Implementation Issues in Turbo Decoding for 3GPP FDD Receiver

In the Frequency Division Duplex (FDD) mode of the Third Generation Partnership Project (3GPP) standard, implementation of the turbo decoder, especially for the mobile equipments, faces design decisions related to computational complexity, power efficiency, and memory requirements. In this paper we compare different approaches of low complexity implementation of the turbo decoder, with emphasis on the issues of signal scaling and quantization, the sliding window operation for memory size reduction and the iteration stopping algorithms. The demodulated signal at the output of the RAKE receiver may have a wide dynamic range and it may require many bits of precision. In order to overcome the numerical precision problem and to prevent Log Likelihood ratio (LLR) metric overflow, a scaling algorithm must be used. Our simulation results indicate that the Average Absolute (AA) algorithm using dynamic scaling outperforms other scaling schemes and it is less sensitive to the channel conditions. One of the major challenges in the implementation of a practical turbo decoder is optimization of memory requirements. In this paper we evaluate the performance of the sliding window algorithm using different main and guard window sizes. We show that the bit and block error rate performance of the sliding window scheme mainly depend on the guard window size rather than the main window size. The simulation results indicate that small guard window sizes can significantly decrease the iteration gain for large frames in fast fading channels. Iteration stopping algorithms reduce the power consumption and the latency of the decoder and help to dedicate more resources to other functions of the receiver. The block error distribution in the fading channels makes it even more essential to use an iteration stopping rule. Our simulations conclude that a rule called the minimum absolute value appears to be a very effective, low complexity and robust algorithm. Mohamadreza Marandian Hagh was born in Tabriz, Iran on January 1974. He received the B.S. and the M.S. degrees in electrical engineering from Tehran University with honors in 1996 and 1999, respectively. He is pursuing the Ph.D. degree in electrical engineering at Northeastern University, Boston. His research interests includes information theory, channel coding and iterative techniques for wireless communication systems. His current research is focused on low complexity designs for iterative receivers using Space-Time coding in time-dispersive channels. He is also interested in Exit-Chart analysis of iterative receivers. From 1996 to 1999, he was with Sana Pro Inc. as a system engineer, developing simulation tools for OFDM, WCDMA, CDMA2000. He is currently with Airvana Inc. in Chelmsford, MA and working on 1xEVDO wireless systems. Masoud Salehi received BS degree (Summa Cum Laude) from Tehran University and MS and Ph.D. degrees from Stanford University all in Electrical Engineering. Before joining Northeastern, he was with the Departments of Electrical and Computer Engineering, Isfahan University of Technology and Tehran University. From February 1988 to May 1989 Dr. Salehi was a visiting professor at the Information Theory Research Group, Department of Electrical Engineering, Eindhoven University of Technology, The Netherlands, where he did research in network information theory and coding for storage media.In 1989 Dr. Salehi joined Department of Electrical and Computer Engineering, Northeastern University. Professor Salehi is a member of the CDSP (Communication and Digital Signal Processing) Center. His main areas of research interest are network information theory, source-channel matching problems in single and multiple user systems, data compression, turbo coding, coding for fading channels, and digital watermarking. Professor Salehi’s research has been supported by research grants from the National Science Foundation (NSF), GTE, NUWC, CenSSIS, and Analog Devices. Professor Salehi has also done consulting to the industry including Teleco Oilfield Services and AT&T. Professor Salehi is currently a member of the Editorial Board of The International Journal of Electronics and Communications.Professor Salehi is the coauthor of the textbooks “Communication Systems Engineering”, Prentice-Hall 1994, 2002, “Contemporary Communication Systems Using MATLAB and Simulink” Thomson 1998, 2000, 2004, and “Fundamentals of Communication Systems”, Prentice-Hall 2005. Abhay Sharma received B.E. (Hons) Electrical and Electronics Engineering degree from Birla Institute of Technology and Science, Pilani, India in 1996 and M.S. Electrical Engineering degree from Ohio State University, Columbus in 2000. From 2000 to 2005 he was working with Analog Devices, RF and Wireless Systems Group, Wilmington, USA, where he was working on design and implementation of algorithms for the emerging cellular communication standards. Currently he is working with Allgo Embedded Systems, Bangalore, India, in the area of wireless networks and systems based on the emerging W-PAN wireless technologies. Zoran Zvonar received the Dipl. Ing. degree in 1986 and the M.S. degree in 1989, both from the Department of Electrical Engineering, University of Belgrade, Yugoslavia, and the Ph.D. degree in Electrical Engineering from the Northeastern University, Boston, in 1993.From 1986 to 1989 he was with the Department of Electrical Engineering, University of Belgrade, Belgrade, Yugoslavia, where he conducted research in the area of telecommunications. 1993 to 1994 he was a Post-Doctoral investigator at the Woods Hole Oceanographic Institution, Woods Hole, MA, anconducted research on multiple-access communications for underwater acoustic networks. Since 1994 he has been with the Analog Devices, Communications Division, Wilmington, USA. He is the Manager of the Systems Engineering Group focusing on the design of algorithms and architectures for wireless communications, with emphasis on integrated solutions and real-time software.He was a Guest Editor of the IEEE Transactions on Vehicular Technology, the International Journal of Wireless Information Networks and the ACM/Baltzer Wireless Networks, Associate Editor of the IEEE Communications Letters and a co-editor of the books GSM: Evolution Towards Third Generation Systems, Kluwer Academic Publishers, 1998, Wireless Multimedia Networks Technologies, Kluwer Academic Publishers, 1999 and Software Radio Technologies: Selected Reading, IEEE Press, 2001. Dr. Zvonar is currently Co-Editor of the Radio Communication Series in the IEEE Communications Magazine.     

