The importance of choosing attractors for optimizing chaotic communications

In this brief, we consider methods to improve the performance of chaotic communication schemes. We study a system using a receiver which explicitly includes the presence of noise in the channel. We show how the choice of chaotic dynamical system generating the transmitted signal is crucial. We observe a large variation in bit error rate performance of the system as parameters in the maps are changed, and we propose a simple explanation for this variation.     

Single and multi-specimenR-curve methods forJ IC determination of toughened nylons

For characterization of the fracture resistance of materials used in the upper shelf toughness regime,J-R curves are widely considered the most promising candidates. However, there still remain problems concerning both the generation and measurement ofJ-R curves as material characterizing parameters and their application in ductile fracture analyses for failure prediction in polymeric materials. This paper reports the results of investigations conducted on two rubbertoughened nylons at room temperature. Two different methods ofJ-R curve determination are covered, namely multi-specimen and single specimen test methods. The resultingJ-R curves have also been evaluated to obtain values of the initiation toughness,J _IC, following the extrapolation and interpolation schemes prescribed by ASTM E813-81 and ASTM E813-87 test procedures, respectively. The results show that the multiple specimen unloading method and the single specimen partial unloading compliance method can be used to generate comparable crack growth resistanceJ-R curves of the toughened nylons. The value ofJ _IC for the crystalline rubber-toughened nylon was approximately twice the value obtained for the amorphous rubber-toughened nylon. The former material also exhibited a greater resistance to ductile crack growth.     

Germicidin, an autoregulative germination inhibitor of Streptomyces viridochromogenes NRRL B-1551

During germination spores of Streptomyces viridochromogenes NRRL B-1551 excrete a compound, germicidin, which has an inhibitory effect on the germination of its own arthrospores at a concentration as low as 200 pM (40 pg/ml). At higher concentrations germicidin inhibits porcine Na+/K(+)-activated ATPase and retards the germination of the cress Lepidium sativum. Germicidin is the first known autoregulative inhibitor of spore germination in the genus Streptomyces and was isolated from the supernatant of germinated spores, but also from the supernatant of the submerged culture. Spectroscopic analysis and derivatization reactions revealed germicidin to be 6-(2-butyl)-3-ethyl-4-hydroxy-2-pyrone (C11H16O3). Crude isolates of germicidin from the supernatant of submerged culture, but not from the spores, contained a second, structurally very similar compound (C10H14O3), in which in contrast to germicidin a 2-propyl instead of the 2-butyl chain was bound to C-6 and which did not show any activity in the germination and ATPase assay. The germination assay was evaluated as a new screening model for specifically active compounds.     

Understanding the contributions of normal-fatigue and static loading to the dwell fatigue in a near-alpha titanium alloy

This article presents the results of a recent study of the response of an α/β-forged Ti-6Al-2Sn-4Zr-2Mo alloy during static, normal-fatigue, and dwell-fatigue loading. The plastic-strain accumulation under different loading conditions is reported. The failure modes and associated fractographic features under static, normal-fatigue, and dwell-fatigue loading conditions are also discussed. These results are used to obtain a better understanding of the relative contributions of the cyclic and creep processes to the overall damage under dwell-fatigue conditions.     

Production of silver‐doped analcime by isomorphous substitution technique

BACKGROUND: Metal‐exchanged zeolites have been reported to have significant limitations on cayalytic activity, such as counterbalancing the negative framework charges and limitation of active space. Alternative methods of incorporating silver ions into the framework of zeolites are therefore necessary. This paper reports on a technique for producing silver doped analcime by isomorphous substitution of silver ion into the framework of analcime. The amount of aluminium in the gel composition was reduced by a factor of 5%, 10% and 20% and an equivalent amount of silver was added to the gel and treated in a conventional manner for zeolite crystallisation. Some of the aluminium in the reaction gel was replaced with the silver. The silver‐doped analcime samples where characterised by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X‐rays (EDX), Fourier transform infrared (FTIR) spectroscopy and inductively coupled plasma‐atomic emission spectroscopy (ICP‐AES) analysis. RESULTS: The amount of silver ions loaded for each reduction of aluminium as determined by EDX were found to be (w/w) 0.29%, 1.41% and 2.10%, respectively. XRD pattern SEM images of the silver‐doped analcime showed the presence of zeolite P in addition to analcime. CONCLUSION: Silver‐doped analcime was successfully produced with different silver loadings and may exhibit higher anti‐microbial activities than silver‐exchanged counterparts. Copyright © 2008 Society of Chemical Industry     

Maternal depression and early positive parenting predict future conduct problems in young children with attention-deficit/hyperactivity disorder.

