Temperature-programmed high-performance liquid chromatography coupled to isotope ratio mass spectrometry

The utility of liquid chromatography coupled to the isotope ratio mass spectrometry technique (LC-IRMS) has already been established through a variety of successful applications. However, the analytical constraint related to the use of aqueous mobile phases limits the LC separation mechanism. We report here a new strategy for high-precision (13)C isotopic analyses based on temperature-programmed LC-IRMS using aqueous mobile phases. Under these conditions, the isotopic precision and accuracy were studied. On one hand, experiments were carried out with phenolic acids using isothermal LC conditions at high temperature (170 degrees C); on the other hand, several experiments were performed by ramping the temperature, as conventionally used in a gas chromatography-based method with hydrosoluble fatty acids and pulses of CO 2 reference gas. In isothermal conditions at 170 degrees C, despite the increase of the CO 2 background, p-coumaric acid and its glucuronide conjugate gave reliable isotopic ratios compared to flow injection analysis-isotopic ratio mass spectrometry (FIA-IRMS) analyses (isotopic precision and accuracy are lower than 0.3 per thousand). On the opposite, for its sulfate conjugate, the isotopic accuracy is affected by its coelution with p-coumaric acid. Not surprisingly, this study also demonstrates that at high temperature (170 degrees C), a compound eluting with long residence time (i.e., ferulic acid) is degraded, affecting thus the delta (13)C (drift of 3 per thousand) and the peak area (compared to FIA-IRMS analysis at room temperature). Quantitation is also reported in isothermal conditions for p-coumaric acid in the range of 10-400 ng/mL and with benzoic acid as an internal standard. For temperature gradient LC-IRMS, in the area of the LC gradient (set up at 20 degrees C/min), the drift of the background observed produces a nonlinearity of SD (delta (13)C) approximately 0.01 per thousand/mV. To circumvent this drift, which impacts severely the precision and accuracy, an alternative approach, i.e., eluting the compound on the plateau of temperature studied was reported here. Other experiments with temperature-programmed LC-IRMS experiments are also reported with the presence of methanol in the injected solution to mimic residual solvent originating from the sample preparation or to slightly increase the solubility of the targeted compound for high-precision measurement.     

Topography of brain sodium accumulation in progressive multiple sclerosis

Object

Sodium accumulation is involved in neuronal injury occurring in multiple sclerosis (MS). We aimed to assess sodium accumulation in progressive MS, known to suffer from severe neuronal injury.

Materials and methods

3D-²³Na-MRI was obtained on a 3T-MR-scanner in 20 progressive MS patients [11 primary-progressive (PPMS) and nine secondary-progressive (SPMS)] and 15 controls. Total sodium concentrations (TSC) within grey matter (GM), normal-appearing white matter (WM) and lesions were extracted. Statistical mapping analyses of TSC abnormalities were also performed.

Results

Progressive MS patients presented higher GM–TSC values (48.8 ± 3.1 mmol/l wet tissue vol, p < 0.001) and T₂lesions-TSC values (50.9 ± 2.2 mmol/l wet tissue vol, p = 0.01) compared to GM and WM of controls. Statistical mapping analysis showed TSC increases in PPMS patients confined to motor and somatosensory cortices, prefrontal cortices, pons and cerebellum. In SPMS, TSC increases were associated with areas involving: primary motor, premotor and somatosensory cortices; prefrontal, cingulate and visual cortices; the corpus callosum, thalami, brainstem and cerebellum. Anterior prefrontal and premotor cortices TSC were correlated with disability.

Conclusion

Sodium accumulation is present in progressive MS patients, more restricted to the motor system in PPMS and more widespread in SPMS. Local brain sodium accumulation appears as a promising marker to monitor patients with progressive MS.     

Non-premixed fluidized bed combustion of C1-C4n-alkanes

The non-premixed combustion of C₁-C₄n-alkanes with air was investigated inside a bubbling fluidized bed of inert sand particles at intermediate temperatures: 923 K ? T_B ? 1123 K. For ethane, propane and n-butane, combustion occurred mainly in the freeboard region at bed temperatures below T₁ = 923 K. On the other hand, complete conversion occurred within 0.2 m of the injector at: T₂ = 1073 K. For methane, the measured values of T₁ and T₂ were significantly higher at 1023 K and above 1123 K, respectively. The fluidized bed combustion was accurately modeled with first-order global kinetics and one PFR model to represent the main fluidized bed body. The measured global reaction rates for C₂-C₄n-alkanes were characterized by a uniform Arrhenius expression, while the global reaction rate for methane was significantly slower. Reactions in the injector region either led to significant conversion in that zone or an autoignition delay inside the main fluidized bed body. The conversion in the injector region increased with rising fluidized bed temperature and decreased with increasing jet velocity. To account for the promoting and inhibiting effects, an analogy was made with the concept of induction time: the PFR length (b_i) of the injector region was correlated to the fluidized bed temperature and jet velocity using an Arrhenius expression. These results show that the conversion of C₂-C₄n-alkanes can be estimated with one set of critical bed temperatures and modeled with one Arrhenius kinetics expression.     

