Reactive surfactants in heterophase polymerization. XVII. Influence of the surfactant on the mechanical properties and hydration of the films

In the context of a European union‐supported network on “Reactive Surfactants for Heterophase Polymerization,” different polymerizable surfactants (surfmers) have been synthesized and engaged in the emulsion polymerization of styrene, butyl acrylate, and acrylic acid. The thermomechanical properties of films cast from these different latices are reported in this article. The evolution of the mechanical properties with temperature and the effect of water molecules on these properties are studied. We observed that the studied surfactants do not influence the properties of the dry films. However, some differences due to grafting of reactive surfactants appeared when the films were wet. The amount of water uptake is drastically decreased when only reactive surfactants are present in the film. Concerning the mechanical behavior of the wet films, a decrease of the plastic flow stress is observed for all the samples whatever the nature of the surfactant (reactive or conventional). Hence, calorimetric measurements and dynamic mechanical analysis are used to identify the possible mechanisms that induce the change in the mechanical behavior of the latex films. In the case of reactive surfactant grafted to the polymer, the very low value of water uptake is accompanied by a plasticization of the polymer. In contrast, no plasticizing effect is observed in the case of nonreactive surfactant, even if the amount of water is very large. Finally, the tensile behavior of the styrene–butyl acrylate copolymer versus temperature is analyzed in the frame of the quasi point defects (qpd) model. Both rubber elasticity and chain orientation effects are taken into account to describe the behavior laws at large extensions (i.e., ? ≈ 1.2). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1686–1700, 2002; DOI 10.1002/app.10548     

MPaaS: Mobility prediction as a service in telecom cloud

Mobile applications and services relying on mobility prediction have recently spurred lots of interest. In this paper, we propose mobility prediction based on cellular traces as an infrastructural level service of telecom cloud. Mobility Prediction as a Service (MPaaS) embeds mobility mining and forecasting algorithms into a cloud-based user location tracking framework. By empowering MPaaS, the hosted 3rd-party and value-added services can benefit from online mobility prediction. Particularly we took Mobility-aware Personalization and Predictive Resource Allocation as key features to elaborate how MPaaS drives new fashion of mobile cloud applications. Due to the randomness of human mobility patterns, mobility predicting remains a very challenging task in MPaaS research. Our preliminary study observed collective behavioral patterns (CBP) in mobility of crowds, and proposed a CBP-based mobility predictor. MPaaS system equips a hybrid predictor fusing both CBP-based scheme and Markov-based predictor to provide telecom cloud with large-scale mobility prediction capacity.     

Glass transition relations in ionomeric “comb” polymers

The glass transition temperatures (T_g) and dynamic mechanical properties of random copolymers of styrene-4-vinylpyridine quaternized with iodoalkanes are presented for vinylpyridine contents up to ten percent and pendant alkyl chains up to ten carbons in length. Two linear relationships, between ion content and glass transition temperature and between pendant alkyl chain length and the T_g, are observed. An equation is presented that can be used to predict the T_g for such copolymers based on their ion contents and alkyl chain lengths.     

Kinetic analysis of cellular internalization and expulsion of unstructured D-chirality cell penetrating peptides

Most cell penetrating peptides (CPPs) are unstructured and susceptible to proteolytic degradation. One alternative is to incorporate D-chirality amino acids into unstructured CPPs to allow for enhanced uptake and intracellular stability. This work investigates CPP internalization using a series of time, concentration, temperature, and energy dependent studies, resulting in a three-fold increase in uptake and 50-fold increase in stability of D-chirality peptides over L-chirality counterparts. CPP internalization occurred via a combination of direct penetration and endocytosis, with a percentage of internalized CPP expelling from cells in a time-dependent manner. Mechanistic studies identified that cells exported the intact internalized D-chirality CPPs via an exocytosis independent pathway, analogous to a direct penetration method out of the cells. These findings highlight the potential of a D-chirality CPP as bio-vector in therapeutic and biosensing applications, but also identify a new expulsion method suggesting a relationship between uptake kinetics, intracellular stability, and export kinetics.     

Use of the omentum in the treatment of chronic thoracic empyema

Thoracic empyema (development of suppuration in the thoracic cavity, usually after pneumonectomy) remains a serious complication which is difficult to treat. Failure of classical procedures (lavage-drainage) in the treatment of certain forms of pleural empyema (post-pulmonary resections), with or without associated fistula, led the authors to use the pedicled omental flaps filling material for the chronic empyema cavity. They report their experience (6 cases over a period of 4 years) and define the indications. Omentoplasty has a real place, next to myoplasty, in the therapeutic arsenal for chronic empyema due to its detersion capacity, particularly useful in a "septic" context and because of its volume which is usually sufficient in retracted cavities. The existence of an associated bronchial fistula, history of radiotherapy, posterolateral thoracostomy (sectioned latissimus dorsi) are additional reasons to prefer omentoplasty over myoplasty.     

