Quantitative reflectometry of the ocular fundus

This review shows that quantitative measurements of fundus reflectance can be described by models that explicitly incorporate anatomical and physical properties of the fundus tissue. Newer techniques examine the fundus in ways fundamentally different from conventional optics, and must be included in this approach of measurement and modeling. The importance of the “inner surface reflector” (ISR) for tomographic imaging warrants more study of its optical properties, particularly its directional reflectance. For example, because the surface of a glaucomatous optic disc can slope steeply into the cup, the directional reflectance of the ISR may affect its apparent topography and thus the reproducibility of measurements of cup size     

Scattering from coated targets using a frequency-dependent, surfaceimpedance boundary condition in FDTD

One method for reducing the radar cross section of objects such as aircraft and missiles is the application of a lossy coating. Computing scattering from targets coated with dielectric/magnetic materials is challenging due to the reduced wavelengths of an incident field inside the coating. These smaller wavelengths require finer sampling of the fields. A technique for implementing this calculation without greatly increased memory requirements or computation times has previously been developed using a finite-difference time-domain (FDTD) code which has been tested in one, two, and three dimensions. The method requires knowledge of the frequency behaviour of the complex permittivity and permeability, and the thickness of the dielectric coating and is applicable to thin coatings when one or more reflections from the conducting surface are significant. The impedance at the surface of the coating is computed based on the given information and then approximated using a summation of causal functions. The approximated impedance is Z-transformed and added to the FDTD code in special update equations for the fields at the surface of the coating. No computations are required inside the coatings so the FDTD grid can be sized based on the free-space wavelength. The result obtained is valid over the entire frequency range of interest, assuming that the approximated surface impedance is a good match over the entire range. Comparisons with measurements of a scale model coated missile show good agreement and almost no increase in resource requirements over a standard FDTD calculation for an uncoated metal target     

Controlled oxygen incorporation in indium gallium arsenide and indium phosphide grown by metalorganic vapor phase epitaxy

The defect engineering in metalorganic vapor phase epitaxy In_xGa_1-xAs and InP by controlled oxygen doping using diethyl aluminum ethoxide (DEALO) was developed in this study. DEALO doping has led to the incorporation of Al and O, and the compensation of shallow Si donors in In_xGa_1−xAs: Si with 0 ≤ x ≤ 0.25. With the same DEALO mole fraction during growth, the incorporation of Al and O was found to be independent of x, but the compensation of Si donors decreases with increasing In content. Deep level transient spectroscopy analysis on a series of In_xGa_1-xAs: Si. samples with 0 ≤ x ≤ 0.18 revealed that oxygen incorporation led to a set of deep levels, similar to those found in DEALO doped GaAs. As the In composition was increased, one or more of these deep levels became resonant with the conduction band and led to a high electron concentration in oxygen doped In_0.53Ga_0.47As. Low temperature photoluminescence emission measurements at 12K on the same set of samples revealed the quenching of the near-band edge peak, and the appearance of new oxygen-induced emission features. DEALO doping in InP has also led to the incorporation of Al and O, and the compensation of Si donors due to oxygen-induced multiple deep levels.     

An X-ray photoelectron spectroscopic investigation into the chemical structure of deposits formed from hexamethyldisiloxane/ oxygen plasmas

The effect of oxygen addition to microwave-sustained plasmas of hexamethyldisiloxane (HMDSO) has been investigated. Attention was directed to the solid products formed on aluminium substrates (plasma deposits). To enable a quantitative analysis of these, X-ray photoelectron spectroscopy (XPS) of standard silicon-containing materials was carried out. When suitable charge correction is applied to the XP spectra of HMDSO/O₂ plasma deposits, a number of very clear trends emerge. From changes in elemental composition, core line binding energies (Si2p, C 1s, and O 1s) and widths, we show how oxygen addition to the plasma affects the chemical nature of the plasma deposit. The data reported also provide (some limited) information on the reactions taking place in the plasma.     

Physicochemical characteristics and leachability of scale and sludge from Bulalo geothermal system, Philippines

Scale and sludge from Bulalo geothermal field, Philippines, have been characterized by whole rock analysis, radioactivity counting, size analysis, light microscopy, scanning electron microscopy, and X-ray diffraction. Their leachability was assessed by regulatory leaching procedures and by sequential extraction. Both scale and sludge consisted mostly of oxides of Si, Al, and Fe with no radionuclides detected. The scale had 10% S content. Sulfides and silicates were important phases in both samples having size ranges from submicron to 2 mm. Geothermal soils at Bulalo have higher than normal soil levels of As, S, Cu, Cr, Zn, and Pb but regulatory leaching tests indicated that these elements are not released. However, the sequential extraction showed that As, Cu, and Zn were leachable under extreme conditions.     

