Intestinal obstruction and peritoneal carcinomatosis after endoscopic resection of transitional carcinoma of urinary bladder

Gut involvement in bladder tumours is low, even exceptional in the presence of surface, low-grade neoplasia. The authors explain their experience in the diagnosis and management of a patient treated endoscopically for a vesical surface tumour which subsequently exhibited peritoneal and gut metastatic seeding. The various mechanisms for gut dissemination of vesical neoplasias and the repercussion of their endoscopic management are discussed.     

Molecular basis of resistance to HIV-1 protease inhibition: a plausible hypothesis

The binding thermodynamics of the HIV-1 protease inhibitor acetyl pepstatin and the substrate Val-Ser-Gln-Asn-Tyr-Pro-Ile-Val-Gln, corresponding to one of the cleavage sites in the gag, gag-pol polyproteins, have been measured by direct microcalorimetric analysis. The results indicate that the binding of the peptide substrate or peptide inhibitor is entropically driven; i.e., it is characterized by an unfavorable enthalpy and a favorable entropy change, in agreement with a structure-based thermodynamic analysis based upon an empirical parameterization of the energetics. Dissection of the binding enthalpy indicates that the intrinsic interactions are favorable and that the unfavorable enthalpy originates from the energy cost of rearranging the flap region in the protease molecule. In addition, the binding is coupled to a negative heat capacity change. The dominant binding force is the increase in solvent entropy that accompanies the burial of a significant hydrophobic surface. Comparison of the binding energetics obtained for the substrate with that obtained for synthetic nonpeptide inhibitors indicates that the major difference is in the magnitude of the conformational entropy change. In solution, the peptide substrate has a higher flexibility than the synthetic inhibitors and therefore suffers a higher conformational entropy loss upon binding. This higher entropy loss accounts for the lower binding affinity of the substrate. On the other hand, due to its higher flexibility, the peptide substrate is more amenable to adapt to backbone rearrangements or subtle conformational changes induced by mutations in the protease. The synthetic inhibitors are less flexible, and their capacity to adapt is more restricted. The expected result is a more pronounced effect of mutations on the binding affinity of the synthetic inhibitors. On the basis of the thermodynamic differences in the mode of binding of substrate and synthetic inhibitors, it appears that a key factor to understanding resistance is given by the relative balance of the different forces that contribute to the binding free energy and, in particular, the balance between conformational and solvation entropy.     

Maintenance strategy based on a multicriterion classification of equipments

In an industrial plant, the level of maintenance provided to individual equipment is directly related to the availability that is expected from it. Thus, it is hoped that the most critical equipments will not fail or, at least, that any failure will be rapidly detected and corrected in the minimum time possible. Since resources are limited, it is necessary to determine how they should be distributed, so that no important equipment remains neglected while more resources are concentrated on the most critical items. Therefore, it is necessary to classify equipment in an objective way according to its importance. The method of multicriterion classification of critical equipments (MCCE)², which is described in the present work, allows systematic and detailed quantification of the criticality of all equipment, that is to say, it provides an evaluation of the importance that its correct operation has for the plant. To provide this information, the consequences for a company of any failure in the equipment concerned are analysed. Finally, a real case example of an urban wastewater treatment plant is described, in which the MCCE method is applied.     

Modelling thermal degradation of composite materials

A one–dimensional, transient thermal degradation heat transfer model for the response of composite materials when exposed to fire is presented. The model can handle layers of different materials. Material properties are functions of temperature. The reaction can be specified using Arrhenius‐type parameters or by inputting a density–temperature relationship determined by any experimental technique such as thermogravimetric analysis. The model is validated against the experimental data presented in Boyer's 1984 dissertation. Overall, the model provides excellent agreement with the experimental data. It is shown that very little difference is found between results arrived at by Arrhenius kinetics and results obtained by specifying the easier to measure density–temperature relationship. From this it is concluded that this technique is a viable alternative to Arrhenius‐type models. Copyright © 2006 John Wiley & Sons, Ltd.     

