Incremental iron overload during reperfusion progressively augments oxidative injury

OBJECTIVE: To determine if a relationship exists between the extent of iron-catalyzed injury and the degree of tissue iron overload during reperfusion. METHODS: To selectively increase tissue iron only during early reperfusion, isolated, buffer perfused rabbit hearts were exposed to 20 microM Fe(2+)-100 microM ADP during the last 3 minutes of ischemia and the initial 4 minutes of reperfusion. Control groups were exposed to ADP and iron-ADP regimens that did not increase intracellular iron. All the hearts received 30 minutes of normothermic global ischemia and 30 minutes of reperfusion. Heart function was monitored continuously throughout each experiment. Tissue iron and biochemical markers were analyzed at the end of experiments. RESULTS: Hemodynamic recovery was decreased and tissue lipid peroxide levels were increased in the 20 microM Fe(2+)-100 microM ADP group compared to controls. The recoveries of developed pressure and positive/negative dP/dT at 30 minutes of reperfusion were negatively correlated with tissue iron levels, while cytosol and membrane lipid peroxide levels correlated positively with the iron levels during reperfusion. CONCLUSION: The extent of oxidative injury during reperfusion was directly related to the tissue iron burden present during reperfusion. Increased lipid peroxidation was the principal chemical marker of iron-catalyzed injury.     

虚拟企业图纸数据传输

图纸数据是企业间合作需交换的一种重要的信息。本文分析了虚拟企业环境下企业之间交换图纸数据的要求，提出了一种具体的解决方案，并给出实例。     

冷成型模具低温锌系磷化

研制出适用于冷成型模具高硬度表面的低温锌系磷化工艺。其中磷化液含Zn(H2 PO4 ) 2 ·2H2 O 6 0g/L ,Zn(NO3) 2 ·6H2 O 90g/L ,NaNO2 1.5g/L ,稀土促进剂 0～ 1.0g/L ,游离酸度 4～ 6点 ,总酸度 70～ 75点。该磷化液在 4 0℃下 ,处理 30～ 4 0min后可获得厚约 10 μm的磷化膜。性能测试表明 ,其减摩、润滑性能良好 ,摩擦系数约降 0 .1,与未处理试样相比磨损量下降 96 % ,附着力 1级。     

EGS程序图形化输入平台的开发

为了使EGS能够更加方便地被工程人员使用，使用VC^ 语言开发出一套运行于Windows下的EGSWIN程序，其中包括一个图形化的输入平台，通过使用本程序，用户可以仅仅进行简单而直观的输入几何实体的工作，就可以实现区域的定义。极大的提高了EGS的使用效率。     

强度调制／直接检测（IM／DD）光纤通信系统色散限制的研究

通过引入归一化脉宽Ｐ和相对脉冲展宽因子ｑ，提出了一个适用于ＩＭ／ＤＤ系统中各种眼图恶化量ｘ和归一化脉宽Ｐ的色散限制改进公式。通过与其它理论的比较、计算机仿真和对实验数据的分析，验证了该公式的正确性，并给出了其它结果的限制条件。研究表明：当眼图恶化量ｘ为１ｄＢ左右时，对２．５Ｇｂ／；外调制信号（α＝０）而言，非色散位移光纤ＩＭ／ＤＤ系统的色散因子γ约等于０．７９，所对应的系统再生中继距离约为９００余公里。     

开放、交流与凝聚--广州大学城广外学生活动中心设计

2003年夏天，广州大学城广州外语外贸大学一期项目的单体设计在相当短的设计周期中紧张地铺开。     

Melt index prediction by weighted least squares support vector machines

Melt index is considered an important quality variable determining product specifications. Reliable prediction of melt index (MI) is crucial in quality control of practical propylene polymerization processes. In this paper a least squares support vector machines (LS‐SVM) soft‐sensor model of propylene polymerization process is developed to infer the MI of polypropylene from other process variables. Considering the use of a SSE cost function without regularization might lead to less robust estimates; the weighted least squares support vector machines (weighted LS‐SVM) approach of propylene polymerization process is further proposed to obtain a robust estimation of melt index. The performance of standard SVM model is taken as a basis of comparison. A detailed comparison research among the standard SVM, LS‐SVM, and weighted LS‐SVM models is carried out. The research results confirm the effectiveness of the presented methods. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 285–289, 2006     

石膏矿床冲击地压灾害形成原因及其防范

以往认为金属矿山开采深度超过500m、煤矿山开采深度超过200m时，应关注冲击地压问题。通过对石膏矿床冲击地压的灾害调查，表明石膏矿开采深度在150m以内都存在冲击地压、冒顶等事故隐患。根据调查情况，分析了冲击地压形成的地理条件及造成冲击压灾害的有关开采技术与管理等因素，并介绍了灾害的预测与预防措施。     

论现行行政事业单位财务会计制度和现实会计处理的矛盾

随着我国市场经济的发展与管理体制的不断改革，财会管理制度相对落后于现实工作要求，使实际工作缺乏相关规范性的指导。本文从实践出发，在分析了这一规则与实务间的矛盾后，提出对行政事业单位财务规则及会计制度的几项修改建议。     

锂离子电池正极材料锂锰氧化物的固相合成研究进展

阐述了固相合成反应的原理，综述了锂锰氧化物的几种固相合成方法，并着重介绍了熔融渍法，多步加热法，机械化学法和微波化学法等在锂锰氧化物合成中的研究进展。