Statewide investigation of the role of pyrethroid pesticides in sediment toxicity in California's urban waterways

A statewide investigation of urban creek sediment toxicity was conducted in California in recognition of increased incidences of toxicity linked to pyrethroid pesticides. The goals were to examine the spatial occurrence and magnitude of sediment toxicity in California urban creeks, and to examine the role of pyrethroids in toxic urban creek sediment samples. After a preliminary screening of 90 sites, 30 creeks were sampled in eight geographical regions. Sediment toxicity was assessed using 10 day bioassays with the resident amphipod Hyalella azteca. Bioassays were conducted at two test temperatures of 23 degrees C and at 15 degrees C to provide evidence of the cause of toxicity, and to more accurately reflect ambient environmental temperatures. Twenty-five of 30 samples were toxic when tested at 23 degrees C, and all 30 samples were toxic when tested at 15 degrees C. The magnitude of toxicity increased in samples tested at 15 degrees C suggesting the influence of pyrethroids, which are more toxic at colder temperatures. Pyrethroids were present in all sediment samples and were the only compounds detected at concentrations toxic to H. azteca. Bifenthrin was the pyrethroid of greatest toxicological concern, occurring in all 30 samples at concentrations up to 219 ng/g. Pyrethroid contamination of urban creeks was most severe in the Los Angeles, Central Valley, and San Diego regions, respectively. However, pyrethroids were also linked to urban creek aquatic toxicity in all regions sampled, including the less urbanized areas of the North Coast and Lake Tahoe.     

Status of the laser ion source at IMP

A laser (Nd:YAG laser, 3 J, 1064 nm, 8-10 ns) ion source has been built and under development at IMP to provide pulsed high-charge-state heavy ion beams to a radio frequency quadrupole (RFQ) for upgrading the IMP accelerators with a new low-energy beam injector. The laser ion source currently operates in a direct plasma injection scheme to inject the high charge state ions produced from a solid target into the RFQ. The maximum power density on the target was about 8.4 × 10(12) W∕cm(2). The preliminary experimental results will be presented and discussed in this paper.     

Interferometer-based structured-illumination microscopy utilizing complementary phase relationship through constructive and destructive image detection by two cameras

In an interferometer-based fluorescence microscope, a beam splitter is often used to combine two emission wavefronts interferometrically. There are two perpendicular paths along which the interference fringes can propagate and normally only one is used for imaging. However, the other path also contains useful information. Here we introduced a second camera to our interferometer-based three-dimensional structured-illumination microscope (I(5)S) to capture the fringes along the normally unused path, which are out of phase by π relative to the fringes along the other path. Based on this complementary phase relationship and the well-defined phase interrelationships among the I(5)S data components, we can deduce and then computationally eliminate the path length errors within the interferometer loop using the simultaneously recorded fringes along the two imaging paths. This self-correction capability can greatly relax the requirement for eliminating the path length differences before and maintaining that status during each imaging session, which are practically challenging tasks. Experimental data is shown to support the theory.     

Thermodynamics of carbon dioxide hydrate formation in media with broad pore-size distributions

Equilibrium pressures for the dissociation of carbon dioxide hydrates confined in silica gel pores of nominal radii 7.5, 5.0, and 3.0 nm were measured over a wide temperature range and were observed to be higher than those for bulk carbon dioxide hydrate. Models that have been previously reported in the literature are used to determine the pore radius involved in each equilibrium associated with these data, exactly reproducing the experimental equilibrium pressure. Based on these models, pore volume distributions are reconstructed and compared to those obtained from nitrogen desorption isotherms. This comparison indicates that in the nominal 7.5 nm pores the hydrate formed nearly uniformly in the available pores, while in the nominal 5.0 and 3.0 nm pores it did not.     

Studies on the surface chemistry based on competive adsorption of NOx-SO2 onto a KOH impregnated activated carbon in excess O2

This study identifies surface chemistry characteristics based on competitive behavior in the simultaneous adsorption behavior of NOx (NO rich) and SO2 using KOH impregnated activated carbon (K-IAC) in excess O2. The NOx and SO2 adsorption on K-IAC occurred mainly through the acid-base reaction. The high surface area with many pores of activated carbon acted as storage places of oxide crystal produced from NOx and SO2 adsorption. KOH, an impregnant, provided the selective adsorption sites to NOx and SO2, enabling simultaneous adsorption. However, larger amounts of SO2, with higher adsorption affinity to K-IAC compared to NOx, were adsorbed in a NOx/SO2 coexistent atmosphere. Oxygen was chemisorbed to K-IAC, which enhanced the selective adsorptivity for NO. In binary-component adsorption of NOx and SO2 on K-IAC, oxide crystals such as KNO, (x = 2,3) and K2SOx (x = 3,4) were dominantly formed through two different adsorption mechanisms by chemical reacton. Depending on the extent that oxide crystals blocked pores, compositions of oxide crystals were distributed differently according to depth.     

