formed basically parallel to the grinding direction, the ratio of the average depth ( a ) to the half-width ( b ) is 0.5. In the less severe set, formed perpendicular to the grinding direction, the average a / b ratio is 1.6. In both sets the most severe flaws are generally associated with a particularly deep grinding groove or gouge. The strength reduction resulting from testing perpendicular to the grinding direction results from the larger flaw size and slightly higher stress-intensity factor resulting from the greater ellipticity of the flaws formed parallel to the grinding grooves and perpendicular to the tensile axis. Detailed analysis of these 2 sets of flaws causing failure of appropriately oriented specimens shows that (1) the fracture mirror radius, r , occurs at a constant stress-intensity level independent of flaw geometry; (2) unsymmetric fracture mirrors result from unsymmetric, irregular flaws leading to unsymmetric stress-intensity distributions; (3) is constant for semielliptical flaws; and (4) fracture energy calculated from an expression including mirror constants, the flaw-to-mirror size ratio, and the flaw geometry agrees with measured values over a wide range of a / b values.     

Phase Equilibria in the TiO2-Rich Region of the System BaO-TiO2

Phase relations in the system BaO-TiO₂ from 67 to 100 mol% TiO₂ were investigated at 1200° to 1450°C in O₂. Data were obtained by microstructural, X-ray, and thermal analyses. The existence of the stable compounds Ba₆Ti₁₇O₄₀, Ba₄Ti₁₃O₃₀, BaTi₄O₉, and Ba₂Ti₉O₂₀ was confirmed. The compound BaTi₂O₅ is unstable and either forms as a reaction intermediate below the solidus or crystallizes from the melt. The compounds Ba₆Ti₁₇O₄₀ and Ba₄Ti₁₃O₃₀ decompose in peritectic reactions, and BaTiO₃ and Ba₆Ti₁₇O₄₀ react to form a eutectic. Special conditions are required for the formation of Ba₂Ti₉O₂₀, which decomposes in a peritectoid reaction at 1420°C. The new phase diagram is presented.     

Raman Study of Isothermal Devitrificatn Kinetics of NaPO3 Glass

A laser Raman spectroscopic method was developed by which the increase in crystallinity of a devitrifying glass can be monitored continuously and isothermally at the devitrification temperature, without sample quenching, in a molecularly specific manner that yields high-quality kinetic data for the glass-crystal transformation. Applied to the study of vitreous (NaPO₃)_n( gl ), the method yielded continuous data which were fitted, by a nonlinear least-squares method, to an equation of the form α( t ) = 1- exp (- k_Nt^N ) with sufficient precision to permit optimization with respect to both N and k_N. The values of N and k_N vary with glass thermal history, i.e. with variations in time of heating at T_g for otherwise identical samples, although the material does not phase separate. The activation energy from any plot of In ( k_N )^{1/ N} vs (1/ T ) does not vary, but the offset of the curves indicates different preexponential terms in the Arrhenius expression. The results are analyzed in terms of current theories.     

Defect Structure of NiO-CoO Solid Solutions

Measurements at high temperature of integrated intensities of Bragg peaks were used to examine the defect structure in two NiO-CoO solid solutions. The results indicate that the concentrations of vacant cation sites at 1100° to 1500°C are 4 to 10% and the tetrahedral occupations 2 to 5%. The concentration of these defects increases with temperature and partial pressure of O₂. The mean-square displacements of oxygen ions and cations increase with temperature and CoO concentration.