Reappraisal of the validity of WAIS, WISC, and WPPSI short forms.

Used data from the WAIS, WISC, and Wechsler Preschool and Primary Scale of Intelligence standardization samples to reappraise the validity of all possible short forms of 2, 3, 4, and 5 subtests. Results given by a formula that takes subtest unreliability into account were compared with those given by Q. McNemar's (see 24:11) formula. The corrected formula gave lower but more realistic values, and selected best short forms that differed appreciably from those selected by McNemar's formula. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Genital sex pheromones of ixodid ticks: 1. Evidence of occurrence in anterior reproductive tract of American dog tick,Dermacentor variabilis (Say) (Acari: Ixodidae)

The occurrence of a genital sex pheromone in the anterior reproductive tract of partially fed femaleDermacentor variabilis was demonstrated by extraction and bioassay. A new type of bioassay, the neutered female assay, was developed to test the potency of extracts or chemically defined fractions to stimulate males to copulate. Electrophysiological tests confirmed the ability of males to detect the pheromone with sensilla on their cheliceral digits. Males of bothD. variabilis andD. andersoni exhibited neuronal excitation when stimulated with extracts of theD. variabilis reproductive tissues. The pheromone, which is soluble in methanol, was fractionated and found to contain at least two fractions that stimulated copulation by sexually excited males. Evidently, the pheromone is a mixture of two or more compounds. Histologic, ultrastructural, and histochemical studies suggest the vestibular vagina as the site of genital sex pheromone occurrence, presumably from secretions of the surrounding lobular accessory gland. The identity of the compounds that comprise the pheromone remains unknown.Supported by grants AI10986 and AI10987 from the National Institute of Allergy and Infectious Diseases, National Institute of Health, U.S. Public Health Service, Bethesda, Maryland 20205.     

Thermal properties of sodium borosilicate glasses as a function of sulfur content

Sulfur trioxide (SO₃) additions, up to 3.0 mass%, were systematically investigated for effects on the physical properties of sodium borosilicate glass melted in air, with a sulfur-free composition of 50SiO₂–10Al₂O₃–12B₂O₃–21Na₂O–7CaO (mass%). Solubility measurements, using electron microscopy chemical analysis, determined the maximum loading to be ~1.2 mass% SO₃. It was found that measured sulfur (here as sulfate) additions up to 1.18 mass% increased the glass transition temperature by 3%, thermal diffusivity by 11%, heat capacity by 10%, and thermal conductivity by 20%, and decreased the mass density by 1%. Structural analysis, performed with Raman spectroscopy, indicated that the borosilicate network polymerized with sulfur additions up to 3.0 mass%, presumably due to Na₂O being required to charge compensate the ionic additions, thus becoming unavailable to form non-bridging oxygen in the silicate network. It is postulated that this increased cross-linking of the borosilicate backbone led to a structure with higher dimensionality and average bond energy. This increased the mean free paths and vibration frequency of the phonons, which resulted in the observed increase in thermal properties.     

社区环境管理取得成果的要素:美国酸性矿物废水治理的经验教训

1980年代,社区环境管理(CBEM:community-based environmental management)作为处理棘手环境问题的创新途径在美国开始出现.CBEM指的是地方团体采用与各类代理机构、地方政府或其他组织以合作方式处理环境问题.为更好地理解这一流行的环境管理手段,本文首先回顾环境管理制度的演变以及影响CBEM过程的资源变化,在此基础上,本文建构了关于CBEM过程的评估框架,并列举了两个通过发起CBEM来治理酸性矿物废水对流域污染的案例.     

Reciprocal influences in children's and families' adaptation to early childhood wheezing.

Objective: The objective of the present study was to demonstrate the reciprocal relationships between family adaptation to illness and children's medication use over time among children who presented with wheezing illness in infancy but have varying illness outcomes by age 4. Design: A longitudinal design and latent growth curve models (LGM) were used to predict change in family and caregiver adaptation to illness and children's medication use over three years among 140 infants with wheezing, among families from low socioeconomic, multi-ethnic backgrounds. Main Outcome Measures: One LGM predicted level and change (slope) of family adaptation to illness from children's baseline medication use. The second LGM predicted level and change (slope) of children's medication use from baseline family adjustment to illness. In both models, illness severity, caregivers' psychological resources, and emergency department use were covaried with the independent variable. Results: Two latent growth models were found to adequately fit the data and demonstrate full reciprocal relations between family adaptation to illness and children's medication use while accounting for baseline variables. Baseline measures of caregiver psychological functioning and illness severity were also significant predictors of family adaptation and children's medication use over time. The two models were not statistically different for children with and without active asthma at 4 years of age. Conclusion: Findings support the reciprocal effects model of child and family influences on pediatric illness and underscore the importance of early indicators of individual and family functioning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Relationship of head restraint positioning to driver neck injury in rear-end crashes

Insurance claims were examined for evidence of neck injuries to drivers of passenger cars struck in the rear. Neck injury rates were significantly lower for male drivers, elderly drivers, and drivers in less severe crashes. Even after accounting for differences in driver demographics and crash severity, neck injury rates were significantly lower for drivers of cars with head restraints that were more likely to be behind the heads of motorists.     

