一种新型分形微带天线的仿真优化

研究分形微带天线优化问题,针对多频通信需求,要求回波损耗特性实现多频性。传统分形天线结构单一、多频性能差。为了改善其多频特性,利用Cantor集和Koch曲线原理,通过建立不同宽度和长度的导带模型,并将导带宽度较窄的短截线替换为Koch曲线,提出了一种新型的适合TD-SCDMA、WiMax及WLAN的无线通信的三频段分形微带天线。利用CST软件进行仿真,得到了天线仿真回波损耗及方向图,并实测了回波损耗,实测结果与软件仿真结果吻合较好。经实验证明,所设计的天线能很好满足多频通信的需求。     

基于HCPN的发电企业项目管理工作流建模

如何对工程项目的成本、进度、质量情况进行控制和跟踪是发电企业的重要问题,应用工作流可通过对业务流程的整合及资源的合理分配解决这一问题。本文基于分层着色Petri网(HCPN),将工作流过程模型的逻辑结构和语义与HCPN中的网结构进行映射,进而利用CPN-TOOLS定义基于HCPN的项目管理工作流过程模型,并利用化简原则对工作流模型进行畅通性验证。     

基于DSP+CPLD的车牌实时识别系统的设计

传统的基于微机的车牌识别系统的方案,使得评价识别效果的识别速率和识别成功率两个重要指标相互冲突.为了解决这个问题,很多文章提出了改进算法来调和识别算法的计算量和识别的成功率,但却没有考虑识别系统的成本问题.提出了一个基于DSP CPLD的硬件识别平台,可以大大提高各种识别算法的适应性和降低系统成本.     

MnS夹杂物诱发钢材点蚀综述

MnS夹杂物诱发钢材点蚀,对钢材服役寿命、工作生产安全和社会经济发展产生巨大危害。首先,分析了MnS夹杂物诱发钢材点蚀的机理,包括电偶腐蚀机理、S和Cl-协同作用机理、封闭区域加速点蚀机理、贫铬区机理和微缝隙机理;其次,汇总了MnS夹杂物大小、形貌、分布,Cl-浓度、温度和应力对MnS夹杂物诱发钢材点蚀的影响;然后,总结了钢材防腐蚀的常用措施;最后,展望了防止MnS夹杂物诱发钢材点蚀的未来研究方向。     

用预分解技术改造Φ4×60m预热器窑的又一成功实例

介绍南京水泥工业设计研究院用预分解生产技术对山东水泥厂Φ4×60m预热器窑烧成系统进行的成功技术改造。技改设计指标为：熟料产量保证指标1500t／d，争取指标1700t／d，熟料热耗＜3762kJ／kg，熟料28d抗压强度＞60MPa。整个工程停产施工耗时仅用48d，烧成系统技改共耗资约3000万元。技改后一次点火投料成功，且点火当月即实现72h达标考核，所有设计指标均达标。     

A one-shot bargaining strategy for dealing with multifarious opponents

Bargaining is an effective paradigm to solve the problem of resource allocation. The consideration of factors such as bounded rationality of negotiators, time constraints, incomplete information, and complexity of dynamic environment make the design of optimal strategy for one-shot bargaining much tougher than the situation that all bargainers are assumed to be absolutely rational. Lots of prediction-based strategies have been explored either based on assuming a finite number of models for opponents, or focusing on the prediction of opponent’s reserve price, deadline, or the probabilities of different behaviors. Following the methods of estimating opponent’s private information, this paper gives a strategy which improves the BLGAN strategy to adapt to various possible bargaining situations and deal with multifarious opponents. In addition, this paper compares the improved BLGAN strategy with related work. Experimental results show that the improved BLGAN strategy can outperform related ones when faced with various opponents, especially the agents who frequently change their strategies for anti-learning.     

数据驱动的冷却水塔建模与节能优化操作

针对冷却水塔的节能操作给出了一种数据驱动的建模与优化方法。首先,基于冷却水塔实际运行数据,应用非负绞杀变量选择方法给出一个自适应模型用于描述冷却水塔过程,该模型对于冷却水塔出口水温具有良好的预测精度。根据变量选择结果,分析了外界空气温度与湿度对冷却能力的影响。然后,提出了基于模型的冷却水塔风机的优化操作策略,并进行实验将之应用于冷却水塔的操作。研究结果显示,基于模型的优化操作具有较大的节能空间。     

Studies on the semirigid chain polyamide—poly(1,4-phenyleneterephthalamide)

In this article, the polycondensation of terephthaloyl chloride and p-phenylenediamine was systematically studied, including the liquid–crystalline state of the solution and the spinning of poly(1,4-phenyleneterephthalamide) (PPTA). High-molecular-weight PPTA with ε_inh = 5–7 was prepared and the main factors influencing the solution polycondensation of 1,4-phenylenediamine with terephthaloyl chloride were studied in detail. Experimental results showed that the water content of the reaction system, reactant concentration, and volume ratio of mix solvents have a great influence on the inherent viscosity of the poly(1,4-phenyleneterephthalamide) obtained. The highest ε_inh was obtained at 0.3M/liter reactant concentration in a mixed solvent ratio HMPA/DMAC of 4/1 (by volume), at 0.35M/liter reactant concentration in a mixed solvent of HMPA/NMP = 7/3, and at 0.5M/liter of reactant concentration in a mixed solvent of HMPA/THF = 9/1. The water content must be controlled to less than 100 ppm in the polymerization system. In the early stage of the polycondensation process, the ε_inh of the polymer obtained increased rapidly with time. The system gelled within 2 or 3 min, while the monomer conversion reached about 100%. However, the reaction of polycondensation continued after gelation and the ε_inh of the polymer increased appreciably. We have studied the viscosity behavior at 20–155°C for the anisotropic solution of PPTA in 100% sulfuric acid (ε_inh of PPTA 2.5–4.9). Experimental results showed that, at low concentrations the viscosity of isotropic solution increases with the increase of polymer concentration to reach a maxium near the critical polymer concentration, beyond which the solution changes to an anisotropic liquid–crystalline solution. The appropriate spinning region was obtained as shown in the phase diagram determined by viscosity, degree of depolarization anisotropy, and region of thermal depolymerization. Fibers of PPTA with high modulus and high tenacity were obtained by dry-jet wet spinning. The fibers obtained have a tenacity of ～22 g/denier, a modulus of ～600 g/denier, and elongation at break ～3.5%.     

基于FPGA的列车信号采集系统设计与研究

列车工况信号对列车故障检测与分析有重要意义。以CycloneⅢ系列FPGA、AD9220、SRAM作为主要器件,利用MAX038输出信号以模拟列车工况信号,再对信号进行采集、存储进行系统设计与分析。为保证系统的稳定性和可靠性,制作了PCB板对系统进行测试。     

频率量转换数字量的集成电路设计技术

传感器在各领域有着广泛应用,为了测试传感器输出的频率值,在传感器与计算机之间需要一种可以将频率量转换为数字量的专用集成电路。介绍了输出为频率量的传感器测试基本原理,设计了基于这种传感器而研制的专用集成电路,介绍了其电路功能,电路逻辑结构,电路核心器件逻辑设计及功能验证。