Galanin Receptors (GalR1, GalR2, and GalR3) Expression in Colorectal Cancer Tissue and Correlations to the Overall Survival and Poor Prognosis of CRC Patients

Colorectal cancer (CRC) is the second most common cause of cancer in women and the third in men. The postoperative pathomorphological evaluation of patients with CRC is extremely important for future therapeutic decisions. Although our previous studies demonstrated high galanin (GAL) presence within tumor tissue and an elevated concentration of GAL in the serum of CRC patients, to date, there is a lack of data regarding GAL receptor (GalR) protein expression in CRC cells. Therefore, the aim of this study was to evaluate the presence of all three types of GalRs (GalR1, GalR2 and GalR3) within epithelial cells of the human colon and CRC tissue with the use of the immunohistochemical method and to correlate the results with the clinical-pathological data. We found stronger immunoreactivity of GalR1 and GalR3 in CRC cells compared to epithelial cells of the unchanged mucosa of the large intestine. No differences in the GalR2 protein immunoreactivity between the studied tissues were noted. We also found that the increased immunoexpression of the GalR3 in CRC tissue correlated with the better prognosis and longer survival (p < 0.0079) of CRC patients (n = 55). The obtained results suggest that GalR3 may play the role of a prognostic factor for CRC patients. Based on data from the TCGA-COAD project deposited in the GDC Data Portal, we also found that GalR mRNA in cancer samples and the adjacent normal tissue did not correlate with immunoexpression of the GalR proteins in CRC cells and epithelial cells of the unchanged mucosa.     

Synthesis and Surface Active Properties of Novel Carbohydrate-based Cationic Surfactants

The synthesis of new cationic carbohydrate surfactants is presented in this paper. The obtained surfactants have structures that are typical for saponins, which contain fatty amide hydrophobic chains and hydrophilic heads with cationic carbohydrate units. Their surface active properties and biodegradability have been studied. For two types, the biodegradability was above 85% and comparable to standard carbohydrate surfactants.     

Experimental investigation of the effect of fuel nozzle geometry on the stability of a swirling non-premixed methane flame

An experimental investigation on the stability of a swirling non-premixed methane flame is reported in this paper. Methane gas is supplied through a central nozzle, and combustion (co-flow) air is supplied through an annulus surrounding the nozzle. Two main parameters were varied independently, which are the nozzle geometry and swirl strength; however the exit velocity of the central (fuel nozzle) jet and co-airflow were also varied to provide a wide range of test conditions. Two nozzles were tested: a contracted circular (referred to hereafter as CCN) and a rectangular (referred to hereafter as RN), which have similar equivalent diameter, D_e (defined as the diameter of a round slot having the same exit area as the nozzle geometry). The contracted circular nozzle has a diameter of 4.82 mm, and the rectangular nozzle has a diameter of 4.71 with an aspect ratio of 2:1. The swirl strength of the co-flow was varied by changing the vanes’ angle. The main results obtained from this study show that the rectangular nozzle exhibits higher entrainment and jet spreading rates compared with its CCN counterpart. In addition, the results revealed that increasing the swirl strength creates a flow recirculation zone which is larger with the RN compared with that of the corresponding CCN. These flow features associated with the RN lead to an enhanced mixing which consequently promotes better flame stability compared with its CCN counterpart.     

Application of the SIMS Method in Studies of Cr Segregation in Cr-Doped CoO: I, Aspects of Quantitative Analysis

Aspects of calibration of intensities of SIMS secondary ions vs concentration as well as sputtering time vs depth are considered for Cr-doped CoO. Advantages and limitations of the SIMS method in quantitative analysis of segregation-induced concentration profiles in oxide crystals are discussed. The studies indicate a substantial effect due to charging the surface during sputtering. The depth calibration was performed by using the Ta₂O₅/Ta system as a standard. Good depth resolution was revealed. The calibration dependence of Cr intensities on concentration is characterized by a wide scatter of data caused by charging the surface. Very good shape reproducibility of the intensity ratio vs depth profiles was revealed. Therefore, normalized intensity ratios can be used for calibration.     