The Role of Network Topologies in the Optical Core of IP-over-WDM Networks with Static Wavelength Routing

In this paper, we present a performance analysis of network topologies for the optical core of IP-over-WDM networks with static wavelength routing. The performance analysis is focused on regular degree four topologies, and, for comparison purposes, degree three topologies are also considered. It is shown that the increase of the nodal degree from three (degree three topology with smallest diameter) to four (degree four topology with smallest diameter) improves the network performance if a larger number of wavelengths per link is available. However, the influence of wavelength interchange on the nodal degree gain is small. The performance of regular degree four topologies with smallest diameter is also compared with the performance of mesh–torus topologies (which are also degree four topologies), and it is shown that the blocking probability of degree four topologies with smallest diameter is about two orders of magnitude lower than the blocking probability of mesh–torus topologies. It is also presented a performance comparison of WDM-based networks with nodal degrees ranging from two to five and it is shown that the increase of the nodal degree from two to three leads to high nodal degree gains, while de increase of the nodal degree from four to five leads to low nodal degree gains. These results show that degree three and degree four topologies are very attractive for use in the optical core of IP-over-WDM networks.     

A scale model for fitting object shapes from fixed location data

In this paper we present a scale model for fitting an ideal shape to an object. The measurements of the object are taken corresponding to a fixed coordinate system at a set of well-defined locations on the surface of the object. We propose an algorithm to estimate the model parameters and hypothesis tests to make statistical inferences about several possible special cases of the general model. The model is tested with an example that analyzes data on the feet of people in Hong Kong.     

Finite element analysis of partly wrinkled reinforced prestressed membranes

Wrinkling is a well known phenomenon experimented by tension membranes in Civil Engineering applications. This paper will present an efficient numerical technique for the computational simulation of such wrinkles in a prestressed membrane. In particular, the relaxed energy approach (Pipkin in IMA J Appl Math 36:85–99, 1986) is particularized for prestressed membranes (Gil in Textile composites and inflatable structures, CIMNE, 2003) undergoing moderate strains. Wrinkling conditions in terms of the Euler-Lagrange finite deformation tensor along principal directions will be obtained. This will provide a framework to describe properly the initial instant when wrinkles start to be encountered in a prestressed Saint Venant–Kirchhoff hyperelastic membrane. Subsequently, a modified Helmholtz’s free energy functional will be introduced with the purpose of describing the modified constitutive behaviour of the continuum after the onset of wrinkling. Consistent derivations of the stress tensor as well as the constitutive tensor will de depicted. The results will be particularized for membranes and cables in a Finite Element discretization basis. Some numerical examples will prove the accuracy and robustness of the described algorithm.     

Silver Electrodeposition from Photographic Processing Solutions

This paper describes the parameters that are important in the industrial practice of silver removal from photographic fixers. The experiments were performed under potentiostatic control using synthetic solutions. The current efficiency was analysed as a function of the cathodic potential taking into account the deposit quality. A cathodic potential of ?0.5 V against a saturated calomel electrode is recommended. The conditions to prevent the darkening of the electrodeposit were investigated. The determination of silver concentration in the solution was made by direct potentiometry. The results obtained with synthetic fixers were corroborated by making the silver deposition from commercial fixers in an electrochemical reactor with rotating cylinder electrode intercalated in an electrolytic flow circuit in order to simulate practical conditions.     

Identification of thermoresistive solar radiation sensors

An identification procedure to estimate the parameters of a thermoresistive solar radiation sensor is presented. The proposed technique employs only electrical excitation for the sensor. The estimation algorithm is recursive and is applied to the sensor model derived from the thermodynamic equilibrium differential equations. The simulation and the experimental results demonstrate the validity of the proposed approach     

Selective oxidation of alcohols using octahedral molecular sieves: influence of synthesis method and property–activity relations

Manganese oxides having a tunnel structure (OMS-2) have been utilized as selective catalysts for alcohol oxidation. In this study manganese oxide catalysts were synthesized in different media and modified by exchanging the tunnel cation by H⁺, using acid treatment or exchanging with NH₄⁺ followed by thermolysis. Various alcohol oxidations were performed using these catalysts to ascertain the influence of synthesis method on their activity. A correlation is made between lattice oxygen instability and activity of the catalysts, which indicates involvement of the lattice oxygen in the mechanism. The exchange of the tunnel cation with the smaller H⁺ ions leads to weakening of the Mn–O bond, as verified by temperature programmed desorption (TPD) results. Only the chemisorbed oxygen on the surface (O⁻) and the lattice oxygen in the layers close to the surface is involved in the oxygen transfer during the reaction.