A Low-Voltage Fully Differential Pure Current Mode Current Operational Amplifier

In this paper a novel high-frequency fully differential pure current mode current operational amplifier (COA) is proposed that is, to the authors’ knowledge, the first pure MOSFET Current Mode Logic (MCML) COA in the world, so far. Doing fully current mode signal processing and avoiding high impedance nodes in the signal path grant the proposed COA such outstanding properties as high current gain, broad bandwidth, and low voltage and low-power consumption. The principle operation of the block is discussed and its outstanding properties are verified by HSPICE simulations using TSMC \(0.18\,\upmu \hbox {m}\) CMOS technology parameters. Pre-layout and Post-layout both plus Monte Carlo simulations are performed under supply voltages of \(\pm 0.75\,\hbox {V}\) to investigate its robust performance at the presence of fabrication non-idealities. The pre-layout plus Monte Carlo results are as; 93 dB current gain, \(8.2\,\hbox {MHz}\,\, f_{-3\,\text {dB}}, 89^{\circ }\) phase margin, 137 dB CMRR, 13 \(\Omega \) input impedance, \(89\,\hbox {M}\Omega \) output impedance and 1.37 mW consumed power. Also post-layout plus Monte Carlo simulation results (that are generally believed to be as reliable and practical as are measuring ones) are extracted that favorably show(in abovementioned order of pre-layout) 88 dB current gain, \(6.9\,\hbox {MHz} f_{-3\text {db}} , 131^{\circ }\) phase margin and 96 dB CMRR, \(22\,\Omega \) input impedance, \(33\,\hbox {M}\Omega \) output impedance and only 1.43 mW consumed power. These results altogether prove both excellent quality and well resistance of the proposed COA against technology and fabrication non-idealities.     

Design of Novel Ultra-Wideband Bandpass Filter with High Selectivity and Wide Stop Band and Optimizing it with Neuro-Genetic Method

This paper develops a novel ultra-wideband bandpass filter with high selectivity, deep stop band and compact size. By linking a broadband bandstop filter at two sides with two feed lines via interdigital coupled lines with enhanced coupling degree, an initial ultra-wideband bandpass filter is created. In this filter, all undesired pass bands are rejected by broadband bandstop filter embedded in middle of ultra-wideband filter. Then, stepped impedance open stubs are used for realizing transmission zeros in pass band edges to increase selectivity. Finally, a neuro-genetic method is applied for optimizing of proposed ultra-wideband bandpass filter. For this task, first a nonlinear relation is established between the input (layout parameters) and output (electrical responses) data by using neural network. Then, genetic algorithm is used in conjunction with neural network model for optimizing the ultra-wideband bandpass filter parameters. The designed filter was fabricated and measured that showed good characteristics including deep stop band and very high pass band selectivity.     

