Estimation of freezing storage time and quality changes in hake (Merluccius merluccius, L.) by low field NMR

The potential of low field NMR (LF NMR) as a fast monitoring technique to estimate the quality of hake (Merluccius merluccius) frozen stored at -10°C for up to 6months was evaluated. LF NMR clearly detected three populations of water: water strongly bound to macromolecules (T(2b)), trapped water (T(21)) and free water (T(22)). As storage time increased, and concomitant with an increase in the T(22) and a decrease in the T(21) water populations, the water holding capacity (WHC) and apparent viscosity values decreased and the shear strength increased, reflecting the characteristic loss of juiciness and tougher texture developed by hake during frozen storage. Two mathematical models were constructed: a simple regression using the biexponential analysis of the relaxation times (T(21), T(22)) and amplitudes (A(21), A(22)) and a partial least square regression (PLS) of CONTIN analysis. Both models seemed suitable to estimate the quality of the product.     

Casein glycomacropeptide pH-driven self-assembly and gelation upon heating

Casein glycomacropeptide (CMP) found in cheese whey is a C-terminal hydrophilic glycopeptide released from κ-casein by the action of chymosin during cheese making. In a previous work a self-assembly model for CMP at room temperature was proposed, involving a first step of hydrophobic assembly followed by a second step of electrostatic interactions which occurs below pH 4.5. The objective of the present work was to study, by dynamic light scattering (DLS), the effect of heating (35–85 °C) on the pH-driven CMP self-assembly and its impact on the dynamics of CMP gelation. The concentration of CMP was 3% w/w for DLS and 12% w/w for rheological measurements. The solutions at pH 4.5 and 6.5 did not show any change in the particle size distributions upon heating. In contrast the solutions at pH lower than 4.5 that showed electrostatic self-assembly at room temperature were affected by heating. The mean diameter of assembled CMP increased by decreasing pH. For all solutions with pH lower than 4.5, the particle size did not change on cooling, suggesting that the assembled CMP forms formed during heating were stable. The gel point determined as G′–G″ crossover, occurred in all systems at 70 °C, but at different times. The rate of self-assembly determined by DLS as well as the rate of gelation increased with increasing temperature and decreasing pH from 4 to 2. Increasing temperature and decreasing pH, the first step of CMP self-assembly by hydrophobic interactions is speed out. All the self-assembled structures and the gels formed at different temperatures were pH-reversible but did not revert to the initial size (monomer) but to associated forms that correspond mainly to CMP dimers.     

Double‐frequency buck converter as a candidate topology for integrated envelope elimination and restoration applications in power supply of RFPAs

This paper proposes the use of double‐frequency (DF) buck converter architecture consisting of a merged structure of high and low frequency buck cells as a candidate topology for envelope elimination and restoration (EER) applications and integrated power supply of RF power amplifiers (RFPA) to obtain favorable tradeoffs in terms of efficiency, switching ripple, bandwidth, and tracking capability. It is shown that having two degrees of freedom in designing the DF buck helps to achieve high efficiency, low output ripples, and tracking capability with low ripples, simultaneously. A comparison analysis is done with regards to the mentioned performance indexes with the standard and three‐level buck converters; in addition, the results are validated in HSPICE in BSIM3V3 0.35‐µm CMOS process. Copyright © 2015 John Wiley & Sons, Ltd.     

Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting

In this study Inconel 718 cylinders were fabricated by selective laser melting in either argon or nitrogen gas from a pre-alloyed powder. As-fabricated cylinders oriented in the build direction (z-axis) and perpendicular to the build direction (x-axis) exhibited columnar grains and arrays of γ″ (body-centered tetragonal) Ni₃Nb oblate ellipsoidal precipitates oriented in a strong [2 0 0] texture determined by combined optical metallography, transmission electron microscopy, and X-ray diffraction analysis. Fabricated and hot isostatic pressed (HIP) components exhibited a more pronounced [2 0 0] columnar γ″ phase precipitate architecture parallel to the laser beam or build direction (spaced at ∼0.8 μm), and a partially recrystallized fcc grain structure. Fabricated and annealed (1160 °C for 4 h) components were ∼50% recrystallized and the recrystallized regions contained spheroidal γ′ precipitates distributed in a dense field of fine γ″ precipitates. The γ″ precipitates were always observed to be coincident with {1 0 0} planes of the γ-fcc NiCr matrix. Some δ phase precipitates in the unrecrystallized/recrystallized interfaces and recrystallized grain boundaries were also observed in the annealed samples. The microindentation (Vickers) hardness was 3.9 GPa for the as-fabricated materials, 5.7 GPa for the HIP material, and 4.6 GPa for the annealed material. Corresponding tensile properties were comparable with wrought Inconel 718 alloy.     

