Renal sodium excretion after oral or intravenous sodium loading in sodium-deprived normotensive and spontaneously hypertensive rats

Spontaneously hypertensive rats (SHR) and normotensive Wistar-Kyoto (WKY) rats that had been on a low sodium diet for 3 days were given 1.5 mmol sodium chloride kg-1 body weight either orally or intravenously. The rats receiving an oral sodium load showed a greater natriuresis than those receiving the same saline load intravenously. No increase of renal sodium excretion was observed when the rats received a hypertonic mannitol solution orally. The cumulative sodium excretion during the 8 h following oral loading was two to three times larger in SHR than in WKY, whereas no difference between strains could be demonstrated after giving saline intravenously. Furthermore, after switching from normal to low sodium diet the rate of decrease of renal sodium excretion was greater in SHR than in WKY rats. It is proposed that there exists a gastrointestinal sensory mechanism for sodium controlling the renal sodium excretion. Furthermore, it is suggested that the function of this mechanism differs between SHR and WKY.     

Fibrolamellar carcinoma of the liver: composition of the extracellular matrix and expression of cell-matrix and cell-cell adhesion molecules

We have analyzed the composition of the tumor stroma and the expression of cell-matrix and cell-cell adhesion molecules in 11 cases of fibrolamellar carcinoma of the liver (FLC), in comparison with 34 cases of hepatocellular carcinoma and 8 cases of focal nodular hyperplasia. Fibrolamellar carcinoma was characterized by the presence of large amounts of tenascin in tumor stroma and by the scarce expression of basement membrane components at the contact of neoplastic clusters. Like normal hepatocytes, neoplastic cells constantly expressed the alpha1 integrin chain, lacked the beta4 integrin chain, and coexpressed E-cadherin and the hepatocyte N-related cadherin. Abnormalities in the expression of cell adhesion molecules, including altered cadherin expression, alphaV integrin chain induction, and CD44 expression, were detected in the majority of cases. The composition of the tumor stroma and the pattern of expression of cell adhesion molecules in fibrolamellar carcinoma were reminiscent of those observed in grade III and grade IV hepatocellular carcinomas. Our results therefore show that, despite its slow local growth and good prognosis, fibrolamellar carcinoma expresses many characteristics usually associated with clinically aggressive malignancies. Further studies are needed to identify the factors responsible for the apparent dissociation between clinical behavior and biological characteristics in this tumor.     

Self-aligned diffusion technique for n-InP JFETs

A self-aligned diffusion process has been demonstrated in the fabrication of n-InP JFETs on semi-insulating InP. This process utilises the anisotropic and selective etching properties of InP/GaInAs materials. Using this technique, sub-micrometre gate lengths can be achieved even with conventional photolithography. Devices with trans-conductance of >35mS/mm, leakage current of < 10nA/mm and gate capacitance of <0.7pF/mm have been fabricated with a cutoff frequency of 7 GHz.     

Microstructure investigations of ball milled materials

HREM and FEG TEM were emphasized and extensively used to follow the most subtle changes in the structure and composition of ball-milled Cu, Fe-Cu, and thermally decomposed Fe60Cu40. Some significant results are obtained and summarized as follows: HREM shows that the deformation of ball-milled copper proceeds mainly by twinning and shear bands (SBs) formation. The nano-grains formed during ball milling (BM) contain a high density of dislocations. The grain boundaries (GBs) of nanocrystalline (NC) Cu prepared by BM are ordered, curved, and strained, but disordering, lattice distortion, and nanovoids in local regions were frequently observed. Nanoscale composition analysis on mechanically alloyed Fe16Cu84 shows that the average Fe content in both the interior of grains and the GBs is close to the designed composition, which proves that a supersaturated solid solution has really formed. However, the Fe content is rather inhomogeneous between the larger and smaller grains, which infers the inhomogeneous mixing of Fe and Cu during mechanical alloying (MA). NC structure and the mechanical force-enhanced fast diffusion are the reasons of the formation of supersaturated solid solutions in immiscible systems with positive enthalpy of mixing. HREM observations carried out with the thermally decomposed Fe60Cu40 solid solution show that the Nishiyama (N-W) or Kurdyumov-Sachs (K-S) orientation relationships exist between alpha-Fe and Cu. Energy dispersive X-ray spectra (EDXS) results show that the Cu content in these alpha-Fe grains reaches as high as 9.5 at.% even after heating to 1,400 degrees C, which is even higher than the maximum solubility of Cu in gamma-Fe at 1,094 degrees C.     

