Coaxial curved instrumentation for minimal access surgery

New coaxial curved and bayonet instruments have been designed which permit controlled dissection and directional change of the functional tip, blunt dissection and lift retraction. The instruments are introduced into the peritoneal and thoracic cavities through flexible re-usable metal cannulae. The excellent ergonomic properties of the new instruments have been confirmed by their use in major laparoscopic and thoracoscopic operations. Coaxial instruments enhance the scope of minimal access surgery and have distinct advantages over the traditional straight instruments.     

Laboratory techniques for evaluating solid oxide fuel cells

The construction of a small solid oxide fuel cell laboratory is described in terms of required materials, measuring techniques and equipment design. Details of various electrode deposition techniques and ways of making contacts to the electrodes are also outlined.     

The effect of matrix microstructure on cyclic response and fatigue behavior of particle- reinforced 2219 aluminum: Part I. room temperature behavior

The low-cycle and high-cycle fatigue behavior and cyclic response of naturally aged and overaged 2219/TiC/15p and unreinforced 2219 Al were investigated using plastic strain-controlled and stress-controlled testing. In addition, the influence of grain size on the particle-reinforced materials was examined. In both reinforced and unreinforced materials, the naturally aged conditions were cyclically unstable, exhibiting an initial hardening behavior followed by an extended region of cyclic stability and ultimately a softening region. The overaged reinforced material was cyclically stable for the plastic strains examined, while the overaged unreinforced material exhibited cyclic hardening at plastic strains greater than 2.5 × 10⁻⁴. Decreasing grain size of particle-reinforced materials modestly increased the cyclic flow stress of both naturally aged and overaged materials. Reinforced and unreinforced materials exhibited similar fatigue life behaviors; however, the reinforced and unreinforced naturally aged materials had superior fatigue lives in comparison to the overaged materials. Grain size had no effect on the fatigue life behavior of the particle-reinforced materials. The fatigue lives were strongly influenced by the presence of clusters of TiC particles and exogenous Al₃Ti intermetallics. formerly Research Assistant with the Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109 This article is based on a presentation made in the symposium entitled “Creep and Fatigue in Metal Matrix Composites” at the 1994 TMS/ASM Spring meeting, held February 28–March 3, 1994 in San Francisco, California, under the auspices of the Joint TMS-SMD/ASM-MSD Composite Materials Committee.     

A European community source of reference materials for neutron metrology requirements

Recognizing the importance of an assured supply of reference materials of high purity for use as neutron dosimeters, the Monitor Materials subgroup of the European Working Group on Reactor Dosimetry collaborated with the Central Bureau for Nuclear Measurements, Geel, Belgium to establish a list of requirements.CBNM is organizing the availability and characterization of these materials in collaboration with specialist laboratories within the European Community. At present 12 activation and 6 fission dosimetry materials are being examined prior to certification and issue.This source of materials is expected to be of great use for reactor surveillance, interlaboratory comparisons, and other neutron metrology requirements.     

Very high-order microring resonator filters for WDM applications

High-order microring resonators having from 1 to 11 coupled cavities are demonstrated. These filters exhibit low loss, flat tops, and out-of-band rejection ratios that can exceed 80 dB. They achieve performance that is suitable for commercial applications.     

Effect of material and process parameters on the mechanical properties of unidirectional and multidirectional flax/polypropylene composites

Unidirectional (UD) and multidirectional (MD) flax/polypropylene composites were studied. Flax with varying retting degree and boiled flax was used as reinforcement for the UD composites and unmodified and maleic acid anhydride modified polypropylene (MAA-PP) was used as matrix. Multidirectional flax/polypropylene composites were manufactured on laboratory scale and on pilot scale. They were made from needle-punched hybrid flax/PP non-wovens. Normally retted flax as well as boiled flax was used. For the specimens made on pilot scale, a third kind of flax, namely bleached flax was also studied. The influence of different process times and temperatures on the mechanical properties of the composites was analysed. Generally, the composites have adequate good mechanical properties. The unidirectional composites of boiled flax combined with MAA-PP show the best mechanical properties. Contrary to the UD composites, flax treatment did not lead to the expected property improvements for MD composites.