Genetic Variability in DNA Repair Proteins in Age-Related Macular Degeneration

The pathogenesis of age-related macular degeneration (AMD) is complex and involves interactions between environmental and genetic factors, with oxidative stress playing an important role inducing damage in biomolecules, including DNA. Therefore, genetic variability in the components of DNA repair systems may influence the ability of the cell to cope with oxidative stress and in this way contribute to the pathogenesis of AMD. However, few reports have been published on this subject so far. We demonstrated that the c.977C>G polymorphism (rs1052133) in the hOGG1 gene and the c.972G>C polymorphism (rs3219489) in the MUTYH gene, the products of which play important roles in the repair of oxidatively damaged DNA, might be associated with the risk of AMD. Oxidative stress may promote misincorporation of uracil into DNA, where it is targeted by several DNA glycosylases. We observed that the g.4235T>C (rs2337395) and c.–32A>G (rs3087404) polymorphisms in two genes encoding such glycosylases, UNG and SMUG1, respectively, could be associated with the occurrence of AMD. Polymorphisms in some other DNA repair genes, including XPD (ERCC2), XRCC1 and ERCC6 (CSB) have also been reported to be associated with AMD. These data confirm the importance of the cellular reaction to DNA damage, and this may be influenced by variability in DNA repair genes, in AMD pathogenesis.     

Relaxation processes and intermolecular interactions in PVME hydrogels in sub-zero temperatures: Glass transition and pre-melting of ice

The phase transition observed by various methods in poly(vinyl methyl ether)/water systems at around 18 °C has been assigned by some investigators to the pre-melting of water and by others to a glass transition of the polymer. In this study, broadband dielectric spectroscopy and temperature modulated differential scanning calorimetry were used to identify this transition in radiationally crosslinked poly(vinyl methyl ether) hydrogels, as well as to analyse sub-zero relaxation processes in such a three-phase (polymer/ice/liquid water) system. The process at 18 °C was related to the pre-melting of water induced by the segmental motions of the polymer; however, it was seen to be one transition due to the cooperative motions of both compounds. The atypical (two regimes) temperature dependence of the segmental motion process was observed and was related to confinement of the polymer chains between ice clusters below approximately ?24 °C; furthermore, the main dielectric process of hexagonal ice was identified and a Maxwell-Wagner effect was observed.     

Studies on curing urethane prepolymers with aniline–formaldehyde resins

Commercial aniline–cresol–formaldehyde resin, two model aniline–formaldehyde and aniline–cresol–formaldehyde resins, and methylenedianiline have been used as curatives for NCO-terminated urethane prepolymer prepared from polyoxypropylenediol and toluene-diisocyanate. Based on viscoelastic behavior of the investigated systems and changes in their IR spectra, it has been concluded that phenolic OH groups present in aniline–cresol–formaldehyde resin do not play an important role in the curing process carried out at RT despite earlier suggestions to the contrary. The explanation for specific behavior of systems where urethane prepolymers have been cured with commercial aniline–cresol–formaldehyde resin is presumably the presence of small amount of solvent (benzyl alcohol) in that resin, which may influence the reaction kinetics.     

Exergy Identification Of Energy Utilization Efficiency In an Industrial Process of Ozone Generation

The main objective of the paper is to establish an arrangement of sources of exergy losses (internal and external ones) and to estimate the value of the losses in an industrial ozone production installation. An exergetic model of industrial installation in a system approach corresponding to real conditions has been formulated.     

Rheological characteristics of oligomeric semiproducts gained via chemical degradation of polyurethane foam using crude glycerin in the presence of different catalysts

Polyurethane (PU) recycling is a topic of growing interest due to the increasing amount of polyurethane waste. The main purpose of polyurethane chemical recycling is to recover the starting polyol. In this study, a method of polyurethane thermochemical recycling, glycerolysis by means of crude glycerin, is proposed. This work presents a comparative study of commercial catalysts used in order to accelerate the decomposition process, namely triethylamine (TEA), potassium acetate (KAc), 1,4‐diazabicyclo[2.2.2]octane (DABCO), sodium hydroxide (NaOH), dibutyltin dilaurate (DbDl), and stannous octoate (StOc).The effect of used catalyst on the chemical structure and rheological properties was studied. The type of catalyst does not have significant influence on the chemical structure, but causes different course of reaction: split‐ and single‐phase in applied conditions. Glycerolysates were measured by Brookfield Rheometer. It was found that repolyols can be described by the Herschel–Bulkely mathematical model in the best accuracy. The investigation showed that the rheological behavior of glycerolysates depended on the catalyst used in glycerolysis process. POLYM. ENG. SCI., 57:891–900, 2017. © 2016 Society of Plastics Engineers