Analysis of edge slots in rectangular waveguide with finitewaveguide wall thickness

A novel analysis for computing the admittance characteristics of edge slots with a salient feature in successfully considering the finite waveguide wall thickness is presented. The variational equation for the electric field in the slot region between the inner and outer waveguide walls is derived by applying the variational reaction theory and solved by the finite-element method. The division of the slot region into small elements of triangular cylinders and the basis function for each element are described in detail. In the limiting case of zero wall thickness, this finite-element analysis is reduced to a moment-method analysis using Galerkin's approach with triangular basis functions. The effects of waveguide wall thickness on the characteristics of the slot are investigated by comparing the numerical results with and without considering the wall thickness. Negligence of the wall thickness may result in a severe underestimation of the resonant length by as large as 14% for edge slots cut in typical X-band waveguides. The computed results with the finite wall thickness taken into account have been checked with the measured data published in previous literature and those obtained by a carefully devised experimental setup. Good agreement between theoretical and experimental results is obtained to demonstrate the validity of the analysis     

Melting of secondary-phase particles in Al-Mg-Si alloys

The melting of secondary-phase particles—or, more precisely, the melting of such particles together with the surrounding matrix—in two ternary Al-Mg-Si alloys has been studied. In the quasi-binary Al-Mg₂Si alloy, one melting reaction is found. In the alloy with an Si content in excess of that necessary to form Mg₂Si, three different melting reactions are observed. At upquenching temperatures above the eutectic temperature, the reaction rates are very high, and it is assumed that they are controlled by diffusion of the alloying elements in the liquid. Melting is also observed after prolonged annealing at temperatures below the eutectic temperature in these alloys, which is explained by the different diffusion rates of Mg and Si. The rate of the melting reaction is in this case assumed to be controlled by diffusion of the alloying elements in the solid α-Al phase. It is shown that calculation of the particle/matrix interface composition, which determines when melting is possible, cannot be made solely on the basis of the phase diagram, but must also include the rate of diffusion of Mg and Si. The melting temperatures observed differ somewhat from the accepted eutectic temperatures for these alloys. On prolonged annealing, the liquid droplets formed dissolve into the surrounding matrix and their chemical composition is found to change during dissolution. The resulting eutectic structure after quenching of a droplet is explained by the phase diagram and the different diffusion rates of Mg and Si as well as by the nucleation conditions of the constituents involved.     

Partial duplication of 3q and distal deletion of 11q in a stillbirth with an omphalocele containing the liver, short limbs, and intrauterine growth retardation

We describe a female stillbirth with duplication of 3q21-->qter and deletion of 11q23-->qter resulting from an unbalanced segregation of a maternal t(3;11) reciprocal translocation. The proband had some of the clinical features consistent with those seen in patients with dup(3q) syndrome or distal del(11q) syndrome. Prenatal sonographic examination showed short limbs, intrauterine growth retardation, and an omphalocele containing the liver.     

Selective block by glyceryl nonivamide of inwardly rectifying K+ current in rat anterior pituitary GH3 cells

The effects of glyceryl nonivamide (GLNVA) on ionic currents were compared and examined in rat pituitary GH3 cells. Hyperpolarization-activated K+ currents in GH3 cells bathed in high-K+ Ca2+-free external solution were studied to assess effects of GLNVA on the an inwardly rectifying K+ current (I(K(IR))). GLNVA is very potent in blocking I(K(IR)) in a concentration-dependent manner, with a half maximal concentrations of 0.1 microM. The complete block of I(K(IR)) achieved with concentrations > or = 1 microM revealed the presence of a non-inactivating current. We also found that GLNVA at a concentration above 30 microM inhibited L-type voltage-dependent Ca2+ current and two components of K+ outward currents, while GLNVA (< or = 3 microM) did not have any effect on them. This study shows that GLNVA, in addition to retaining the capability of eliciting peptidergic neurons, is a selective block of I(K(IR)) in GH3 cells and will provide a useful tool for characterizing I(K(IR)) and understanding its physiological function. In addition, the carefulness should be taken about the interpretation of GLNVA-mediated responses in vivo or in vitro.     

Low-voltage low-power fully-integratable automatic gain controls

This paper discusses the design of low-voltage low-power fully-integratable automatic gain controls. Four different AGCs are presented, all consisting of three elementary building blocks: a controlled amplifier, a comparator and a voltage follower. Their design is treated separately. As an example, the final section describes an automatic gain control for hearing instruments, realized in a bipolar process.     

Sensory Pollution and Microbial Contamination of Ventilation Filters

Abstract The sensory pollution load and microbial contamination of glass-fibre filters at high and low relative humidity were investigated in an experimental set-up in the laboratory. Dust and particles from the outdoor air were collected in two EU7 glass-fibre filters for a pre-conditioning period of 16–18 weeks during which there was a constant airflow with a velocity of 1.9 m/s through the filters. One of the filters was exposed to outdoor air of approximately 40% relative humidity and 10°C, the other to outdoor air of approximately 80% relative humidity and 5°C. The dust in ventilation filters can constitute a serious pollution source in the indoor environment, causing deterioration in the quality of the supply air even before it enters the ventilated spaces. The sensory pollution load from the used filters after the continuous operating time of 16–18 weeks was significantly higher than the sensory pollution load from new filters but the sensory load at 40% and 80% relative humidity did not differ. The microbial contamination of the supply air downstream of the filters, which on average had been exposed to outdoor air of 40% and 80% relative humidity, was negligible.     

Low-power architectural synthesis and the impact of exploiting locality

Recently there has been increased interest in the development of high-level architectural synthesis tools targeting power optimization. In this paper, we first present an overview of the various architecture synthesis tasks and analyze their influence on power consumption. A survey of previously proposed techniques is given, and areas of opportunity are identified. We next propose a new architecture synthesis technique for low-power implementation of real-time applications. The technique uses algorithm partitioning to preserve locality in the assignment of operations to hardware units. Preserving locality results in more compact layouts, reduced usage of long high-capacitance buses, and reduced power consumption in multiplexors and buffers. Experimental results show reductions in bus and multiplexor power of up to 80% and 60%, respectively, resulting in 10–25% reduction in total power.     

Parallel allocation of attention prior to the execution of saccade sequences.

In a series of 5 experiments, the allocation of attention prior to the execution of saccade sequences was examined by using a dual-task paradigm. In the primary task, participants were required to execute a sequence of 2 endogenous saccades. The secondary task was a forced-choice letter identification task. During the programming of the saccade sequences, letters were briefly presented at the saccade goals and at no-saccade locations. The results showed that performance was better for letters presented at any of the saccade goals than for letters presented at any of the no-saccade locations. The results support a spatial model that assumes that prior to the execution of a saccade sequence, attention is allocated in parallel to all saccade goals. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A syntactic commutativity format for SOS

Considering operators defined using Structural Operational Semantics (SOS), commutativity axioms are intuitive properties that hold for many of them. Proving this intuition is usually a laborious task, requiring several pages of boring and standard proof. To save this effort, we propose a syntactic SOS format which guarantees commutativity for a set of composition operators.     

Proton conductivity in perovskite type yttrium doped barium hafnate

Yttria doped Ba-hafnates were prepared by solid state route and the proton conductivity of pressed samples of yttria doped barium hafnate was determined with impedance spectroscopy. The results are compared with existing data for cerates and zirconates. It was found that Ba-hafnates show a level of proton conduction that is comparable to that of doped Ba-zirconates at low and slightly higher at high temperatures. This is in agreement with the prediction based on the ionic radius of the tetravalent atom in the perovskite.