块体非晶合金制备方法的研究进展

对大块非品合金的制备方法进行了总结和归纳,阐述了不同制备方法的基本原理,并对各种制备方法的优缺点进行了讨论.最后根据对不同制备方法的分析及探讨,对大块非晶合金制备方法的研究方向进行了展望.     

A nonlinear control method for the electromagnetic suspension system of the maglev train

To deal with the inherent nonlinearity and open-loop instability of the electromagnetic suspension (EMS) system, a new nonlinear control method is proposed. The simulation results show that, for a PID controller, the overshoot of the system response to an airgap step disturbance is about 3 mm, and the transient time is 6 s; however, for the proposed nonlinear controller, there is no overshoot and transient time within 2 s. The proposed method has a faster response and stronger robustness. With a designed bi-DSP suspension controller, this nonlinear control method was implemented on the Shanghai Urban Maglev Test Line (SUMTL) to validate its effectiveness and feasibility.

     

用金属卟啉络合物引发合成高分子量聚醚

介绍了用四苯基卟啉铝络合物催化体系合成高分子量聚醚的方法。该聚合过程显示出一种持续特性。产物具有均一的链长和极窄的分子量分布，且数均分子量Ｍｎ可通过改变单体与引发剂的摩尔比来控制。     

仿土质专用肥的开发和应用前景

本文介绍了基于某些名、优农产品在其生长过程中所需要的特定敏感元素,配制出“仿土质”专用肥。经施用证明,肥效显著,经济效益可观,具有推广应用的前景。     

卫生瓷坯体配方的改进

利用本地瓷石和厂内废料代替河北邢台碱、长石和部分石英生产卫生瓷，可降低产品烧成温度，提高产品质量。     

Thermal analysis of montmorillonites modified with quaternary phosphonium and ammonium surfactants

The thermal stability of seven organically modified montmorillonites (‘organoclays’) has been investigated using differential thermal analysis, differential scanning calorimetry, and thermogravimetry in conjunction with X-ray diffractometry. Six organoclays were synthesised by replacing the interlayer inorganic cations, initially present, with quaternary phosphonium and ammonium surfactant cations. The samples modified with tetrabutylphosphonium (TBP), and butyltriphenylphosphonium (BTPP) ions have an appreciably higher thermal stability than the octadecyltrimethylammonium (ODTMA)-modified clays. Thus, in the case of TBP- and BTPP-modified montmorillonites, the onset temperature of decomposition is close to 300 °C. Samples modified with hexadecyltributylphosphonium (HDTBP) ions have a lower onset temperature of decomposition of 225 °C. In comparison, the onset temperature for ODTMA-montmorillonites (obtained at different concentrations of ODTMA-bromide) ranges from 158 to 222 °C, being highest where the concentration of intercalated surfactant is lowest. The onset temperature for a commercial alkylsilane-treated quaternary ammonium-modified organoclay (S-BEN N-400FP) is 207 °C. The basal spacing of the TBP- and BTPP-modified clays is 1.7–1.8 nm, indicating a monolayer arrangement of quaternary phosphonium ions in the interlayer space, while the value of 2.5 nm for HDTBP-montmorillonite indicates a more open structure. The ODTMA-modified samples have basal spacings ranging from 1.9 to 2.1 nm, indicative of a bilayer to pseudo-trilayer arrangement. The exceptionally high basal spacing of 3.4 nm for the S-BEN N-400FP organoclay might be due to interlayer penetration of organosilane hydrolysis products during synthesis. The thermal properties of organoclays are apparently related to the nature of the surfactants and their arrangement in the interlayer space of montmorillonite.     

Finite Time Synchronization of Delayed Quaternion Valued Neural Networks with Fractional Order

Neural Processing Letters - In this article, the finite time (FT) synchronization problem of fractional order quaternion valued neural networks with time delay is investigated. Without separating...     

Research on Action Strategies and Simulations of DRL and MCTS-based Intelligent Round Game

International Journal of Control, Automation and Systems - The reinforcement learning problem of complex action control in multiplayer online battlefield games has brought considerable interest in...     

Optimization of uncertain acoustic metamaterial with Helmholtz resonators based on interval model

Uncertainties existing in the acoustic metamaterial may strongly affect its unusual properties. Aiming at this actuality, the interval model is introduced to treat with uncertainties existing in the acoustic metamaterial with Helmholtz resonators. Frequency intervals in which the sound intensity transmission coefficients are certainly less than the required value and the effective bulk moduli are certainly negative are defined as conservative approximations. Frequency intervals in which the sound intensity transmission coefficients may be less than the required value and the effective bulk moduli may be negative are defined as unsafe approximations. The proportion of the conservative approximation and the unsafe approximation is defined as an approximate precision. Based on the quantification of uncertainties of the sound intensity transmission coefficients and the negative effective bulk moduli, an optimization model for the interval acoustic metamaterial with Helmholtz resonators is constructed. Numerical results showed that even suffering from effects of interval parameters, unusual properties of the optimized acoustic metamaterial (such as the bandgap of the sound transmission and the negative effective bulk modulus) could be improved.     

An automatic parameter calibration method for the SWAT model in runoff simulation

Runoff simulation is highly significant for hydrological monitoring, flood peak simulation, water resource management, and basin protection. Runoff simulation by distributed hydrological models, such as the soil and water assessment tool (SWAT) model which is the most widely used, is becoming a hotspot for hydrological forecasting research. However, parameter calibration is inefficient and inaccurate for the SWAT model. An automatic parameter calibration (APC) method of the SWAT model was developed by hybrid of the genetic algorithm (GA) and particle swarm optimization (PSO). Multi‐station and multi‐period runoff simulation and accuracy analysis were conducted in the basin of the Zhangjiang River on the basis of this hybrid algorithm. For example, in the Yaoxiaba Station, the calibration results produced an R² of 0.87 and Nash Sutcliffe efficiency (NSE) index of 0.85, while verification results revealed an R² of 0.83 and NSE of 0.83. Results of this study show that the proposed method can effectively improve the efficiency and simulation accuracy of the model parameters. It can be concluded that the feasibility and applicability of GA‐PSO as an APC method for the SWAT model were confirmed via case studies. The proposed method can provide theoretical guidance for many hydrological research fields, such as hydrological simulation, flood prevention, and forecasting.