Increasing the corrosion resistance of equipment due to the use of film-forming amines

Results of a study of tube specimens cut from hot-water boilers show that film-forming octadecyl amine (ODA) used in the process of preservation removes deposition from the surface of the metal. An ODA film is preserved on the surface after repeated washing of the latter with hot water. The concentration of chlorides at the surface of the metal after treatment with ODA is lower than before the treatment. __________ Translated from élektricheskie Stantsii, No. 11, November 2005, pp. 15–18.     

Effective Reduction of Horizontal Error in Laser Scanning Information by Strip‐Wise Least Squares Adjustments

Though the airborne laser scanning (ALS) technique is becoming more popular in many applications, horizontal accuracy of points scanned by the ALS is not yet satisfactory when compared with the accuracy achieved for vertical positions. One of the major reasons is the drift that occurs in the inertial measurement unit (IMU) during the scanning. This paper presents an algorithm that adjusts for the error that is introduced mainly by the drift of the IMU that renders systematic differences between strips on the same area. For this, we set up an observation equation for strip‐wise adjustments and completed it with tie point and control point coordinates derived from the scanned strips and information from aerial photos. To effectively capture the tie points, we developed a set of procedures that constructs a digital surface model (DSM) with breaklines and then performed feature‐based matching on strips resulting in a set of reliable tie points. Solving the observation equations by the least squares method produced a set of affine transformation equations with 6 parameters that we used to transform the strips for adjusting the horizontal error. Experimental results after evaluation of the accuracy showed a root mean squared error (RMSE) of the adjusted strip points of 0.27 m, which is significant considering the RMSE before adjustment was 0.77 m.     

原料酸卸车系统技术改进分析

分析了酸卸车系统存在的泵与管路的匹配、鹤管真空损失、酸腐蚀等技术问题，提出了鹤管的改进、卸车泵更新、真空系统水封、管路系统改进等保证真空能力的具体措施，实现了全自动、密闭卸车作业，最大限度地满足安全、快卸、底料少的要求。     

多孔粒状铵油炸药在边坡预裂爆破中的应用

通过工程实践，介绍了利用多孔粒状铵油炸药进行边坡预裂爆破的设计原理及施工工艺。该技术能确保预裂爆破质量。简化施工工序，大幅度降低爆破成本。技术经济指标优越。     

复合射孔枪枪身材料动态本构关系的试验研究

为确定复合射孔枪枪身材料32CrMo4钢在井下高温、高加载率工作环境下的动态性能,利用MTS试验机和分离式Hopkinson冲击压杆装置做了应变率为0.001、1000和3000/s,温度为294、373、473和573K的单轴动态压缩试验,得到32CrMo4钢各组温度及应变率下的流动应力-应变曲线。拟合得到该钢Johnson-Cook本构关系模型所需的5个参数,模型拟合曲线与试验曲线吻合。     

川东北三叠系飞仙关组鲕滩气藏有利储集层的形成与分布

川东北地区三叠系飞仙关组鲕滩气藏是近年四川盆地碳酸盐岩天然气勘探取得重大突破的领域，目前在中国石油探区内已发现罗家寨、渡口河、铁山坡等大中型气藏。对鲕滩气藏白云岩储集层进行岩心观察、显微薄片分析，并进行微量元素、流体包裹体、X衍射、阴极发光及电子探针等分析，结果表明，白云岩化和多期溶蚀是形成优质白云岩储集层的关键因素，混合云化与埋藏云化的叠加作用是形成孔隙性白云岩储集层的基本条件。飞仙关组鲕滩气藏储集层经历了4期溶蚀作用，即同生期溶蚀作用、浅埋期溶蚀作用、深埋期溶蚀作用和抬升期溶蚀作用，形成优质白云岩储集层的主要溶蚀作用是浅埋期和深埋期的溶蚀作用。优质白云岩储集层主要分布在台缘鲕粒滩相带，纵向与亮晶鲕粒灰岩呈韵律性互层，横向主要分布在鲕粒滩坝靠近漏湖-潮坪一侧。     

Shallow hydrogen-induced donor in monocrystalline silicon and quantum wires

Electrical and optical properties of bistable shallow donors in monocrystalline silicon, which are introduced by proton implantation followed by annealing at 450 °C, have been studied. The temperature dependences of equilibrium and non-equilibrium carrier concentration and relaxation kinetics were investigated. IR absorption lines of bistable shallow donor electronic excitations were detected. The obtained experimental data demonstrate that the bistable shallow donors can be identified as quantum wire defect nanoclusters.     

Experience with Siberian Centralized Dispatch Regulation regarding location determination of damages sustained by intersystem high-voltage transmission lines

A set of measures that can be implemented by the Relay-Protection and Automated-Equipment Service for Centralized Dispatch Regulation (CDR) in Siberia to determine the location of damage sustained by inter-system 550-and 220-kV transmission lines maintained by the United Power System (UPS) of Siberia, and the methodology and technology of damage-location determination (DLD) are described. The damage sustained by the 500-kV high-voltage lines (HL), and the accuracy of DLD relative to zero-sequence emergency parameters are analyzed statically. __________ Translated from élektricheskie Stantsii, No. 5, pp. 59–62, May, 2006.     

双程放大技术在光纤放大器中的应用

双程放大技术是一种高效率、低成本的实用化放大技术。本文介绍了双程放大技术的优点及在各种放大器中的应用。