Physical characteristics of extrudates from corn flour and dehulled carioca bean flour blend

Extruded products were prepared from a corn flour and dehulled carioca bean (Phaseolus vulgaris, L.) flour blend using a single-screw extruder. A central composite rotate design was used to evaluate the effects of extrusion process variables: screw speed (318.9–392.9 rpm), feed moisture (10.9–21.0 g/100 g) and bean flour level (4.8–55.2 g/100 g) on the specific mechanical energy (SME), sectional expansion index (SEI), longitudinal expansion index (LEI), volumetric expansion index (VEI) and density (D) of the extrudates. The instrumental texture was also analyzed. The independent variables had significant effects on the physical properties (SEI, VEI and density) of extrudates, with the exception of SME and LEI. SEI increased with increasing screw speed, but a higher moisture and bean flour content resulted in decreasing SEI and VEI. The increase of moisture and bean flour increased the density of extrudates. According to texture analysis, some treatments with 30 and 45 g/100 g bean flour did not show significant differences when compared to commercial brand snacks. However, when combined with higher moisture content (≥19 g/100 g) and lower screw speed (≤333 rpm), the results of the expanded product were not satisfactory.     

Microbiological,immunological, and histological changes in the gut of Salmonella Enteritidis-challenged rats fed goat cheese containing Lactobacillus rhamnosus EM1107

Cheeses are able to serve as suitable matrices for supplying probiotics to consumers, enabling appropriate conditions for bacteria to survive gastric transit and reach the gut, where they are assumed to promote beneficial processes. The present study aimed to evaluate the microbiological, immunological, and histological changes in the gut of Salmonella Enteritidis-challenged rats fed goat cheese supplemented with the probiotic strain Lactobacillus rhamnosus EM1107. Thirty male albino Wistar rats were randomly distributed into 5 experimental groups with 6 animals each: negative (NC) and positive (PtC) control groups, control goat cheese (CCh), goat cheese added with L. rhamnosus EM1107 (LrCh), and L. rhamnosus EM1107 only (EM1107). All animals, except NC group were challenged with Salmonella Enteritidis (10⁹ cfu in 1 mL of saline through oral gavage). Microbial composition was assessed with high-throughput 16S rRNA sequencing by means of Illumina MiSeq (Illumina, San Diego, CA). Nuclear factor kappa B (NF-κB) from the animal cecum tissue was determined by real-time PCR and interleukins (TNF-α, IL-1β, IL-10, and IFN-γ) by means of ELISA. Myeloperoxidase and malondialdehyde levels were determined biochemically. The administration of the L. rhamnosus EM1107 probiotic strain, either as a pure culture or added to a cheese matrix, was able to reduce Salmonella colonization in the intestinal lumen and lessen tissue damage compared with rats from PtC group. In addition, the use of cheese for the probiotic strain delivery (LrCh) was associated with a marked shift in the gut microbiota composition toward the increase of beneficial organisms such as Blautia and Lactobacillus and a reduction in NF-κB expression. These findings support our hypothesis that cheeses might be explored as functional matrices for the efficacious delivery of probiotic strains to consumers.     

Detection of methicillin-resistant coagulase-negative staphylococci and PVL/mecA genes in cefoxitin-susceptible Staphylococcus aureus (t044/ST80) from unpasteurized milk sold in stores in Djelfa,Algeria

This study was designed to determine antimicrobial resistance phenotypes and genotypes and virulence factors in Staphylococcus aureus and coagulase-negative staphylococci (CNS) in unpasteurized milk sold in Djelfa, Algeria. Eighty-two unpasteurized cow milk samples were randomly obtained from 82 retail stores in Djelfa and tested to detect staphylococci. Species were identified by biochemical tests and MALDI-TOF. Antimicrobial resistance phenotypes and genotypes were determined by disk diffusion test, PCR, and sequencing. The Staph. aureus isolates were subjected to spa typing, multilocus sequence typing, and detection of virulence genes and the scn gene by PCR and sequencing. Forty-five (54.9%) milk samples were contaminated by staphylococci and 45 isolates were recovered: 10 Staph. aureus (12.2% of total samples) and 35 CNS (42.7%). Resistance to penicillin (blaZ), tetracycline (tetL/tetK), and erythromycin (ermB/msrA/ermC) were the most common phenotypes (genotypes). Three CNS were methicillin-resistant and all were mecA-positive. The Staph. aureus isolates were ascribed to the following lineages [spa type/sequence type/associated clonal complex (number of isolates)]: t267/ST479/CC479 (n = 6), t1510/ST5651/CC45 (n = 1), t359/ST97/CC97/ (n = 1), t346/ST15/CC15 (n = 1), and t044/ST80 (n = 1). The mecA gene was detected in the cefoxitin-susceptible t044/ST80 isolate and co-harbored the lukF/lukS-PV and scn genes. The detection of mecA-PVL-positive Staph. aureus, methicillin-resistant CNS, and multidrug-resistant staphylococcal species indicates a potentially serious health issue and reveals that unpasteurized milk sold in Djelfa city could be a potential vehicle for pathogenic and antimicrobial-resistant staphylococci.     

