Continuous generating grinding—Tooth root machining and use of CBN-tools

Profile accuracy, no burning and residual compressive stresses at the tooth root fillet are required for the durability of highly stressed gears. This paper reveals the challenges for continuous generating grinding with corundum and CBN. For this purpose, material removal simulations and experimental investigations were carried out to gain knowledge of the tool–workpiece contact conditions. The potential of CBN tools was analysed due to the fact that the mechanical loads at the grinding worm tip result in high profile wear of the corundum tools. In this context, especially the interrelationship between the dressing strategy and the workpiece quality was investigated in detail.     

Lipozyme IM‐catalyzed interesterification for the production of margarine fats in a 1 kg scale stirred tank reactor

Lipozyme IM‐catalyzed interesterification of the oil blend between palm stearin and coconut oil (75/25 w/w) was studied for the production of margarine fats in a 1 kg scale batch stirred tank reactor. Parameters such as lipase load, water content, temperature, and reaction time were investigated. The reusability of Lipozyme IM was also studied under optimized conditions. The interesterification products were monitored by analysis of triacylglycerol profiles, the contents of diacylglycerols, free fatty acids (FFA), and solid fat contents. The contents of some triacylglycerol species, which were categorized by equivalent carbon number (ECN), namely ECN34, 36, 48, and 50, decreased by 6.0, 5.9, 5.8, and 13.7%, respectively, after enzymatic interesterification, similar to the reduction of those species after chemical interesterification, 6.6, 6.0, 7.1, and 12.9%, respectively. On the other hand, those of ECN38, 40, 42, 44, and 46 increased by 1.1, 1.6, 6.8, 16.7, and 6.5%, respectively, in comparison with the increase of those species after chemical interesterification, 0.2, 1.5, 6.5, 17.0, and 9.2%, respectively. Lipase load and reaction time had great influence on the degree of interesterification. A Lipozyme IM load of 6% was required for a reaction of 6 h and at 60 °C, to reach a stable degree of interesterification. Temperature variation in the range of 50—75 °C did not affect the reaction degree as well as the contents of diacylglycerols, but the content of FFA slightly increased with higher temperature. Addition of water to the enzyme increased the contents of diacylglycerols and FFA in the products linearly. However, it had no effect on the degree of interesterification for the first batch when the enzyme was reused. Lipozyme IM was stable in the 10‐batch test after adjusting the water content in the system. The relationship between the content of water in the system and that of FFAs in the products was evaluated and discussed.     

Synthesis and structural studies of “branched” 2-linked trisaccharides related to h-type 2 blood group determinants

A series of fucosylated trisaccharides l-Fuc-(1→2)-ß-d-Gal-(1→4)-ß-X-OMe (1-6, X = d-GlcNAc, d-Qui (6-deoxy-Glc), d-Xyl) related to H type 2 blood group determinant have been synthesized both as their α- and ß- L-Fuc anomers together with the component disaccharide starting compounds (7-11). The conformational properties of the trisaccharides together with their parent disaccharides have been investigated by NMR spectroscopy (proton and carbon chemical shifts and proton NOEs) in combination with computer modeling using the Monte Carlo approach and the HSEA force field using the GEGOP program with the main focus on the α-linked fucose series. The series of compounds allow for the investigation of interaction between the sugar units in the—in principle—linear structures, which in practice behave as branched trisaccharides. The interaction between the terminal fucose unit and the unit at the reducing end has been probed by substitution of the bulky CH₂OH group with CH₃ and H substituents, respectively. Compounds with severe steric interactions can be identified by the non-additivity of their carbon chemical shifts and subsequently confirmed by the detailed conformational assessment by NOEs and computer modeling. The most severe contacts arise in the GlcNAc and Qui trisaccharide series, whereas the Xyl-containing trisaccharide derivatives only exhibit weak steric interaction as probed by the NMR parameters.     

