Interfacial Phenomena in Al/Al,Al/Cu,and Cu/Cu Joints Soldered Using an Al-Zn Alloy with Ag or Cu Additions

The studies of soldered joints were carried out in systems: Al/solder/Al, Al/solder/Cu, Cu/solder/Cu, where the solder was (Al-Zn)_EUT, (Al-Zn)_EUT with 0.5, 1.0, and 1.5 at.% of Ag and (Al-Zn)_EUT with 0.5, 1.0, and 1.5 at.% of Cu addition. Brazing was performed at 500 °C for 3 min. The EDS analysis indicated that the composition of the layers starting from the Cu pad was CuZn, Cu5Zn8, and CuZn4, respectively. Wetting tests were performed at 500 °C for 3, 8, 15, and 30 min, respectively. Thickness of the layers and their kinetics of growth were measured based on the SEM micrographs. The formation of interlayers was not observed from the side of Al pads. On the contrary, dissolution of the Al substrate and migration of Al-rich particles into the bulk of the solder were observed.     

Parameter estimation of the electrothermal model of the ferromagnetic core

The paper presents a new form of the electrothermal model of the ferromagnetic core for SPICE and the way, in which the parameters of the model are determined. The manner of determining magnetic, geometric and thermal parameters of this model is described. The correctness of the proposed model and the manner of determining the values of the parameters are verified by comparing the calculated and measured characteristics of the selected ferromagnetic cores.     

Thermal Expansion,Electrical Resistivity,and Spreading Area of Sn-Zn-In Alloys

Thermal expansion and electrical resistivity of alloys based on Sn-Zn eutectic with 0.5, 1.0, 1.5, and 4.0 wt.% additions of In were studied. Thermal expansion measurements were performed using thermomechanical analysis tester over 223-373 K temperature range. Electrical resistivity measurements were performed with four-probe method over 298-423 K temperature range. The electrical resistivity of alloys increases linearly with temperature and concentration of In; also coefficient of thermal expansion of the studied alloys increases with In concentration. Scanning electron microscopy revealed simple eutectic microstructure with In dissolved in Sn-rich matrix. The results obtained were compared with the available literature data. Spreading tests on Cu of Sn-8.8Zn alloys with 0.5, 1.0, and 1.5 at.% of In were performed. Wetting tests were performed at 250 °C, by sessile drop method, by means of flux, and wetting times were 3, 8, 15, 30, and 60 min. In general, no clear effect of wetting time on spreading was observed.     

Effect of the structure of polymer inclusion membranes on zn(II) transport from chloride aqueous solutions

This article presents application of polymer inclusion membranes (PIM) containing polymer matrices: cellulose triacetate (CTA) or poly(vinyl) chloride (PVC), o‐nitrophenyloctyl ether (NPOE) as a plasticizer and phosphonium ionic liquids, i.e., trihexyltetradecylphosphonium chloride (Cyphos IL 101), bis(2,4,4‐trimethylpentyl)phosphinate (Cyphos IL 104) and tributyltetradecylphosphonium chloride (Cyphos IL 167), as carriers for Zn(II) transport from chloride medium. Cyphos IL167 application as an ion carrier in PIMs is reported for the first time. The membrane composition is found to affect Zn(II) transport significantly. SEM and AFM images show the differences in the surface morphology of PVC and CTA based membranes. Better transport abilities of CTA membranes (Zn(II) recovery factors exceed 80%) compared with those of PVC, indicate that the structural differences between the two polymers play a crucial role for the membrane permeability. The best initial flux and permeability coefficient are obtained for the membranes with Cyphos IL 101 and Cyphos IL 104 as carriers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42319.     

Nonlinear Absorption of Submicrometer Grain‐Size Cobalt‐Doped Magnesium Aluminate Transparent Ceramics

Transparent cobalt‐doped magnesium aluminate spinel (Co:MgAl₂O₄) ceramics with a submicrometer grain size were prepared by spark plasma sintering. For the first time, the nonlinear absorption of Co:MgAl₂O₄ transparent ceramics was experimentally demonstrated. Both ground state absorption (σ_GSA) and excited state absorption (σ_ESA) were estimated using the solid‐state slow saturable absorber model based on absorption saturation measurements performed at 1.535 μm. σ_GSA and σ_ESA for 0.03 at.% Co:MgAl₂O₄ were found to be 4.1 × 10^?19 cm² and 4.0 × 10^?20 cm², respectively. In the case of 0.06 at.% Co:MgAl₂O₄ ceramics, σ_GSA = 2.6 × 10^?19 cm² and σ_ESA= 5.3 × 10^?20 cm² were determined.     

A GENERALIZED BLOCK BOOTSTRAP FOR SEASONAL TIME SERIES

When time‐series data contain a periodic/seasonal component, the usual block bootstrap procedures are not directly applicable. We propose a modification of the block bootstrap – the generalized seasonal block bootstrap (GSBB) – and show its asymptotic consistency without undue restrictions on the relative size of the period and block size. Notably, it is exactly such restrictions that limit the applicability of other proposals of block bootstrap methods for time series with periodicities. The finite‐sample performance of the GSBB is also illustrated by means of a small simulation experiment.     

Polymer track membranes as a trap support for reagent in fiber optic sensors

The article presents a new idea of the application of polymer track membranes (PTM) for immobilization of a reagent in fiber optic chemical sensors. PTM was made of a poly(ethylene terephthalate) foil (10 μm in thickness, pores of 0.2 μm in diameter). The usefulness of membranes additionally covered by poly(vinyl chloride) was tested in a fiber optic redox titrator. The titrator utilized N,N′-diphenylbenzidine as a reagent which changes its absorbance in dependence on the redox potential. The measuring system is based on a lightemitting diode and a silicon photodiode connected to a bifurcated fiber optic bundle. The gain is in price and availability of the membrane. © 1996 John Wiley & Sons, Inc.