High prevalence of antimicrobial‐resistant Escherichia coli from animals at slaughter: a food safety risk

BACKGROUND: There has been concern about the increase of antimicrobial resistant bacteria and protection of animal and public health, along with food safety. In the present study, we evaluate the incidence of antimicrobial resistance among 192 strains of Escherichia coli isolated from faecal samples of healthy food‐producing animals at slaughter in Portugal. RESULTS: Ninety‐seven % of the pig isolates, 74% from sheep and 55% from cattle were resistant to one or more antimicrobial agents, with the resistances to ampicillin, streptomycin, tetracycline and trimethoprim–sulfamethoxazole the most common phenotype detected. Genes encoding resistance to antimicrobial agents were detected in most of the resistant isolates. Ninety‐three % of the resistant isolates were included in the A or B1 phylogenetic groups, and the virulence gene fimA (alone or in association with papC or aer genes) was detected in 137 of the resistant isolates. Five isolates from pigs belonging to phylogroup B2 and D were resistant to five different antimicrobial agents. CONCLUSION: Our data shows a high percentage of antibiotic resistance in E. coli isolates from food animals, and raises important questions in the potential impact of antibiotic use in animals and the possible transmission of resistant bacteria to humans through the food chain. © 2012 Society of Chemical Industry     

Learning Deformable Shape Manifolds

We propose an approach to shape detection of highly deformable shapes in images via manifold learning with regression. Our method does not require shape key points be defined at high contrast image regions, nor do we need an initial estimate of the shape. We only require sufficient representative training data and a rough initial estimate of the object position and scale. We demonstrate the method for face shape learning, and provide a comparison to nonlinear Active Appearance Model. Our method is extremely accurate, to nearly pixel precision and is capable of accurately detecting the shape of faces undergoing extreme expression changes. The technique is robust to occlusions such as glasses and gives reasonable results for extremely degraded image resolutions.     

Analysis of the Finite Element Method for the Laplace–Beltrami Equation on Surfaces with Regions of High Curvature Using Graded Meshes

We derive error estimates for the piecewise linear finite element approximation of the Laplace–Beltrami operator on a bounded, orientable, \(C^3\), surface without boundary on general shape regular meshes. As an application, we consider a problem where the domain is split into two regions: one which has relatively high curvature and one that has low curvature. Using a graded mesh we prove error estimates that do not depend on the curvature on the high curvature region. Numerical experiments are provided.     

Effects of drilling parameters and aspect ratios on delamination and surface roughness of lignocellulosic HFRP composite laminates

Hemp fibre‐reinforced polycaprolactone (HFRP) composite has inherent good mechanical properties and benefits which include remarkably high specific strength and modulus, low density, and renewability. No doubt, these properties have attracted wider applications of HFRP composite in engineering applications. This paper presents an investigation on the influence of drilling parameters and fibre aspect ratios, AR (0, 19, 26, 30, and 38) on delamination damage factor and surface roughness of HFRP composite laminates utilising high speed steel twist drills under dry machining condition. Taguchi's technique was used in the design of experiment. The results obtained show that increase in cutting speed reduces delamination factor and surface roughness of drilled holes, whereas increase in feed rate causes increase in both delamination factor and surface roughness. Feed rate and cutting speed had the greatest influence on delamination and surface roughness respectively when compared with aspect ratio, while an increase in fibre aspect ratios leads to a significant increase in both delamination factor and surface roughness. The optimum results occurred at cutting speed and feed rate (drilling parameters) of 20 mm/min and 0.10 mm/rev, respectively, when drilling sample of AR 19. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42879.