Sintering Mechanisms of Zirconium and Hafnium Carbides Doped with MoSi2

The microstructure of two pressureless-sintered ultra-high-temperature ceramics, namely ZrC+20 vol% MoSi₂ and HfC+20 vol% MoSi₂, was characterized by scanning and transmission electron microscopy. With regard to the ZrC–MoSi₂ system, Zr _x Si _y compounds and SiC were detected. In the HfC–MoSi₂ system, a mixed phase was detected at the triple points and identified as (Mo,Hf)₅Si₃. For both the systems investigated, the high wettability of the silicide-based phases on the matrix grains suggests that sintering is assisted by a liquid phase. This contribution reports for the first time on the sintering mechanisms of early transition metal carbides doped with MoSi₂ as a sinter additive, on the basis of the microstructural evolution observed upon sintering and in the light of phase diagrams and thermodynamical calculations.     

Small‐Molecule Targeting of the Mitochondrial Compartment with an Endogenously Cleaved Reversible Tag

Reversible mitochondrial shuttle : A novel concept in mitochondrial pharmacology allows the transport of bioactive compounds into the mitochondrial compartment and their subsequent release. A lipoic acid derivative containing a cleavable (“reversible”) triphenylphosphonium tag is endogenously cleaved by the mitochondrial aldehyde dehydrogenase (ALDH‐2) after mitochondrial accumulation.

     

Pharmacological Promiscuity: Dependence on Compound Properties and Target Specificity in a Set of Recent Roche Compounds

What parameters determine promiscuity? A compound's potential for promiscuity (pharmacological activity at multiple targets) may be influenced by molecular parameters such as ionization state, lipophilicity, and molecular weight. In an analysis of recent Roche compounds we found that a positive charge is an important determinant for potential promiscuity; aminergic activity was found to be the main reason for overt promiscuity.

     

Effects of cropping history and phosphorus source on yield and nitrogen fixation in sole and intercropped cowpea–maize systems

Symbiotic N₂-fixation, N uptake efficiency, biomass- and crop production of cowpea and maize as affected by P source, sole- and intercropped, and introduction of break crops were studied on a farmer’s fields in semi-arid Tanzania. Cowpea fixed around 60% of its N from the atmosphere amounting to 70 kg N ha⁻¹ under sole and 36 kg N ha⁻¹ under intercropping as estimated by the ¹⁵N isotope dilution method around peak biomass production. The amount of N₂-fixed was 30–40% higher when P was applied as either TSP or MRP whereas cowpea yield were unaffected. Intercropped maize with 19,000 plant ha⁻¹ accumulated the same amount of N as 38,000 sole cropped maize plants although intercropping reduced the dry matter accumulation by 25%. The N uptake efficiency of the applied ¹⁵N labelled fertiliser was 26%, which equal a total pool of early available plant N of 158 kg N ha⁻¹. Under the N deficient conditions, P application did not increase the grain yield of maize. The LER indicate that sole cropping required 18% more area than intercropping in order to produce the same grain yield, and 35% more land when LER was based on N uptakes. Introduction of break crops in the maize systems, more than doubled accumulation of dry matter and N in the grain compared to continuous maize cropping. During maturation sole crop cowpea shedded leaves containing 41 kg N ha⁻¹. The current findings underline the importance of crop diversity in Sub Saharan Africa agriculture and emphasise the need for including all residues, including shedded leaves, in nutrient balance studies.     

Experimental characterisation and constitutive modelling of RTM-6 resin under impact loading

The response to mechanical loading of the thermosetting resin system RTM-6 has been investigated experimentally as a function of strain rate and a constitutive model has been applied to describe the observed and quantified material behaviour. In order to determine strain rate effects and to draw conclusions about the hydrostatic stress dependency of the material, specimens were tested in compression and tension at strain rates from 10⁻³ to 10⁴ s⁻¹. A Standard screw-driven tensile machine was used for quasi-static testing, with an ‘in house’ hydraulic rig and Hopkinson bars for medium and high strain rates, respectively. At all rates appropriate photography and optical metrology have been used for direct strain measurement, observation of failure and validation of experimental procedures. In order to enable the experimental characterisation of this brittle material at very high rates in tension, a novel pulse shaping technique has been applied. With the help of this device, strain rates of up to 3800 s⁻¹ have been achieved while maintaining homogeneous deformation state until specimen fracture in the gauge section of the tensile specimens. The yield stress and initial modulus increased with increasing strain rate for both compression and tension, while the strain to failure decreased with strain rate in tension. An existing constitutive model, the Goldberg model has been extended in order to take into account the nonlinear strain rate dependence of the elastic modulus. The model has been validated against 3-point impact bending tests of prismatic RTM-6 beams.