代数曲面的几何连续过渡及其应用

本文对代数曲面的几何连续拼接作了研究，给出了多个代数曲面的几何连续过渡方法，同时给出了一种基于分片的曲面过渡方法。     

光催化氧化后四环素的分解率与COD去除率之间关系的探讨

以粉状无机半导体（ＺｎＯ）为催化剂，探讨了水溶液中四环素经光催化氧化分解率和ＣＯＤ去除率之间的关系。实验表明，在本实验中四环素的分解率和ＣＯＤ去除率之间有较好的正相关性。当反庆系统中有足量的活性催化剂和足够的光照时间时，绝大部分四环素将被较彻底地氧化分解成ＣＯ２，这不仅有助于光催化反应机理的研究，助于今后在环保中的实际应用。     

重力坝深(底)孔断面钢筋混凝土模型试验研究

文通过7个小尺寸和1个大尺寸的钢筋混凝土断面模型试验，研究重力坝深(底)孔在坝体自重和内水压力以及超内水压力作用下的结构特性和破坏规律。重点探讨混凝土和钢筋应力应变、混凝土开裂、裂缝宽度和裂缝扩展规律，为建立更为科学的孔口配筋理论提供依据。     

中国水稻害虫发生与防治研究进展

本文介绍了我国水稻害虫发生的种类，主要稻虫的种群消长，对水稻危害的损失，在各个不同年代，通过研究和防治，总结出对抗虫品种评价与利用的研究发展迅速，新农药的试验开发效果明显。７０年代以来，按我国稻区生态条件和稻虫为害的特点，形成了江淮、太湖平原、川西平原、洞庭湖平原和珠江三角洲五大稻区的水稻病虫综合防治技术体系，主要技术路线是以农业防治为基础，抗性品种为主体，依靠经济防治指标，协调农药防治和利用天敌     

对溢洪闸门自动监控系统中几个问题的探讨

结合某水电站介绍了溢洪闸门自动监控系统的结构、功能，讨论了该研制过程中的几个问题的解决办法．     

Surface Chemistry and Catalysis of Rare Earth Oxides I．A Study of the Reactivity of Surface Hydroxyls on CeO_2 and Pr_6O_（11） by FT－IR Spectroscopy

ＳｕｒｆａｃｅＣｈｅｍｉｓｔｒｙａｎｄＣａｔａｌｙｓｉｓｏｆＲａｒｅＥａｒｔｈＯｘｉｄｅｓＩ．Ａ　ＳｔｕｄｙｏｆｔｈｅＲｅａｃｔｉｖｉｔｙｏｆＳｕｒｆａｃｅＨｙｄｒｏｘｙｌｓｏｎＣｅＯ_２ａｎｄＰｒ_６Ｏ_（１１）ｂｙＦＴ－ＩＲＳｐｅｃｔｒｏｓｃｏｐｙ...     

TiO_2载体表面酸性的研究

利用NH_3吸附和吡啶吸附红外技术研究TiO_2的制备条件对其表面酸性的影响。结果表明,用NH_3水中和TiCl_4溶液方法制备的TiO_2(A)表面有较强的L酸中心,中和条件对表面酸性中心数目和强度有显著影响。由TiOSO_4水解方法制备的TiO_2(B)表面具有较强的L酸中心和较弱的B酸中心,引入不同添加剂可有效地调变TiO_2载体表面的酸性。     

推广的Kantorovi多项式的L_p保持Lipschitz条件性

本文研究推广的Kantorovi多项式P_n~*(f, x)在L_p[0,1]空间中的保持Lipschitz条件性质。     

CAD OF MILLIMETER WAVE OSCILLATORS WITH THE FDHB TECHNIQUE

In this paper the modelling, analysis and optimization of millimeter wave oscillatorsare investigated by using the a frequency-domain harmonic balance technique (FDHB), where theexternal-circuit impedances looking outside from the active device are calculated with a combinedtechnique of modes expansion, Galerkin, and collocation methods. The optimization results arein agreement with the experimental ones, which show the reliability of the presented model andoptimization.     

Interface microstructure and reaction in Gr/Al metal matrix composites

The interface structure in Gr/Al composites fabricated with liquid metal infiltration has been studied using transmission electron microscopy (TEM). Morphologies of interfacial reaction product, aluminium carbide Al₄C₃, formed at different manufacturing parameters were compared and, the growth mechanism of the carbide was studied by means of high resolution electron microscopy (HREM). It has been shown that the morphology of the carbide is intimately related to the processing parameters with which the composites were produced. There are two kinds of interfaces between the carbide and the aluminium matrix. They have different growth mechanisms and relative growth rates under different growth driving forces. Several crystal orientation relationships between the carbide and the aluminium matrix have been observed.