International collaboration: Will it be keeping alive East European research?

International scientific collaboration is very sensitive to political and economic changes in a country or a geopolitical region. Collaboration in research is reflected by the corresponding coauthorship of the published results which can be analysed with the help of bibliometric methods. Based on data from theScience Citation Index (SCI), the change of annual international coauthorship patterns ofBulgaria, Czechoslovakia, Hungary, Poland andRomania have been analysed for the periods 1981–1985 and 1984–1993, respectively. It is shown that international collaboration was not developing similarly in the countries under study. Whilst scientific communities of Hungary and Poland have already been opening in the early 80s, the international collaboration of the other East-European countries was still dominated by COMECON relations till 1989. As expected, since 1990 an increasing scientific collaboration with highly developed countries can be observed in all five countries. At the same time, scientific collaboration with the former communist countries shows a clear decline. The great share of international co-authorship links is some countries reflect various tendencies part of which are interpreted with the help of a cardiologic model.     

Nitrogen addition to iron powder by mechanical alloying

Nitrogen was alloyed into iron (a) by mechanical processing in a nitrogen gas environment, and (b) by mechanically alloying with iron-nitride powders to characterize resulting nano-structure and nitrogen distribution. Although the infused nitrogen concentration was significantly greater than the thermodynamic equilibrium solubility of iron, no nitrides formed, even for nitrogen concentrations as high as 4.1 wt.% However, a bctFe phase did form. Lattice expansion calculations indicate that the sum of the interstitial bcc-Fe and bctFe nitrogen concentrations was significantly less than the total measured nitrogen concentration. A considerable portion of the mechanically infused nitrogen was determined to be associated with nanograin boundaries.     

Stability Testing of Clinical Samples

The stability program for clinical samples as presented is based on the ICH Tripartite Guideline for Stability Testing of New Drug Substances and Products and the same principles that the program followed throughout the development of a drug product. But the Guideline and the basic principles were adapted to deal with the specific problems encountered with clinical samples. The expiration dates represent minimum shelf lives, storage conditions, and storage periods, and the minimum shelf lives correspond the duration of the clinical trials in phases I to III. Shelf lives are established on the basis of stress and accelerated tests to provide all batches with an open expiration date. They are supported and confirmed by long-term tests conducted under the storage conditions presenting climate zone II, 25°C/60% RH. The self lives determined apply to all the batches of the relevant development stage, although only the batches in the final phase of development originate from a validated manufacturing phase. For different dosages, dosage forms, and packaging materials, the number of batches and analysis is reduced by scientifically based rationalization measures such as bracketing and matrixing. The stability results obtained with clinical samples are a major factor for achieving a comprehensive assessment of the quality of a finished medicinal product. In this way it is possible to establish a link between the quality of clinical batches for phases I-III and the quality of the finished drug product.     

Dissolution Behavior of Griseofulvin Solid Dispersions Using Polyethylene Glycol, Talc, and Their Combination as Dispersion Carriers

Griseofulvin solid dispersions were prepared using polyethylene glycol 6000 (PEG), talc, and their combination as carriers by the solvent method. The dissolution of griseofulvin from these dispersions was studied. It was found that in these carriers the drug dissolution rate was a function of drug loading. The dissolution rate from dispersions prepared using PEG was similar to that from PEG/talc dispersions, especially at a low percentage of drug loading. Dispersions of PEG and PEG/talc provided dissolution rates faster than those from dispersions of talc. The incorporation of talc in PEG yielded dispersions with properties of less tackiness and ease for handling. Dissolution kinetics, based on the Hixson-Crowell equation, was used to determine the characteristics of griseofulvin particles in dispersions. Linear relationships were obtained for PEG and PEG/talc dispersions that indicated the presence of a uniformly sized monoparticulate system, whereas deviation from linearity was observed for talc dispersions. This appeared to be a multiparticulate system in which particles were present as free form and adsorbed form on the surface of talc.     

Unrestricted Hartree-Fock approximation of the extended emery model

We use an unrestricted self-consistent Hartree-Fock approach to calculate the nature of doping states in the three-band Hubbard model. It turns out that for physically relevant parameter values one hole is localized within a small spin-polarized region where five Cu spins are aligned in the same direction. The spin polarization and binding energy between these spinpolaronic states are investigated as a function of different parameters including a Holstein-type electron-phonon coupling on the Cu sites. At higher doping concentration we observe the occurrence of afmon states where the holes are localized in a ring-shaped area. Inside this ring the antiferromagnetic order parameter has inverse sign with respect to the residual antifer-romagnetically ordered plane.