DNA-Directed alkylating agents. 7. Synthesis, DNA interaction, and antitumor activity of bis(hydroxymethyl)- and bis(carbamate)-substituted pyrrolizines and imidazoles

A series of bis(hydroxymethyl)-substituted imidazoles, thioimidazoles, and pyrrolizines and related bis(carbamates), linked to either 9-anilinoacridine (intercalating) or 4-(4-quinolinylamino)benzamide (minor groove binding) carriers, were synthesized and evaluated for sequence-specific DNA alkylation and cytotoxicity. The imidazole and thioimidazole analogues were prepared by initial synthesis of [(4-aminophenyl)alkyl]imidazole-, thioimidazole-, or pyrrolizine dicarboxylates, coupling of these with the desired carrier, and reduction to give the required bis(hydroxymethyl) alkylating moiety. The pyrrolizines were the most reactive alkylators, followed by the thioimidazoles, while the imidazoles were unreactive. The pyrrolizines and some of the thioimidazoles cross-linked DNA, as measured by agarose gel electrophoresis. Strand cleavage assays showed that none of the compounds reacted at purine N7 or N3 sites in the gpt region of the plasmid gpt2Eco, but the polymerase stop assay showed patterns of G-alkylation in C-rich regions. The corresponding thioimidazole bis(carbamates) were more selective than the bis(hydroxymethyl) pyrrolizines, with high-intensity bands at 5'-NCCN, 5'-NGCN and 5'-NCGN sequences in the PCR stopping assay ( indicates block sites). The data suggest that these targeted compounds, like the known thioimidazole bis(carbamate) carmethizole, alkylate exclusively at guanine residues via the 2-amino group, with little or no alkylation at N3 and N7 guanine or adenine sites. The cytotoxicities of the compounds correlated broadly with their reactivities, with the bis(hydroxymethyl)imidazoles being the least cytotoxic (IC50s >1 microM; P388 leukemia) and with the intercalator-linked analogues being more cytotoxic than the corresponding minor-groove-targeted ones. This was true also for the more reactive thioimidazole bis(carbamates) (IC50s 0.8 and 11 microM, respectively), but both were more active than the analogous "untargeted" carmethizole (IC50 20 microM). The bis(hydroxymethyl)pyrrolizine analogues were the most cytotoxic, with IC50s as low as 0.03 microM.     

Diagnosis of pulmonary infections in mechanically ventilated patients

The optimal management strategy for ventilator-dependent patients who develop symptoms suggestive of lung infection remains controversial. Proponents of the empirical approach prefer to treat most patients with fever and pulmonary infiltrates with one or more new antibiotics, even if it may be difficult (1) to determine whether pneumonia has developed in such patients, (2) in case of infection, to precisely identify the responsible microorganisms and thereby select the optimal antimicrobial treatment, and (3) to avoid resorting to broad-spectrum drug coverage in patients without true infection. Our personal bias is that using bronchoscopic techniques to obtain protected specimen brush and bronchoalveolar lavage specimens from the affected area in the lung permits to devise a therapeutic strategy superior to the one based only on clinical evaluation. These bronchoscopic techniques, when they are performed before new antibiotics are administered, enable physicians to identify most patients who need immediate treatment and select optimal therapy, in a manner that is safe and well tolerated by patients. Furthermore, they frequently permit the clinician to withhold antimicrobial treatment in patients without infection, minimizing the risk of the emergence of resistant microorganisms in the intensive care unit. In patients with clinical evidence of severe sepsis, the initiation of antibiotic therapy should not, however, be delayed while awaiting bronchoscopy, and patients should be given immediate treatment with antibiotics. In that case, "simplified" non-bronchoscopic diagnostic procedures might allow obtaining reliable distal pulmonary secretions for quantitative cultures on a 24-hour basis just before the initiation of a new antimicrobial therapy.     

Modular architecture of the microfactories for automatic micro-assembly

The construction of a new generation of MEMS which includes micro-assembly steps in the current microfabrication process is a big challenge. It is necessary to develop new production means named micromanufacturing systems in order to perform these new assembly steps. The classical approach called “top-down” which consists in a functional analysis and a definition of the tasks sequences is insufficient for micromanufacturing systems. Indeed, the technical and physical constraints of the microworld (e.g. the adhesion phenomenon) must be taken into account in order to design reliable micromanufacturing systems. A new method of designing micromanufacturing systems is presented in this paper. Our approach combines the general “top-down” approach with a “bottom-up” approach which takes into account technical constraints. The method enables to build a modular architecture for micromanufacturing systems. In order to obtain this modular architecture, we have devised an original identification technique of modules and an association technique of modules. This work has been used to design the controller of an experimental robotic micro-assembly station.     

Transient temperature responses of hydronic radiant floor heating system by different pipe embedding depth and water supply condition

"Ondol" is a Korean unique heating system. It is a specific radiant floor heating system using combustion heat of briquette or timber in Korea. Such traditional "Ondol" is changed to radiant heating system with pipe-coil embedded in the floor or slab. This study has contributed to the understandings of the transient behaviours of Ondol-heated floor panels and enclosure exposed to this type of heating system. The result is that the water supply temperature had a large effect on the rate of increase in floor surface and room air temperature. But, in spite of a higher water supply temperature, the heat flow rate was not increased considerably. The shallow pipe embedding depths, of course, result in a low heat flow rate.     

Developing English domestic occupancy profiles

ABSTRACT

Occupancy patterns are necessary to estimate energy demand and evaluate thermal comfort in households. Because of this, many European countries are developing representative domestic schedules to replace outdated criteria. This paper evaluates the state of knowledge of UK domestic occupancy patterns and develops new domestic occupancy profiles for England. The presented research (1) characterizes methods for collecting occupancy data and inferring patterns; (2) identifies and assesses the quality of categories of occupancy patterns used in building simulation; and (3) develops updated occupancy profiles. A systematic scoping review identified social and monitoring surveys as the most deployed data-collection methods. A systematic literature review also established that the occupancy categories most frequently used in UK building simulation are (a) a family with dependent children where the parents work full time; and (b) a retired elderly couple who spend most of their time indoors. The interview sample from the English Housing Survey 2014–15 was used to map household typologies. Results show that categories (a) and (b) combined amount to only 19% of England’s households, which suggest models are over-reliant on these groups. Considering this result, the paper develops occupancy patterns for England derived from 2015 UK Time Use Survey diaries for each household typology previously identified.