注水站微机数据采集与控制系统

用工控机组成了油田注水站数据采集系统．给出了系统的组成及测量方法，并讨论了系统的可靠性等问题．     

铸造合金凝固过程瞬时应力的测试

以计算机采集处理系统为手段,测试了应力框铸件凝固过程的瞬时应力.结果表明,该方法简便、速度快,精度高,可获得铸件凝固过程瞬时应力及温度的动态变化过程。     

高砂比压裂技术研究

应用由美国ＮＳＩ公司引进的“ｓｔｉｍｐｌａｎ”拟三维压裂设计软件，对影响裂缝内支撑剂铺置浓度的诸因素进行了灰色关联度分析，从中找出了主要的影响因素。并以高砂比压裂的技术指标为依据，研究了在目前压裂工艺水平下，进行高砂比压裂所必须遵循的原则。文中还对国内的高砂比压裂进行了实例分析，进一步论证了文中的观点。     

喷丸对连杆疲劳强度的影响

本文阐述了喷丸强化提高连杆表面质量和疲劳寿命。经喷丸处理,其试片弧高度迟到0.7mm时,疲劳极限提高了19%,达到440MPa,连杆实物疲劳强度试验结果表明,喷丸复盖率影响强化效果,文中还叙述了喷丸强化层应力分布的X射线应力测定工作。     

泡沫沥青混合料动态性能研究

为更好地模拟泡沫沥青混合料在车辆动载作用下的动态性能，便于与国外相关研究进行比较，采用劈裂法对混合料动态性能进行研究。通过试验研究骨料类型、级配、水泥用量等对泡沫沥青混合料动态回弹模量的影响，总结了泡沫沥青混合料动静模量的关系。     

重油隧道窑的红外温度测量

在分析重油隧道窑工况的基础上，分析了窑内烟气、燃烧物发射率、窑墙效应、环境温度对红外测温的影响以及热电偶测温的缺点，采取了相应的措施。利用中国发现专科实现了传感器输出信号的一致性。给出了传感器在重滑隧道窑现场使用２．５年后的复校数据。最后，估算出了用红外温度计替代热电偶测窑温产生的经济效益。     

Dynamic Effects in Hopkinson Bar Four-Point Bend Fracture

Hopkinson bar techniques have played an important role in the study of high-rate deformation and fracture behavior of materials. In the current work, a split Hopkinson pressure bar was developed for dynamic four-point bend fracture testing, referred to as a “two-bar (incident and transmitted bars)/four-point” (2-bar/4-pt) bend test. To further understand some fundamental issues regarding stress wave propagation in this 2-bar/4-pt bend testing system, dynamic fracture tests were performed in pulse-shaped and unshaped pulse testing conditions. The effect of the pulse shaper on the incident pulse characteristics (rise time and duration), specimen’s dynamic response (load and loading point displacement), crack initiation time and stress-state equilibrium were investigated experimentally in the current work. The present results show that stress state equilibrium can be achieved prior to fracture initiation in notched and precracked specimens. In the pulse-shaped bending test, the specimen is more likely to attain stress-state equilibrium than in an unshaped incident pulse test. The crack initiation time was extended and the time required for attaining stress equilibrium was reduced by pulse shaping due to the tailored incident pulse having a longer rise time, which ensures that stress equilibrium is achieved prior to crack initiation. This article is based on a presentation made in the symposium entitled “Dynamic Behavior of Materials,” which occurred during the TMS Annual Meeting and Exhibition, February 25–March 1, 2007 in Orlando, Florida, under the auspices of The Minerals, Metals and Materials Society, TMS Structural Materials Division, and TMS/ASM Mechanical Behavior of Materials Committee.     

The transformation of aluminium species in the processes of coagulation, sedimentation and filtration.

The aluminium toxicity is closely related to aluminium species. In this work aluminium was fractionated into seven forms: Al(T), Al(Sus), Al(C + S), Al(S), Al(C), Al(O) and Al(I). Four Al-based coagulants and simulated raw water were used in the laboratory to investigate the aluminium transformation in coagulation, sedimentation and filtration processes. It is the use of Al-based coagulants that contributes more to the increase of the residual aluminium for the low-turbidity raw water, while the Al-based coagulants, especially the polymeric aluminium coagulants, work to remove the aluminium from the high-turbidity raw water. In the case of traditional coagulants, the increase of the turbidity or the dissolved organic carbon (DOC) concentration in the raw water results in a high concentration of Al(C + S). The removal rate of aluminium species in the filtration process is not only related to its size: RAl(Sus) > RAl(C+S), RAl(C) > RAl(S), but also to the physicochemical properties of aluminium species and filter. For the kaolin-polyaluminium chloride system, a lower removal rate of aluminium species results is due to the complexation of humic acid and aluminium species.     

计算机辅助技术在水轮机调节中的应用

将计算机辅助系统中的ＣＡＡ、ＣＡＤ、ＣＡＭ及ＣＡＴ等技术移植到水轮机调节系统中，以求在水轮机调节系统中建立一套科学的工程设计方法     

浸胶工艺对Nomex蜂窝性能的影响

本文研究了浸胶工艺对Ｎｏｍｅｘ蜂窝性能的影响，分析探讨了提高Ｎｏｍｅｘ蜂窝性能及外观质量的途径。研究结果表明：采取新的浸胶工艺制作的Ｎｏｍｅｘ蜂窝，各项性能全面达到法国宇航材料标准。