Adsorption characteristics of SO2 on activated carbon prepared from coconut shell with potassium hydroxide activation

The adsorption characteristics of SO2 were studied with KOH-impregnated granular activated carbon (K-IAC). To confirm selective SO2 adsorptivity of K-IAC using a fixed bed adsorption column, experiments were conducted on the effects of KOH and of linear velocity, temperature, and concentration. In addition, changes in features before and after adsorption were observed by utilizing FTIR, XRD, ToF-SIMS, and AES/SAM, examining the surface chemistry. K-IAC adsorbed 13.2 times more SO2 than did general activated carbon (GAC). The amount of SO2 adsorbed increased as linear velocity and concentration increased and as temperature decreased. At lower temperature, the dominant reaction between KOH and SO2 produces K2-SO3 and H2O. Any H2O remaining on the surface is converted into H2SO4 as SO2 and O2 are introduced. Then, the KOH and SO2 reaction produces K2SO4 and H2O. The surface characterization results proved that adsorption occurred through chemical reaction between KOH and SO2. The SO2 adsorbed K-IAC exists in the form of stable oxide crystal, K2SO3 and K2SO4, due to potassium. The basic feature given to the surface of activated carbon by KOH impregnation was confirmed to be acting as the main factor in enhancing SO2 adsorptivity.     

Antarctic springtime depletion of atmospheric mercury

Unlike other heavy metals that are inherently associated with atmospheric aerosols, mercury in ambient air exists predominantly in the gaseous elemental form. Because of its prolonged atmospheric residence time, elemental mercury vapor is distributed on a global scale. Recently, Canadian researchers have discovered that total gaseous mercury levels in the lower tropospheric boundary layer in the Canadian Arctic are often significantly depleted during the months after polar sunrise. A possible explanation may involve oxidation of elemental mercury, followed by adsorption and deposition of the oxidized form, leading to an increased input of atmospheric mercury into the Arctic ecosystem. Here we present the first continuous high-time-resolution measurements of total gaseous mercury in the Antarctic covering a 12-month period between January 2000 and January 2001 at the German Antarctic research station Neumayer (70 degrees 39' S, 8 degrees 15' W). We report that mercury depletion events also occur in the Antarctic after polar sunrise and compare our measurements with a data setfrom Alert, Nunavut, Canada. We also present indications that BrO radicals and ozone play a key role in the boundary-layer chemistry during springtime mercury depletion events in the Antarctic troposphere.     

Metabolic and endocrine changes in response to endotoxin administration with or without oral arginine supplementation

This study was performed to investigate blood metabolite, tumor necrosis factor-alpha, and hormone responses to intravenous administration of lipopolysaccharides (2 microg of endotoxin of Escherichia coli 026:B6/kg body weight at times of feeding) in veal calves orally supplemented with arginine (0.25 g/kg of body weight twice daily for 4 d; group GrA) compared with calves not supplemented with arginine (group GrC). Arginine supplementation alone caused a significant rise of plasma arginine, urea, and insulin concentrations, whereas glucagon concentrations tended to increase, but there were no significant group differences. Concentrations of triglycerides, NEFA, glucose, protein, albumin, growth hormone, insulin-like growth factor-I, 3.5.3'-triiodothyronine, and thyroxine were not affected by arginine supplementation. Lipopolysaccharide administration alone caused a rise of tumor necrosis-factor-a, lactate, and cortisol concentrations and concentrations of tumor necrosis-factor-a after 1 h, and of triglycerides and urea after 6 h were higher, whereas of glucose after 3 h were lower in GrA than in GrC. Concentrations of NEFA, glucose, protein, albumin, insulin, growth hormone, insulin-like growth factor-I, 3.5.3'-triiodothyronine, and thyroxine were not affected by lipopolysaccharide administration. In conclusion, arginine supplementation had selective effects on plasma metabolites and hormones, but barely modified lipopolysaccharide effects. Effects of lipopolysaccharides in the postprandial state were different from what is usually seen in the fasted state.     

Effect of milking frequency on DHI performance measures

Increasing production by increasing milking frequency (MF) is a management option available to dairy producers. This study examined effects of MF and interactions with region and herd size on measures of herd performance. Dairy Herd Improvement (DHI) Holstein herd summary records (n = 10,754, 10,550, and 10,438) for the years 1998, 1999, and 2000 were classified by MF: two times a day (2X) milking vs three times a day (3X); herd size: small (< 250 cows) and large (> or = 250 cows); and region: North and South. Percentage of herds milking 3X by year were 7.0, 6.7, and 7.1. Rolling herd average milk production was 16, 16, and 15% higher for herds milking 3X than herds milking 2X for the respective years. Herds milking 3X in the North region outproduced herds milking 3X in the South region. Milk fat and protein percentages were lower for herds milking 3X during all 3 yr. Differences in energy-corrected milk production between herds milking 3X and herds milking 2X were 14.5, 13.4, and 13.4% during the respective 3 yr as a result of lower component percentages for herds milking 3X. Herds milking 3X had more days open and higher actual calving intervals than herds milking 2X. Services per pregnancy for herds breeding primarily by artificial insemination were higher for herds milking 3X than for herds milking 2X. Somatic cell scores and weighted somatic cell counts were lower for herds milking 3X than herds milking 2X. Herds milking 3X had a higher percentage of somatic cell scores in the low range (0 to 3) and a lower percentage in the high range (7 to 9). Mean percentages of cows entering and leaving the herd were higher for herds milking 3X during all 3 yr.