Xylitol bioproduction from wheat straw: hemicellulose hydrolysis and hydrolyzate fermentation

A 2² central composite design with five center points was performed to estimate the effects of temperature (120, 130 and 140 °C) and acid loading (100, 150 and 200 mg g^?1) on the yield of monomeric xylose recovery from wheat straw hemicellulose (Y_S/RM). Under the best hydrolysis condition (140 °C and 200 mg g^?1), a Y_S/RM of 0.26 g g^?1 was achieved. After vacuum concentration and detoxification by pH alteration and active charcoal adsorption, the hydrolyzate was used as source of xylose for xylitol bioproduction in a stirred tank reactor. A xylitol production of 30.8 g L^?1 was achieved after 54 h^?1 of fermentation, resulting in a productivity (Q_P) of 0.57 g L^?1 h^?1 and bioconversion yield (Y_P/S) of 0.88 g g^?1. The maximum specific rates of xylose consumption and xylitol production were 0.19 and 0.15 g g^?1 h^?1, respectively. Copyright © 2006 Society of Chemical Industry     

Liquid chromatographic determination of caffeine and adrenergic stimulants in food supplements sold in Brazilian e-commerce for weight loss and physical fitness

Methyl-xanthines and adrenergic stimulants, such as caffeine and synephrine, are commonly added to food supplements due to their stimulating and thermogenic effects. In addition, the abusive consumption of food supplements with ergogenic and aesthetic purposes has been observed worldwide. This work describes the study of caffeine, p-synephrine, hordenine, octopamine, tyramine, ephedrine and salicin as stimulants in dietary supplements marketed in Brazil for weight loss and physical fitness claims. A total of 94 different products were acquired from 30 Brazilian websites. Thus, the sampling of marketed supplements was performed in virtual commerce (e-commerce) with claims of weight loss, appetite reduction, fat burning and metabolism acceleration. The developed analytical method involved the separation of the stimulants by HPLC with diode array detection (HPLC-DAD) by using a gradient elution of flow rate (0.7–2.5 ml min^?1) and mobile phase composition (0.1% H₃PO₄/methanol). The validated method was applied to the study of 46 dietary supplements. Caffeine, p-synephrine and ephedrine were found to be present as stimulants in 52% of the studied samples marketed as encapsulated or bulk forms. Caffeine was found to be present in concentrations that represent doses from 25.0 to 1476.7 mg day^–1. Synephrine was found in concentrations that represent doses from 59.1 to 127.0 mg day^–1. Ephedrine was found to be associated with caffeine in one formulation at a concentration representing a 26.1 mg day^–1 dosage.     

Polydextrose as Wall Material for Microencapsulation of Yacon Juice by Spray Drying

The juice from yacon roots was encapsulated by spray drying using polydextrose and gum Arabic as wall materials. The effects of the concentration of the encapsulating agents and drying temperature on total phenolics, antioxidant activity, fructooligosaccharides, moisture content, water activity, solubility, hygroscopicity, color, and morphology of the microparticles were investigated to assess the potential use of polydextrose as wall material. The microparticles produced with polydextrose showed retention of bioactive compounds and physicochemical characteristics similar to those produced with gum Arabic. The phenolic retention ranged from 73.67 to 85.49 %, and the antioxidant activity by DPPH varied from 80.78 to 90.58 %. The fructooligosaccharides have undergone little depolymerization into simple sugars even at high temperatures. With respect to the physicochemical characteristics, high stability (low moisture and water activity), low hygroscopicity, and high solubility were observed in the microparticles. The spray dried samples showed a hue angle close to 100, indicating yellow color of the particles. Regarding the microstructure, particle agglomeration was observed in both treatments, probably due to the hygroscopic characteristic of the spray dried powders.