光波导加速度传感器中3dB耦合器设计

光波导加速度传感器是一种实用型加速度传感器,目前广泛应用制备光学加速度计的迈克尔逊、马赫—曾德等干涉仪的核心部件都包含3 dB耦合器。3 dB耦合器的设计对光波导加速度传感器的检测精度尤为重要。介绍了所设计的光波导加速度传感器的工作原理,设计了3 dB耦合器波导的结构和参数,并用光学模拟软件OptiBPM对3 dB耦合器进行模拟。结果表明:所设计的3dB耦合器具有良好性能,符合设计要求。     

CO2在绿色化学合成中的应用

研究了CO2在绿色化学合成中的应用.CO2作为酸碱调节剂和惰性气体,在β-胡萝卜素催化氧化合成角黄素反应中,可以控制反应体系酸性,保护原料中的双键,减少副反应发生,提高催化氧化反应的选择性;异戊二烯氯醇化生成1-氯-2-甲基-3-丁烯-2-醇和1-氯-2-甲基-3-丁唏-4-醇反应中,CO2代替有机酸作酸碱调节剂,控制次氯酸的生成速度,达到调控反应的目的,反应条件温和,不副产固体.     

Preparation and self‐assembly of poly(diglycidyl maleate‐co‐stearyl methacrylate)

Poly(diglycidyl maleate‐co‐stearyl methacrylate) (P(DGMA‐co‐SMA)) with reactive epoxy groups was synthesized by reaction of poly(maleic anhydride‐co‐stearyl methacrylate) (P(MA‐co‐SMA)) and epichlorohydrin. The effect of precipitant on self‐assembly behaviors of the resultant copolymer was investigated. It was found that vesicles and nanotubule liked aggregates can be obtained through self‐assembly of P(DGMA‐co‐SMA) in THF solution using CH₃CH₂OH (EtOH) as precipitant while spheral aggregates can be obtained using H₂O as precipitant. The mechanism of the self‐assembly behavior was discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

中央空调制冷机的化学清洗

阐述了中央空调制冷机结垢的类型及其产生的原因和危害,分析了中央空调制冷机的冷媒水系统、冷却水系统的化学清洗技术和操作方法.     

Effect of water pretreatment on CO<Subscript>2</Subscript> capture using a potassium-based solid sorbent in a bubbling fluidized bed reactor

A bubbling fluidized bed reactor was used to study CO₂ capture from flue gas by using a potassium-based solid sorbent, sorbKX35 which was manufactured by the Korea Electric Power Research Institute. A dry sorbent, sorbKX35, consists of K₂CO₃ for absorption and supporters for mechanical strength. To increase initial CO₂ removal, some amount of H₂O was absorbed in the sorbent before injecting simulated flue gas. It was possible to achieve 100% CO₂ removal for more than 10 minutes at 60°C and a residence time of 2 s with H₂O pretreatment. When H₂O pretreatment time was long enough to convert K₂CO₃ of sorbKX35 into K₂CO₃ · 1.5H₂O, CO₂ removal was excellent. The results obtained in this study can be used as basic data for designing and operating a large scale CO₂ capture process with two fluidized bed reactors. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

实心注浆成型中开裂缺陷的分析及解决方法

对实心注浆过程中产生的开裂缺陷，分别从泥料配方、泥浆性能、模型制作以及人为因素等方面进行分析，初步提出一些解决方法，较好地解决实心注浆过程中坯体开裂缺陷的产生，从而提高实心注浆坯体质量。     

Gamma‐ray irradiation effect of polyethylene on dimaleimides as a class of new multifunctional monomers

Multifunctional monomers, m‐xylylenedimaleimide, p‐phenylenedimaleimide, m‐phenylenedimaleimide, and p‐phenylenedinadimide, all of which have maleimide groups, were synthesized to increase thermal and radiation stabilities. The synthesized multifunctional monomers showed good compatibility with low‐density polyethylene (LDPE). Mixtures of LDPE and these multifunctional monomers were irradiated with γ‐rays from a Co‐60 source at room temperature in a nitrogen atmosphere. The absorbed dose ranged from 0 to 160 KGy. Among these multifunctional monomers, m‐xylylenedimaleimide was the best in gel fraction enhancement. Crosslinked LDPE with m‐xylylenedimaleimide displayed a higher modulus than that of crosslinked LDPE with triallyl cyanurate. For the elongation property, LDPE with m‐xylylenedimaleimide as a multifunctional monomer showed better results than that with commercial multifunctional monomers such as triallyl cyanurate (TAC) and trimethylol propane triacrylate (TMPTA). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2339–2345, 2003     

Catalytic coal partial gasification in an atmospheric fluidized bed

The coal partial gasification catalyzed by limestone, sodium carbonate and dolomite was studied using a bench-scale atmospheric fluidized bed in the presence of air and steam at 900 °C. The effects of limestone, sodium carbonate and dolomite on composition, heating value, gas yield of product gas and carbon conversion in the catalytic coal partial gasification have been examined. The experimental results show that the catalysts can effectively improve the gas quality, the heating value and the gas yield of product gas and carbon conversion. The catalytic effect of sodium carbonate is better than that of limestone and dolomite. The increase of limestone loading can enhance the quality of product gas, such as the content of combustible gas, the high heating value and the gas yield, during coal partial gasification. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

Heat treatment of silica-fiber-reinforced BN-Si<Subscript>3</Subscript>N<Subscript>4</Subscript> matrix composite

A new wave-transparent composite reinforced by silica fibers with a hybrid matrix comprising BN and Si₃N₄ was prepared by precursor infiltration and pyrolysis, and it was heat-treated at elevated temperatures. The variations of the composite during heat treatments were characterized and investigated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The as-received composite exhibits good mechanical properties, and it is almost amorphous. When treated at 1600°C, it turned brittle, and silica fibers in it were fused; the composite showed a good crystalline form. When treated at 2100°C, the composite broke into pieces, and the composition showed only BN. Si₃N₄ was decomposed, and silica fibers were volatilized. The presence of BN probably affected the phase transitions of silica fibers. __________ Translated from Novye Ogneupory, No. 8, pp. 49–52, August 2007.     

Hydrodynamic characteristics of a FCC regenerator

The hydrodynamic and gas mixing characteristics have been determined in a FCC regenerator (0.48 m I.D.x3.4 m high) with FCC particles. Solids holdup in the dense bed decreases with increasing gas velocity, but it increases in the freeboard region. The bubble/void fraction increases with an increase along the bed height at a given gas velocity and increases with increasing gas velocity at a constant bed height. Backmixed tracer gas at the wall region is higher than that at the center region of the bed. The gas backmixing coefficient decreases with increasing gas velocity.