A simplified dispersion limit formula for IM/DD systems and itscomparison with experimental results

A simplified formula for the dispersion limit of single-mode-fiber intensity modulation/direct detection (IM/DD) systems is derived for arbitrary given normalized pulse width U, eye opening penalty X and source linewidth enhancement factor α. From the comparison with published theoretical analyses, computer simulation and experimental data, its validity and the limits of existing formulae are shown. Using this simple and general formula, one can easily obtain the dispersion limit of various fiber types under different working conditions in IM/DD systems     

从光合作用的倒掉说起

席殊书屋、第三级书局走了,风入松、纸老虎世纪城店关了,我没太在意。2010年10月底,有着36家连锁店的光合作用竟然也宣告倒闭了!我终于淡定不起来了。清华大学出版社零售产品经理王川（简称川）清华大学出版社图书编辑刘青（简称刘）记者Justdo（简称J）新华书店＋网购是必然趋势J：光合作用倒闭了,你们惊讶吗？刘：其实我挺惊讶,因为我常去,特别是五道口那家店,从刚开业起就经常去逛。     

Incorporating Actor-Critic in Monte Carlo tree search for symbolic regression

Neural Computing and Applications - Most traditional genetic programming methods that handle symbolic regression are random algorithms without memory and direction. They repeatedly search for the...     

Effect of nitrogen and nickel on the stability of an Fe-12Cr-23Mn austenitic steel

The effect of nitrogen and nickel on the austenite stability and the structural changes as a result of cold work of an Fe-12Cr-23Mn alloy steel has been examined by transmission electron microscopy and X-ray analysis. Prestrain was performed either at room temperature or at 200° C. Final strain was carried out at liquid nitrogen temperature. The volume fraction of strain-induced martensite decreased by 40% and 12% due to the addition of 2.43% Ni and 0.11% N, respectively, despite whether prestrain was performed or not. The mechanisms are discussed in terms of the phase, stacking faults, dislocation cells and dislocation tangles induced by prestrain and final strain.     

低电压氧化锌压敏电阻器的研究

研究了一种制造低电电压氧化锌压敏电阻器的方法。在基本成分的基础上适当加入二氧化钛可降低梯度电压（Ｖ１ｍＡ／ｍｍ），适量掺硼和改进热处理工艺可减小元件的漏电流和提高其稳定性。     

Mold-filling characteristics of AZ91 magnesium alloy in the low-pressure expendable pattern casting process

The magnesium (Mg) alloy low-pressure expendable pattern casting (EPC) process is a newly developed casting technique combining the advantages of both EPC and low-pressure casting. In this article, metal filling and the effect of the flow quantity of inert gas on the filling rate in the low-pressure EPC process are investigated. The results showed that the molten Mg alloy filled the mold cavity with a convex front laminar flow and the metal-filling rate increased significantly with increasing flow quantity when flow quantity was below a critical value. However, once the flow quantity exceeded a critical value, the filling rate increased slightly. The influence of the flow quantity of inert gas on melt-filling rate reveals that the mold fill is controlled by flow quantity for a lower filling rate, and, subsequently, controlled by the evaporation of polystyrene and the evaporation products for higher metal velocity. Meanwhile, the experimental results showed that the melt-filling rate significantly affected the flow profile, and the filling procedure for the Mg alloy in the low-pressure EPC process. A slower melt-filling rate could lead to misrun defects, whereas a higher filling rate results in folds, blisters, and porosity. The optimized filling rate with Mg alloy casting is 140 to 170 mm/s in low-pressure EPC.