AT1200型斜天井钻机的研制与改进

为了解决倾斜矿体开采中斜天井掘进问题，我院新开发了我国第一代斜天井钻机产品。本文较详细地介绍了其设计思想，并对工业试验情况进行了分析。经过三个阶段的反复试验和改进后，使该设备具有优良的技术性能和使用效果。     

变频器技术及其在煤矿中的应用

文中详细阐述了变频器技术和功能特点，及该技术在煤矿生产中构成的实用电机控制系统，并评述了它的应用前景。指出，该技术在风机、泵类等的电机控制系统中，可获得显著的节能效果。     

影响砂金矿资源可靠性的因素及改进措施

近些年砂金生产企业相继出现重大投资失误，造成严重经济损失，这都是因为地质资源不可靠所造成的。造成地质资源不可靠的原因既有技术方面的，也有人为方面的．对这两方面的原因进行了分析、阐述，并针对性地提出了改进措施：修改现行砂金矿勘探技术规范、实行小规模试验性开采、业主提前介入监督。     

TiB2 Powders Synthesis by Borothermal Reduction in TiO2 Under Vacuum

TiB₂ powders were synthesized by borothermal reduction in nanoscale TiO₂ with boron under vacuum. Reaction processes were investigated, and the effect of by‐product B₂O₃ was evaluated. Results showed that TiO₂ was firstly reduced by boron to form TiBO₃ and Ti₂O₃, and then to produce TiB₂ and B₂O₃ with increasing temperature. The reaction processes of TiB₂ powders synthesis included two‐step reduction in TiO₂ by boron and the removal of B₂O₃. The presence of B₂O₃, which was previously reported as the most important factor in promoting the coarsening of ZrB₂ and HfB₂ powders by borothermal reduction, did not lead to significant coarsening of TiB₂ powders. Due to the minor effect of B₂O₃, TiB₂ powders with small particle size and low oxygen content could be prepared by direct heat treatment of TiO₂ and boron at 1550°C under vacuum for 1 h. The particle size and oxygen content of synthesized TiB₂ powders were ~0.9 μm and ~1.7 wt%, respectively.     

Sintering Behavior and Dielectric Properties of Ultra‐Low Temperature Fired Silver Molybdate Ceramics

Ag₂MoO₄ ceramic was prepared by using the solid‐state reaction method, which could be sintered at 450°C for 2 h, having a relative permittivity of 8.08, a Qf value of 17 000 GHz, and a temperature coefficient of resonance frequency about ?133 ppm/°C. Ag₂MoO₄ ceramic was chemically compatible with silver but reacted seriously with aluminum to form (Ag_0.5Al_0.5)MoO₄ during the sintering. The fitting of infrared spectra and the Shannon's additive rule were employed to study intrinsic dielectric behaviors of the ceramics at microwave region. Ionic displacive polarization and the electronic polarization contributed almost equally to the dielectric permittivity of the ceramic at microwave region. The Ag₂MoO₄ ceramics could be a good candidate for ultra‐low temperature co‐fired microwave devices.     

A New Ferroelectric Phase of YMnO3 Induced by Oxygen‐Vacancy Ordering

Manganese oxides are good candidates of strongly correlated electron materials due to the uniqueness of electronic structure of manganese and the mobility of oxygen among lattice sites under external impacts. Here, we used electron beam as the excitation source to explore the structural evolution of YMnO₃ and identified a new phase under the radiation of electron beam in the transmission electron microscope. Analyses of the electron energy‐loss spectra reveal that this phase originates from ordered oxygen vacancy. We applied the first principles calculation to pick out the optimized stable structure with a lower polarization, and verified its correctness by electron diffraction and image simulations. Analyses of density of states indicate that weak Y–O covalence is favorable for the existence of ferroelectricity, supporting the electrostatic nature of ferroelectricity in the YMnO₃.     

Rheology of natural fibers thermoplastic compounds: Flow length and fiber distribution

The presented study investigates the flow length and the corresponding fiber content distribution in the injection‐moulded natural fiber reinforced thermoplastics and its relation to fiber type and processing parameters such as injection pressure, temperature, injection rate and mould tempering by increasing die temperature. In this research, polypropylene compounds with nominally 30 wt % hemp and sisal fibers are investigated. The influence of the injection pressure (500 and 1000 bar), melt temperature (180°C, 200°C, and 220°C), and die temperature (23°C and 80°C) on the fiber content distribution all over the sample is investigated. An increasing linear trend of fiber content along the spiral length is observed as an evidence of a fiber/polymer multiflow system. A pattern for fiber content distribution with respect to the fiber length along the injected spiral can be distinguished, where the longer fibers are usually found at the end of the injected part and the shorter fibers remain near mould entrance point. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39861.     

A physical strategy for the preparation of isotactic polypropylene spheres with microsphere and bead–string spherulite morphologies

This study mainly focuses on the formation of isotactic polypropylene (iPP) blend morphologies with microspheres and distinct bead–string spherulites. iPP microspheres have been prepared by a simple and convenient strategy through either an isothermal or a nonisothermal crystallization process based on the macrophase‐separated structure in molten state of iPP/olefin block copolymer (OBC) blend. The dimension of the iPP spheres can be adjusted easily from about 1 µm to >10 µm by controlling the compatibility and annealing conditions. It was found that any of the following three parameters, the molecular structure of OBC (particularly the octene content), molecular weight of iPP, and annealing condition can be rescaled with others in controlling the dimension of the iPP microspheres. The mechanism of the formation of iPP microspheres was studied in detail. Surprisingly, the typical spinodal decomposition morphology with interconnected or thin sheet structure is the precursor of these microspheres. During the subsequent annealing process, it breaks up and further coarsens into spherical structure. In addition, distinct spherulites with a bead–string substructure have been obtained during the isothermal crystallization. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40863.     

Zein‐based ultrathin fibers containing ceramic nanofillers obtained by electrospinning. II. Mechanical properties,gas barrier,and sustained release capacity of biocide thymol in multilayer polylactide films

The combination of electrospinning technology and nanomaterials such as nanoclays can synergistically lead to novel materials with enhanced properties and functionalities for their usage in passive and active packaging applications. Part I of this work was focused on the development of ultrathin zein fibers containing nanoclays, which were oriented along the fiber axis and increased the thermal properties. Part II presents the use of the hybrid fibers as passive and active components in multilayer packaging structures. The hybrid fibers are incorporated in poly(lactic acid) films via a two‐step process: Electrospinning and compression molding. The composites thus produced presented improved mechanical and barrier properties than the unfilled material. The natural biocide extract thymol is then incorporated in the coating, and its sustained release properties are shown. The antimicrobial capacity of the hybrid fibers was also determined against foodborne bacteria. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40768.     

Social context cognition crowd‐sourcing and semi‐automatic parametrization

This paper presents a semi‐automatic method of parameterizing an existing social context cognition model. It discusses benefits of the social context cognition models for example in personality modeling and their key issue that is parametrization. It briefly introduces social context cognition model and describes a new method of its crowd‐sourcing‐based parametrization. Later, validation is provided, and ability to recreate social context cognition in the provided samples is presented with good generalization for the unknown cases. Finally, model's stability for the continuous stream of dynamic social context input data is shown. Presented system contributes to the believable agent modeling and social simulations by making much needed applications of social context cognition models easier by addressing the so far unsolved troublesome parametrization issues. Copyright © 2016 John Wiley & Sons, Ltd.