Improved impossible differential and biclique cryptanalysis of HIGHT

HIGHT is a lightweight block cipher introduced in CHES 2006 by Hong et al as a block cipher suitable for low‐resource applications. In this paper, we propose improved impossible differential and biclique attacks on HIGHT block cipher both exploiting the permutation‐based property of the cipher's key schedule algorithm as well as its low diffusion. For impossible differential attack, we found a new 17‐round impossible differential characteristic that enables us to propose a new 27‐round impossible differential attack. The total time complexity of the attack is 2^120.4 where an amount of 2^59.3 chosen plaintext‐ciphertext pairs and 2^107.4 memory are required. We also instantiate a new biclique cryptanalysis of HIGHT, which is based on the new idea of splitting each of the forward and backward keys into 2 parts where the computations associated to each one are performed independently. The time complexity and data complexity of this attack are 2^125.7 and 2⁴², respectively. To the best of our knowledge, this is the fastest biclique attack on full‐round HIGHT.     

Anti‐Oxygen Leaking LiCoO2

LiCoO₂ is a prime example of widely used cathodes that suffer from the structural/thermal instability issues that lead to the release of their lattice oxygen under nonequilibrium conditions and safety concerns in Li‐ion batteries. Here, it is shown that an atomically thin layer of reduced graphene oxide can suppress oxygen release from Li_xCoO₂ particles and improve their structural stability. Electrochemical cycling, differential electrochemical mass spectroscopy, differential scanning calorimetry, and in situ heating transmission electron microscopy are performed to characterize the effectiveness of the graphene‐coating on the abusive tolerance of Li_xCoO₂. Electrochemical cycling mass spectroscopy results suggest that oxygen release is hindered at high cutoff voltage cycling when the cathode is coated with reduced graphene oxide. Thermal analysis, in situ heating transmission electron microscopy, and electron energy loss spectroscopy results show that the reduction of Co species from the graphene‐coated samples is delayed when compared with bare cathodes. Finally, density functional theory and ab initio molecular dynamics calculations show that the rGO layers could suppress O₂ formation more effectively due to the strong C? O_cathode bond formation at the interface of rGO/LCO where low coordination oxygens exist. This investigation uncovers a reliable approach for hindering the oxygen release reaction and improving the thermal stability of battery cathodes.     

Analog to digital converter for high density neural signal recording front-end in 90 nm

High-fidelity recording of neural signals requires varying levels of signal gain to capture low-amplitude single-unit activity in the presence of high-amplitude population activity. A floating-point approach has been used to widen the dynamic range of analog-to-digital converters (ADC) designed for this application. In this paper we present an ADC, designed for multi-channel, portable neural signal recording systems. To achieve low power consumption, small die area and wide dynamic range, an ADC based on a time-based algorithm, combined with a floating-point pipelined structure has been designed and simulated. A conventional variable-gain amplifier (VGA) stage has been eliminated in favor of a reference-current in a time-based ADC architecture. The 12-b pipelined time-based floating-point ADC has been designed with a 7-b mantissa and an exponent that provides an additional 5 bits of dynamic range. The mantissa is determined by a uniform 7-b pipelined time-based analog to digital converter. The ADC chip was designed and simulated in a 90 nm CMOS process, which occupies an active area of 360 μm × 550 μm, and consumes 7.8 μW at 1.2 V in full-scale conversion.     

