Synthesis and physicochemical characterization of amphiphilic block copolymer self‐aggregates formed by poly(ethylene glycol)‐block‐poly(ϵ‐caprolactone)

Diblock copolymers with different poly(ε‐caprolactone) (PCL) block lengths were synthesized by ring‐opening polymerization of ε‐caprolactone in the presence of monomethoxy poly(ethylene glycol) (mPEG‐OH, MW 2000) as initiator. The self‐aggregation behaviors and microscopic characteristics of the diblock copolymer self‐aggregates, prepared by the diafiltration method, were investigated by using ¹H NMR, dynamic light scattering (DLS), and fluorescence spectroscopy. The PEG–PCL block copolymers formed the self‐aggregate in an aqueous environment by intra‐ and/or intermolecular association between hydrophobic PCL chains. The critical aggregation concentrations of the block copolymer self‐aggregate became lower with increasing hydrophobic PCL block length. On the other hand, reverse trends of mean hydrodynamic diameters were measured by DLS owing to the increasing bulkiness of the hydrophobic chains and hydrophobic interaction between the PCL microdomains. The partition equilibrium constants (K_v) of pyrene, measured by fluorescence spectroscopy, revealed that the inner core hydrophobicity of the nanoparticles increased with increasing PCL chain length. The aggregation number of PCL chain per one hydrophobic microdomain, investigated by the fluorescence quenching method using cetylpyridinium chloride as a quencher, revealed that 4–20 block copolymer chains were needed to form a hydrophobic microdomain, depending on PCL block length. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3520–3527, 2006     

Synthesis and characterization of in situ polymerized segmented thermoplastic elastomeric polyurethane/layered silicate clay nanocomposites

Nanocomposites based on thermoplastic elastomeric polyurethane (TPU) and layered silicate clay were prepared by in situ synthesis. The properties of nanocomposites of TPU with unmodified clay were compared with that of organically modified clay. The nanocomposites of the TPU and organomodified clay showed better dispersion and exhibited superior properties. Exfoliation of the clay layers was observed at low organoclay contents, whereas an intercalated morphology was observed at higher clay contents. As one of major purposes of this study, the effect of the silicate layers in the nanocomposites on the order–disorder transition temperature (T_ODT) of the TPU was evaluated from the intensity change of the hydrogen‐bonded and free carbonyl stretching peaks and from the peak position change of the N? H bending peak. The presence of the organoclay increased T_ODT by approximately 10°C, which indicated improved stability in the phase‐separated domain structure. The layered silicate clay caused a tremendous improvement in the stiffness of the TPU; meanwhile, a reduction in the ultimate elongation was observed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3048–3055, 2006     

新建本科院校学报的科学定位与发展研究

新建本科院校学报存在定位不够科学、学术性不强、特色不突出和编辑队伍素质参差不齐等问题.进行科学的定位是新建本科院校学报可持续发展的前提.应根据校情和社会环境条件来对学报进行定位.在科学定位基础上,要坚持以作者为本,提高原创水平;以编辑为本,提高编辑质量;以读者为本,发挥社会效益.同时,要创新学报管理机制、选题策划和征稿机制,塑造学报特色,从而实现新建拳科院校学报的科学发展.     

运行模态分析方法综述

运行模态分析(OMA)是结构动态设计和机械故障诊断的一种重要方法,是系统辨别方法在工程振动领域中的应用.为了在结构动态设计和机械故障诊断中更好地运用该方法,从频域方法、时域方法以及时频分析方法三个方面,综述了运行模态分析国内外研究现状,指出了其关键技术、存在问题以及研究发展方向.     

Effects of annealing temperature on the microstructure and properties of the 25Mn-3Si-3Al TWIP steel

Microstructures and mechanical properties of the 25Mn twinning induced plasticity (TWIP) steel at different annealing temperatures were investigated. The results indicated that when the annealing temperature was 1000°C,the 25Mn steel showed ex-cellent comprehensive mechanical properties,the tensile strength was about 640 MPa,the yield strength was higher than 255 MPa,and the elongation was above 82%. The microstructure was analyzed by optical microscopy (OM),X-ray diffraction (XRD),and transmission electron...     

微弱加性扰动对ADC影响的定量分析

在采集系统中,通常采用扰动技术来提高采样的SFDR和分辨率。本文通过傅立叶变换推导出加微弱加性扰动时ADC“总谐波失真”的数学表达式,从而定量分析微弱加性扰动对SFDR的影响;同时,利用卷积的图解法计算出微弱加性扰动时ADC的平均量化误差具体表达式,进而获取微弱加性扰动时ADC的分辨率。最后,采用matlab对加有微弱加性扰动的采样系统进行了仿真。结果表明,在ADC的输入信号上加微弱扰动信号,其分辨率有明显提高,SFDR提高了大约15dB。     

基于图形表达的基因序列模糊聚类应用研究

给出了一种新的非退化的基因图形三维表达方法,这一表达方法不仅避免了图形的重叠和交叉,同时还保留了序列的生物学特征.利用这种表达方法对H5N1病毒基因序列进行数字特征的提取,并引入基于多维PFS判别函数进行模糊聚类分析应用.在聚类分析过程中直接利用数字特征作为源数据,分析结果表明,利用该图形表达建立基因序列数字特征矩阵进行的聚类分析具有一定的合理性.     

互联电力系统未知机理低频振荡分析

近年来,我国互联电力系统多次发生低频振荡。针对南方互联电网"5.13"功率振荡,首先采用特征值分析法详细分析南方互联电网低频振荡特性,得出主要振荡模式以及发电机组参与因子和模态分布图。其次利用仿真软件PSS/E,对强相关机组的切机、三相短路故障以及原动机周期扰动分别进行时域仿真,并与实际振荡曲线进行对比。结果表明,南方电网此次功率振荡不是因为强相关机组电气侧故障,采用负阻尼机理也不能很好地解释,其产生原因可能是发电机组受原动机周期扰动有关。     

机械力化学改性硅灰石/聚丙烯性能的研究

利用气流磨对硅灰石进行机械力化学改性，并用IR分析对改性效果进行了预评价；对比了用改性前后的硅灰石填充聚丙烯(PP)的性能。结果表明：改性后硅灰石分别为由亲水疏油性变为亲油疏水性；硬脂酸质量分数为1．5％时，改性硅灰石／PP复合材料的拉伸强度和冲击强度最好。     

Continuous ethanol production from wood hydrolysate by chemostat and total cell retention culture

Chemostat and total cell retention cultures with internal filter system ofSaecharomyc.es cerevisiae H1-7 were carried out to produce ethanol from wood hydrolysate. Maximum ethanol productivity obtained in a chemostat with the aeration rate of 1 vvm was 3.79 g/(L·h). This was 20% higher than that in a chemostat without aeration. However, the substrate was not completely consumed at the dilution rate with the maximum productivity. The realistic productivity, which has higher than 99% conversion rate of substrate, was. 2.95 g/(L·h). The maximum productivity in the total cell retention culture was 6.65 g/(L·h) at the dilution rate of 0.19 h¹ and the residual glucose concentration was negligible.