In situ synchrotron X-ray micro-tomography study of pitting corrosion in stainless steel

Pitting corrosion of stainless steel has been investigated with high-resolution in situ X-ray microtomography. The growth of pits at the tip of stainless steel pins has been observed with 3D microtomography under different conditions of applied current and cell potential. The results demonstrate how pits evolve in stainless steel, forming a characteristic “lacy” cover of perforated metal. In addition, it is shown how the shape of pits becomes modified by MnS inclusions.     

An innovative experimental study of corner radius effect on cutting forces

The cutting forces are often modelled using edge discretisation methodology. In finish turning, due to the smaller corner radii, the use of a local cutting force model identified from orthogonal cutting tests poses a significant challenge. In this paper, the local effect of the corner radius r_? on the forces is investigated using a new experimental configuration: corner cutting tests involving the tool nose. The results are compared with inverse identifications based on cylindrical turning tests and elementary cutting tests on tubes. The results obtained from these methods consistently show the significant influence of the corner radius r_? on the cutting forces.     

Use of neural networks for predictions using time series: Illustration with the El Niño Southern oscillation phenomenon

This paper introduces the use of sets of multiple networks (bundled networks) to manage the variability due to different initialization parameters. This method makes it statistically impossible for the networks to be trapped in the same local minimum, and therefore allows better control of the confidence of the prediction eventually given. The spread of the forecasts given by these different networks can be used for prediction reliability purposes. An illustration of this usage is given with the El Niño phenomenon.     

In situ injection of THF to trigger gas hydrate crystallization: Application to the evaluation of a kinetic hydrate promoter

This paper investigates an original method to efficiently trigger gas hydrate crystallization. This method consists of an in situ injection of a small amount of THF into an aqueous phase in contact with a gas-hydrate-former phase at pressure and temperature conditions inside the hydrate metastable zone. In the presence of a CO₂–CH₄ gas mixture, our results show that the THF injection induces immediate crystallization of a first hydrate containing THF. This triggers the formation of the CO₂–CH₄ binary hydrate as proven by the pressure and temperature reached at equilibrium. This experimental method, which “cancels out” the stochasticity of the hydrate crystallization, was used to evaluate the effect of the anionic surfactant SDS at different concentrations, on the formation kinetics of the CO₂–CH₄ hydrate. The results are discussed and compared with those published in a recent article (Ricaurte et al., 2013), where THF was not injected but present in the aqueous phase from the beginning and at much higher concentrations.     

Dynamic response of ferrofluidic deformable mirrors using elastomer membrane and overdrive techniques

The experimental results obtained with a ferrofluidic deformable mirror controlled by electro-magnet actuators are presented here. Using a step input through a single actuator, we obtained a steady-state settling time of 100?ms; however, different combinations of overdrive inputs can be used to decrease it to 25?ms. A new technique which consists of laying down an elastomer membrane, coated with an aluminum film, on the ferrofluid is also discussed. By adding the membrane on the ferrofluid, it further decreases the time response by a factor of 2. Furthermore, the thin aluminum layer improves the reflectivity of the mirror. Finally, using the membrane and the overdrive techniques combined, the time response is improved by a factor of 20. Numerical simulations show that ferrofluidic mirrors using membranes and improved electronics should reach settling times of the order of a millisecond. Presumably, even lower settling times could be possible.     

Chlorination of bromide-containing waters: Enhanced bromate formation in the presence of synthetic metal oxides and deposits formed in drinking water distribution systems

Bromate formation from the reaction between chlorine and bromide in homogeneous solution is a slow process. The present study investigated metal oxides enhanced bromate formation during chlorination of bromide-containing waters. Selected metal oxides enhanced the decay of hypobromous acid (HOBr), a requisite intermediate during the oxidation of bromide to bromate, via (i) disproportionation to bromate in the presence of nickel oxide (NiO) and cupric oxide (CuO), (ii) oxidation of a metal to a higher valence state in the presence of cuprous oxide (Cu₂O) and (iii) oxygen formation by NiO and CuO. Goethite (α-FeOOH) did not enhance either of these pathways. Non-charged species of metal oxides seem to be responsible for the catalytic disproportionation which shows its highest rate in the pH range near the pK_a of HOBr. Due to the ability to catalyze HOBr disproportionation, bromate was formed during chlorination of bromide-containing waters in the presence of CuO and NiO, whereas no bromate was detected in the presence of Cu₂O and α-FeOOH for analogous conditions. The inhibition ability of coexisting anions on bromate formation at pH 8.6 follows the sequence of phosphate >> sulfate > bicarbonate/carbonate. A black deposit in a water pipe harvested from a drinking water distribution system exerted significant residual oxidant decay and bromate formation during chlorination of bromide-containing waters. Energy dispersive spectroscopy (EDS) analyses showed that the black deposit contained copper (14%, atomic percentage) and nickel (1.8%, atomic percentage). Cupric oxide was further confirmed by X-ray diffraction (XRD). These results indicate that bromate formation may be of concern during chlorination of bromide-containing waters in distribution systems containing CuO and/or NiO.