Children with attention-deficit/hyperactivity disorder (ADHD) are at risk for adverse outcomes such as substance abuse and criminality, particularly if they develop conduct problems. Little is known about early predictors of the developmental course of conduct problems among children with ADHD, however. Parental psychopathology and parenting were assessed in 108 children who first met Diagnostic and Statistical Manual of Mental Disorders (4th ed.) criteria for ADHD at 4-7 years old. When demographic variables and baseline ADHD and conduct problems were controlled, maternal depression predicted conduct problems 2-8 years following the initial assessment, whereas positive parenting during the structured parent- child interaction task predicted fewer future conduct problems. These findings suggest that maternal depression is a risk factor, whereas early positive parenting is a protective factor, for the developmental course of conduct problems among children with ADHD. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Diamond nanoseeding on silicon: Stability under H2 MPCVD exposures and early stages of growth

Detonation nanodiamond dispersed on silicon surfaces underwent different H₂ MPCVD exposures. The induced changes at the surface have been characterized in situ by XPS and XEELS. Then, a short CH₄/H₂ growth step was applied. This sequential study revealed an excellent stability of detonation nanodiamond. The sp³ etching rate is insufficient to remove nanodiamond even under intense H₂ plasma. The H₂ exposure could be successfully used to remove C–C sp² carbon without altering sp³ seeds. Moreover, the formation of silicon carbide observed after the hydrogen treatment is thought to be helpful to enhance the adhesion of nanodiamond particles on the substrate.     

Frequency-dependence of myocardial energetics in failing human myocardium as quantified by a new method for the measurement of oxygen consumption in muscle strip preparations

Diastolic dysfunction at high heart rates may be associated with increased myocardial energy consumption. Frequency-dependent changes of isometric force and oxygen consumption (MVO2) were investigated in strip preparations from endstage failing human hearts exhibiting various degrees of diastolic dysfunction. MVO2 was determined by a new method which was validated. When stimulation rate was increased from 40 to 200 min-1 (n=7), developed force decreased from 16.5+/-4.3 to 7.9+/-2.9 mN/mm2 (P<0.01), diastolic force increased from 15.9+/-3.2 to 22.0+/-3.0 mN/mm2 (P<0.01), and total MVO2 increased from 2.6+/-0.6 to 4.7+/-0.9 ml/min/100 g (P<0.025). Resting MVO2 and resting force were 1.8+/-0.4 ml/min/100 g and 15.9+/-3.0 mN/mm2, respectively. After addition of 30 mm 2,3-butanedione monoxime (BDM) to inhibit crossbridges, resting MVO2 and resting force decreased by 46% (P<0.05) and 15% (P<0.01), respectively, indicating the presence of active force generation in unstimulated failing human myocardium. In each muscle preparation, there was a significant correlation between force-time integral (FTI) and total MVO2 (r=0.96+/-0.01). The strength of these correlations did not vary with the contribution of diastolic FTI to total FTI. The ratio of activity related MVO2 to developed FTI, an inverse index of the economy of contraction, increased depending on the rise of diastolic FTI at higher stimulation rates. In conclusion, in failing human myocardium, diastolic force development is occurring at the same energy expenditure as systolic force generation. Therefore, in muscle preparations with disturbed diastolic function economy of contraction decreases with higher stimulation rates, depending on the rise of diastolic force.     

Non-peptidic HIV protease inhibitors: C2-symmetry-based design of bis-sulfonamide dihydropyrones

Potent, non-peptidic, dihydropyrone sulfonamide HIV protease inhibitors have been previously described. Crystallographic analysis of dihydropyrone sulfonamide inhibitor/HIV protease complexes suggested incorporation of a second, C2 symmetry-related sulfonamide group. Selected bis-sulfonamide dihydropyrone analogues display high HIV protease inhibitory activity.