Fatigue crack monitoring of riveted aluminium strap joints by Lamb wave analysis and acoustic emission measurement techniques

Statistics show that fatigue crack development comes first and foremost as a damage source in aerospace metallic structures. Currently, widespread methods are available to inspect these structures, but they are quite time-consuming, costly and require the structural system to be idle. Next, attempts to develop damage detection integrated systems are paramount for the safety and cost of such structures. This paper describes an investigation into the feasibility of using an integrated system based on Lamb waves in order to assess the integrity of riveted aluminium joints during cyclical loading. In this experimental analysis, Lamb waves are excited and received outside the joint area using piezoelectric transducers coupled onto the plates. The detected damage is cracks in joint resulting from fatigue loading. The collected signals on the piezoelectric transducers are analysed using Hilbert transform and time–frequency analysis. It is shown that the final interpretation of Lamb wave analysis may provide a means of sizing the defects and following the crack development. In addition to that, an acoustic emission system is used jointly with the Lamb wave analysis in order to discuss results and damage development. Finally, it is demonstrated that both methods can work together and the results obtained are in good agreement.     

Oxy‐fuel combustion technology: current status,applications, and trends

The increased level of emissions of carbon dioxide into the atmosphere due to burning of fossil fuels represents one of the main barriers toward the reduction of greenhouse gases and the control of global warming. In the last decades, the use of renewable and clean sources of energies such as solar and wind energies has been increased extensively. However, due to the tremendously increasing world energy demand, fossil fuels would continue in use for decades which necessitates the integration of carbon capture technologies (CCTs) in power plants. These technologies include oxycombustion, pre‐combustion, and post‐combustion carbon capture. Oxycombustion technology is one of the most promising carbon capture technologies as it can be applied with slight modifications to existing power plants or to new power plants. In this technology, fuel is burned using an oxidizer mixture of pure oxygen plus recycled exhaust gases (consists mainly of CO₂). The oxycombustion process results in highly CO₂‐concentrated exhaust gases, which facilitates the capture process of CO₂ after H₂O condensation. The captured CO₂ can be used for industrial applications or can be sequestrated. The current work reviews the current status of oxycombustion technology and its applications in existing conventional combustion systems (including gas turbines and boilers) and novel oxygen transport reactors (OTRs). The review starts with an introduction to the available CCTs with emphasis on their different applications and limitations of use, followed by a review on oxycombustion applications in different combustion systems utilizing gaseous, liquid, and coal fuels. The current status and technology readiness level of oxycombustion technology is discussed. The novel application of oxycombustion technology in OTRs is analyzed in some details. The analyses of OTRs include oxygen permeation technique, fabrication of oxygen transport membranes (OTMs), calculation of oxygen permeation flux, and coupling between oxygen separation and oxycombustion of fuel within the same unit called OTR. The oxycombustion process inside OTR is analyzed considering coal and gaseous fuels. The future trends of oxycombustion technology are itemized and discussed in details in the present study including: (i) ITMs for syngas production; (ii) combustion utilizing liquid fuels in OTRs; (iii) oxy‐combustion integrated power plants and (iv) third generation technologies for CO₂ capture. Techno‐economic analysis of oxycombustion integrated systems is also discussed trying to assess the future prospects of this technology. Copyright © 2017 John Wiley & Sons, Ltd.     

Microbial fuel cells for bioelectricity generation through reduction of hexavalent chromium in wastewater: A review

The study proposes the use of microbial fuel cell (MFC) technology to reduce toxic Cr(VI) present in industrial wastewater to less toxic trivalent chromium [Cr(III)], while generating electricity through a bioelectrochemical oxidation-reduction process. Factors influencing the treatment process and electricity generation include the concentration of Cr(VI) in wastewater, substrate types used for anodes, types of microorganisms involved, types of cathode and anode, surface area of the cathode and anode, and pH and temperature of cathodic and anodic solutions. While other heavy metals in wastewater may be removed by MFC technology, Cr(VI) removal is more efficient in terms of electricity generation. Previous research indicated that the maximum electrical power generated by Cr(VI) removal through the use of MFCs is 1600 mW/m², which is expected to increase as the factors affecting this process are optimized. Based on current data, MFC-based electricity generation along with Cr(VI) removal is a potential future source of sustainable energy. However, research priorities need to focus on reducing the cost of MFC technology by using economical and effective materials and increasing electricity production.     

