Error Concealment Based on Semantic Prioritization with Hardware‐Based Face Tracking

With video compression standards such as MPEG‐4, a transmission error happens in a video‐packet basis, rather than in a macroblock basis. In this context, we propose a semantic error prioritization method that determines the size of a video packet based on the importance of its contents. A video packet length is made to be short for an important area such as a facial area in order to reduce the possibility of error accumulation. To facilitate the semantic error prioritization, an efficient hardware algorithm for face tracking is proposed. The increase of hardware complexity is minimal because a motion estimation engine is efficiently re‐used for face tracking. Experimental results demonstrate that the facial area is well protected with the proposed scheme.     

Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities

The synthesis of a p‐toluidine/formaldehyde (PTF) resin was performed, and the effects of the molar ratio of the individual monomers and the polymerization conditions on the structure of the PTF resin were studied. Fourier transform infrared and ¹³C‐NMR spectra were used to characterize the PTF. Wide‐angle X‐ray diffraction patterns revealed the crystalline structures of various PTFs. Polarized optical microscopy revealed that the molar ratio of the monomers had a strong effect on the crystalline morphologies. A longer polymerization time turned out a polymer with a higher intrinsic viscosity and molecular weight, which led to differences in the proton conductivity. All of the PTFs showed a higher proton conductivity than a commercial Nafion membrane at 90–100°C and 0% relative humidity. The proton conductivity of the PTF series could be improved by sulfonation with sulfuric acid and could be maintained after blending with polyurethane. Pure methanol could be used as a fuel source because of the insolubility and nonwetting properties of PTF in methanol to increase the output current density for a PTF membrane electrode assembly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Effects of alloying elements on fracture toughness in the transition temperature region of base metals and simulated heat-affected zones of Mn-Mo-Ni low-alloy steels

This study is concerned with the effects of alloying elements on fracture toughness in the transition temperature region of base metals and heat-affected zones (HAZs) of Mn-Mo-Ni low-alloy steels. Three kinds of steels whose compositions were varied from the composition specification of SA 508 steel (grade 3) were fabricated by vacuum-induction melting and heat treatment, and their fracture toughness was examined using an ASTM E1921 standard test method. In the steels that have decreased C and increased Mo and Ni content, the number of fine M₂C carbides was greatly increased and the number of coarse M₃C carbides was decreased, thereby leading to the simultaneous improvement of tensile properties and fracture toughness. Brittle martensite-austenite (M-A) constituents were also formed in these steels during cooling, but did not deteriorate fracture toughness because they were decomposed to ferrite and fine carbides after tempering. Their simulated HAZs also had sufficient impact toughness after postweld heat treatment. These findings indicated that the reduction in C content to inhibit the formation of coarse cementite and to improve toughness and the increase in Mo and Ni to prevent the reduction in hardenability and to precipitate fine M₂C carbides were useful ways to improve simultaneously the tensile and fracture properties of the HAZs as well as the base metals.     

High affinity hormone binding to the extracellular N-terminal exodomain of the follicle-stimulating hormone receptor is critically modulated by exoloop 3

The human follicle-stimulating hormone receptor (FSH-R) consists of two distinct domains of >330 amino acids, the N-terminal extracellular exodomain and membrane-associated endodomain. The exodomain alone binds hormone with high affinity, whereas the endodomain is the site of receptor activation. Coordination of these two domains is essential for successful hormone action but little is known about their functional and structural relationship. In this communication, we report that exoloop 3 of FSH-R constrains follicle-stimulating hormone binding to the exodomain. When the FSH-R exodomain was prepared by truncating its endodomain, the hormone binding affinity of the exodomain was slightly improved, compared with the wild type receptor. The binding affinity was further improved by >3-fold when the exodomain was attached to the membrane-associated domain of CD8. These results suggest that the FSH-R endodomain attenuates hormone binding at the exodomain. As a first step to test this hypothesis, the 11 amino acids except Ala589 of exoloop 3 were individually substituted with Ala. Ala substitution for Leu583 or Ile584 improved the hormone binding affinity by 4-6-fold while totally abolishing cAMP induction, indicating an inverse relationship. The Ala substitution for Lys580 or Pro582 had a similar trend but to a lesser extent. This significant improvement in the binding affinity suggests that the four residues at the N-terminal region of exoloop 3 interact with the exodomain and constrain the hormone binding in the wild type receptor. This effect is specific since substitutions for other than the 4 residues did not improve the hormone binding affinity. Computer modeling shows that the 4 residues can be positioned on one side of exoloop 3. This result and the apparent inverse relationship of hormone binding and cAMP induction suggest that these two essential functions may work against each other. Therefore, hormone binding might be compromised to preserve cAMP inducibility while maintaining a reasonably high, but below maximum, binding affinity.     