Wetting of oriented and etched ultrahigh molecular weight polyethylene

Highly oriented gel‐spun ultrahigh molecular weight polyethylene (UHMWPE) fibers possess many outstanding properties desirable for composite materials but their adhesion to such matrices as epoxy is poor. This article describes the combined effects of drawing and surface modification on the bulk and surface properties of gel‐cast UHMWPE films emphasizing the effects of etching on both undrawn and drawn films. Drawing the films yields a fibrillar structural hierarchy similar to UHMWPE fibers and a significant increase in orientation, melting point, modulus, and strength. The effects of drawing on bulk properties were more significant than those of etching. The poor adhesion of epoxy to the smooth, fibrillar, and relatively nonpolar drawn film surface improves significantly with oxidization and roughening on etching. The interlaminar shear failure occurred cohesively in the UHMWPE, and thus the interlaminar shear failure strength was greater for the drawn UHMWPE with its greater tensile strength. Nitrogen plasma etching yielded the best results, both removing any low molecular weight surface layer and etching the UHMWPE beneath. Oxygen plasma etching enhanced wetting but was too harsh, causing extensive surface degradation and a significant reduction in mechanical properties. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 405–418, 1999     

Burnout of soot particles in a two-stage burner with a JP-8 surrogate fuel

This work focuses on the understanding of the oxidation of soot particles which were the result of using a JP-8 surrogate fuel in a two-stage burner. The two-stage system consists of an initial premixed burner where soot was generated with an air/fuel mixture, specifically a JP-8 surrogate (m-xylene and n-dodecane), under a variety of conditions. Downstream, the soot-laden combustion gases were passed through a second, flat-flame burner where soot was burned out under fuel-lean or slightly fuel-rich conditions. Soot oxidation in the secondary burner was determined by investigating particle size distribution (PSD), flame temperature, gas-phase composition, soot surface area, and soot morphology and nanostructure as a function of the height above the second burner (HAB). Measurements of soot size distribution and number concentration as a function of the HAB under fuel lean (Φoverall = 0.8) and slightly rich (Φoverall = 1.14) conditions showed a decrease in particle mean diameter and a significant increase in number concentration in the region where O₂ concentration decreased. In this region, the effectiveness factor for O₂ was found to be 1, indicating the potential for internal oxygen diffusion and burning. This caused both the breakup of the bridges cementing primary particles and the rupture of the primary particles. Higher in the burner, where modeling suggested the presence of OH^*, soot oxidation was attributed to OH^* mechanisms which are faster as compared to O₂ oxidation.     

Detecting fissionable materials in a variety of shielding matrices via delayed gamma and neutron photofission signatures—Part 2: Experimental results

Successful detection of fissionable material contained in a variety of matrices was demonstrated by photon active interrogation of fissionable and inert target materials. Samples were irradiated with pulsed 15 MeV photons generated by a LINAC and tungsten electron/photon converter, operating at 15 Hz. Matrix materials included air (no matrix), wood, water, and lead. A unique dual mode gamma/neutron detector was used to acquire data from both fission product gamma and fission product neutron emission. Neutron emission was recorded by detecting the 478 keV capture gamma from the ¹⁰B (n,α)⁷Li reaction, generating a photopeak in the recorded gamma spectrum. Two signatures were found to correctly differentiate between the fissionable target (²³⁸U) and inert targets (lead, steel, air, and beryllium), with substantial differences in delayed gamma and neutron signatures for fissionable and inert materials in all cases. The signatures are simple to compute and are not significantly affected by system variations or interferences expected during cargo scanning.     

Bacterial Kinetics of Sulfur Oxidizing Bacteria and Their Biodeterioration Rates of Concrete Sewer Pipe Samples

The importance of bacteria in catalyzing microbially induced concrete corrosion was evaluated. Experiments were conducted to determine the optimum pH and growth kinetics of four selected bacterial strains (Thiobacillus neapolitanus C2, Thiobacillus thioparus H1, Acidithiobacillus thiooxidans, and Acidiphilium cryptum LHET2). Combinations of these strains were inoculated into flasks containing ～ 42?g concrete blocks half-submerged in 600 mL of synthetic wastewater with hydrogen sulfide in the headspace air. Controls not inoculated with bacteria lost 0–3 mg/g concrete over 227 days; in the aqueous phase the minimum pH was 6–6.7 and 19–23 mg of calcium/g concrete was released. Systems inoculated with two species of neutrophilic sulfur oxidizing microorganisms (SOM) lost 8 mg/g concrete; in the aqueous phase the minimum pH was 4.5 and 25 mg of calcium/g concrete was released. The concrete samples incubated with neutrophilic and acidophilic SOM and an acidophilic heterotroph experienced the greatest deterioration, with a total mass loss of 13 mg/g concrete, minimum aqueous pH of 3.0, 28 mg calcium/g concrete released, and 47 mg sulfate/g concrete produced.