Electrophoretic deposition of graphene oxide on carbon brush as bioanode for microbial fuel cell operated with real wastewater

Microbial fuel cell (MFC) is a promising technology for simultaneous wastewater treatment and energy harvesting. The properties of the anode material play a critical role in the performance of the MFC. In this study, graphene oxide was prepared by a modified hummer's method. A thin layer of graphene oxide was incorporated on the carbon brush using an electrophoretic technique. The deoxygenated graphene oxide formed on the surface of the carbon brush (RGO-CB) was investigated as a bio-anode in MFC operated with real wastewater. The performance of the MFC using the RGO-CB was compared with that using plain carbon brush anode (PCB). Results showed that electrophoretic deposition of graphene oxide on the surface of carbon brush significantly enhanced the performance of the MFC, where the power density increased more than 10 times (from 33 mWm^?2 to 381 mWm^?2). Although the COD removal was nearly similar for the two MFCs, i.e., with PCB and RGO-CB; the columbic efficiency significantly increased in the case of RGO-CB anode. The improved performance in the case of the modified electrode was related to the role of the graphene in improving the electron transfer from the microorganism to the anode surface, as confirmed from the electrochemical impedance spectroscopy measurements.     

Flower-like architecture of CoSn4 nano structure as anode in lithium ion batteries

CoSn₄ nano-particles were synthesized on Cu and Ni substrates through pulsed current electrodeposition and used as anode in lithium ion batteries. Nano particles with Flower-like morphology were obtained through applying an average current density of 85 mA/cm² on Ni substrate while the particles formed using constant current electrodeposition are greater in size ca. 500 nm. Optimum discharge capacity of synthesized CoSn₄ was obtained 848 mAh g^?1 which reduced to 500 mAh g^?1 at 120th cycle indicating an enhanced electrochemical performance compared to anode films synthesized through other pulsed current densities and also constant current electrodeposition. This high discharge capacity and cycleability is attributed to finer crystal grains and flower-like morphology of nano particles. Also, the sample synthesized on Ni substrate showed higher cycleability and noticeably lower resistance. High resistance of anode film synthesized on Cu substrate is due to the corrosion and passivation of copper occurred by HF formation in LiPF₆ electrolyte.     

Sargassum swartzii extracts ameliorate memory functions by neurochemical modulation in a rat model

Food Science and Biotechnology - Recently, considerable attention has been paid to drug exploration from natural sources for treating memory loss, a major manifestation of various neurodegenerative...     

A review on thermo-chemical characteristics of coal/biomass co-firing in industrial furnace

Biomass should be considered as one of the promising sources of energy for mitigating greenhouse gas (GHG) emissions. Co-firing biomass with coal has become a solution for meeting the power crisis as well as to reduce the pollutant emissions. The biomass fuels typically found from woody to grassy and solid recovered fuels depending on its origin and properties. It is suggested that co-firing coal with biomass has a substantial effect on SO_x and NO_x emission level. The ashing process, fly ash quality depends on the conversion technology, capture technology and the properties of the biomass. In order to control the furnace efficiency and production, burnout, optimum injection of biomass sharing with specific information of particle ignition properties are also important. A number of small/laboratory scale and industrial scale experiments have been conducted by different researchers. Different experimental studies performed are reviewed, grouped and summarized based on the fuel processing technology, burnout performance, emission level, environmental aspect, ash information and deposit characteristics, effect of co-firing ratios and adoption of oxy-fuel co-firing. Overall, this paper will highlight existing technologies and emerging trends in co-firing of different types of biomass which will be helpful for future investigations.     

纤维基材料的仿生学研究动向

纤维基技术的应用对仿生学的成功发展呈现出巨大的潜力,因为宇宙成物在生长过程、多毛结构和增强纤维方面具有许多相似性.约七年前,邓肯道夫纺织技术与工艺研究所协同众位生物学家一起开创了仿生学的研发,至今方兴未艾.     

Performance‐based evaluations of the tangible benefits of information networks with applications

This paper provides a new methodology for the evaluation of the tangible benefits of information networks, based on their utilization and performance. The methodology enables the evaluation of different tangible benefits including those resulting from time, movement, paper, and space savings. Copyright © 2000 John Wiley & Sons, Ltd.     

Analysis of the cost‐effectiveness of information networks with applications

This paper presents a methodology for the analysis of the cost‐effectiveness of information networks over a period of time. The cost‐effectiveness is considered to be associated with use‐dependent and use‐independent costs and benefits. Copyright © 2000 John Wiley & Sons, Ltd.