Effects of changes in strain path on the anisotropy of yield stresses of low-carbon steel and 70-30 brass sheets

Uniaxial tensile tests in various directions following uniaxial extension, equibiaxial stretching or plane strain rolling have been performed to study the effects of changes in strain path on the anisotropy of yield stresses of aluminium-killed low-carbon steel and 70-30 brass sheets. The anisotropy could be predicted from the specimen textures, if dislocation structure were equiaxed, as in the case of equibiaxial stretching. However, elongated dislocation cell structures, developed in the steel specimens prestrained in uniaxial tension or plane strain rolling, gave rise to the second-stage yield stresses higher than predicted from textures in the directions different from the maximum prestrain direction. Planar dislocation structures in the brass specimens prestrained in uniaxial tension or plane strain rolling gave the second-stage yield stresses lower than predicted from the textures in the directions different from the maximum prestrain direction. The phenomena are discussed based on textures and dislocation structures.     

Motion based object tracking with mobile camera

An efficient algorithm which detects and tracks a moving object is proposed. The global motion energy caused by camera movement is eliminated by finding the maximal matching position with the cross-correlation value between two consecutive frames using the spiral scanning technique. The region of a moving object is segmented exactly by combining the results of the temporal derivatives and edge map from one image, and the actual centroid of the moving object is determined as the mid-point of the cumulative distribution of the projection profile of the region     

Development of a physics analysis procedure for the prismatic very high temperature gas-cooled reactors

A new physics analysis procedure has been developed for a prismatic very high temperature gas-cooled reactor based on a conventional two-step procedure for the PWR physics analysis. The HELIOS and MASTER codes were employed to generate the coarse group cross sections through a transport lattice calculation, and to perform the 3-dimensional core physics analysis by a nodal diffusion calculation, respectively. Physics analysis of the prismatic VHTRs involves particular modeling issues such as a double heterogeneity of the coated fuel particles, a neutron streaming in the coolant channels, a strong core-reflector interaction, and large spectrum shifts due to changes of the surrounding environment and state parameters. Double heterogeneity effect was considered by using a recently developed reactivity-equivalent physical transformation method. Neutron streaming effect was quantified through 3-dimensional Monte Carlo transport calculations by using the MCNP code. Strong core-reflector interaction could be handled by applying an equivalence theory to the generation of the reflector cross sections. The effects of a spectrum shift could be covered by optimizing the coarse energy group structure. A two-step analysis procedure was established for the prismatic VHTR physics analysis by combining all the methodologies described above. The applicability of our code system was tested against core benchmark problems. The results of these benchmark tests show that our code system is very accurate and practical for a prismatic VHTR physics analysis.     

Dichotomous behavior of polymer melts in isothermal melt spinning

Isothermal melt spinning experiments have been conducted using two polyethylene melts of low density (LDPE) and high density (HDPE) to produce steady state spinline profiles. The data revealed the threadline extensional viscosity exhibiting a contrasting picture : extension thickening behavior for LDPE and extension thinning one for HDPE. A White-Metzner model having a strain rate-dependent relaxation time was then found to be able to simulate this dichotomy in melt spinning fairly well: the fluids whose relaxation times have smaller strain rate-dependence can fit LDPE data with extension thickening extensional viscosity whereas the fluids whose relaxation times have larger strain rate-dependence can fit HDPE data with extension thinning extensional viscosity. This dichotomous nature of viscoelastic fluids is also believed to be able to explain other similar contrasting phenomena exhibited by polymer melts, such as vortex/no vortex in entry flows, cohesive/ductile fracture modes in extension, and more/less stable draw resonance than Newtonian fluids.     

Perioperative specific management of blood volume loss in craniosynostosis surgery

Accurate assessment and replacement of blood loss and fluid-electrolyte deficit during craniosynostosis repair is difficult owing to patient size and the diversity of surgical technique. Forty-three patients undergoing primary craniosynostosis repair over a 10-year period were studied retrospectively to determine blood loss and fluid deficit and to assess blood transfusion practices during both intraoperative and postoperative periods. Blood loss was calculated on the basis of estimated red cell mass (ERCM) and fluid-electrolyte imbalance was investigated with blood samplings. Blood transfusion was considered appropriate if the postoperative or posttransfusion ERCM was within 12% of the preoperative value. Estimated fluid requirement (EFR) was used in 4 ml kg(-1) h(-1) except for neonates. Intraoperatively, 80% of all patients were appropriately managed with respect to blood transfusion and EFR. Postoperatively only 20% of the patients receiving transfusions were transfused appropriately. In 23.3% of these patients (10/43) unexpected respiratory distress developed immediately after their recovery from the anesthesia. With the measurement of estimated blood volume and allowable blood loss, appropriate transfusion could be achieved for the successful treatment of the primary craniosynostosis.     

High-performance simulations of turbulent boundary layer flow using Intel Xeon Phi many-core processors

The Journal of Supercomputing - Direct numerical simulations (DNS) of turbulent flows have increasing importance because they not only provide fundamental understanding of turbulent flows but also...