Optimum alternatives of tandem G/G/K queues with disaster customers and retrial phenomenon: interactive voice response systems

In this paper, we study a tandem queue with retrials where the queue experiences disasters. The probability of system failure depends on the strength of equipment, which makes servers idle and causes the removal of all customers in queues and service areas at once. The customers in the queue are forced to orbit in a retrial queue during the system failure where they decide whether or not to come back to the system. Reducing the disaster arrival rate (the probability of system failure) by employing more servers and reducing the number of lost customers is very costly. Moreover, it is important to service the customers with no interruption and reduce the time in system. The developed scenarios are compared in five dimensions including time in system, cost of lost customer, operator cost, the number of uninterrupted service customers and cost of reducing disaster arrival rate (or empowering system cost). The scenarios are modeled by computer simulation. Then, the optimal scenario is chosen using data envelopment analysis. The optimal scenario maximizes system efficiency in terms of disaster arrival rate, cost of lost customers and the number of satisfied customers. In the main problem, the disasters arrive at the system according to Poisson process; the effect of changing the distribution function of disaster arrival has been investigated finally. We are among the first ones to study and optimize G/G/K tandem queuing systems with system failures and retrial phenomena in interactive voice response systems.     

Highly Conductive Carbon Nanotube‐Graphene Hybrid Yarn

An efficient procedure for the fabrication of highly conductive carbon nanotube/graphene hybrid yarns has been developed. To start, arrays of vertically aligned multi‐walled carbon nanotubes (MWNT) are converted into indefinitely long MWNT sheets by drawing. Graphene flakes are then deposited onto the MWNT sheets by electrospinning to form a composite structure that is transformed into yarn filaments by twisting. The process is scalable for yarn fabrication on an industrial scale. Prepared materials are characterized by electron microscopy, electrical, mechanical, and electrochemical measurements. It is found that the electrical conductivity of the composite MWNT‐graphene yarns is over 900 S/cm. This value is 400% and 1250% higher than electrical conductivity of pristine MWNT yarns or graphene paper, respectively. The increase in conductivity is asssociated with the increase of the density of states near the Fermi level by a factor of 100 and a decrease in the hopping distance by an order of magnitude induced by grapene flakes. It is found also that the MWNT‐graphene yarn has a strong electrochemical response with specific capacitance in excess of 111 Fg^?1. This value is 425% higher than the capacitance of pristine MWNT yarn. Such substantial improvements of key properties of the hybrid material can be associated with the synergy of MWNT and graphene layers in the yarn structure. Prepared hybrid yarns can benefit such applications as high‐performance supercapacitors, batteries, high current capable cables, and artificial muscles.     

Thermal,mechanical, and corrosion resistance properties of vinyl ester/clay nanocomposites for the matrix of carbon fiber‐reinforced composites exposed to electron beam

Vinyl ester/clay nanocomposites with 1, 3, and 5% nanoclay contents were prepared. X‐ray diffractography patterns and Scanning Electron micrographs showed that nanocomposites with the exfoliated structure were formed. Thermogravimetric analysis, water absorption test, and Tafel polarization method, respectively, revealed the improvements in thermal resistance, water barrier properties, and corrosion resistance properties of the samples with an increase in the amount of the incorporated nanoclay. Tensile tests showed that nanoclay also enhanced the mechanical properties of the polymer, so that the tensile strength of the samples with 5% nanoclay was more than 3 times higher than tensile strength of pure vinyl ester samples. Overall, the best properties were observed for the samples containing 5% nanoclay. Pure vinyl ester and nanocomposite with 5% nanoclay content were exposed to the electron beam radiation and their mechanical properties improved up to 500 kGy irradiation dose. Finally, pure vinyl ester and vinyl ester/nanoclay (5%) matrixes were reinforced with carbon fiber and the effect of electron beam irradiation on their mechanical properties was examined. The tensile strength and the modulus of the samples initially increased after exposure to the radiation doses up to 500 kGy and then a decrease was observed as the irradiation dose rose to 1000 kGy. Moreover, nanoclay moderated the effect of the irradiation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42393.     

Effect of Double Austenitization on the Microstructure and Hardness of High-Carbon Steel 1.4% C – 11.7% Cr

Metal Science and Heat Treatment - The effects of single and double austenitization at 900, 590, 1000 and 1050°C on the microstructure and hardness of quenched and tempered steel 1.4% C...