Electrochromic properties of tungsten-molybdenum oxide electrodes

Tungsten oxide and molybdenum doped tungsten oxide electrochromic films have been electrochemically prepared from a metal peroxide bath and experimentally tested. They were characterized by electrical and optical methods, using cyclic voltammograms and calculating the charge capacity as a function of the number of deposition cycles.The color of the electrochromic WO₃ film is strongly altered by doping it with molybdenum. Electrochromic W---Mo oxide films were fabricated by adding different percentages of molybdenum to tungsten oxide, ranging from 0.5% to 7% weight of deposition solution. Normal optical transmittance was also measured and evidence is given of different behavior if the switching for oxidation and reduction cycle, so that coloration occurs in a shorter time than the bleaching. The time constant of the process tends to increase as a function of the molybdenum oxide doping concentration.     

Neutron diffraction studies of the incommensurate modulation structure in SrxBa1-xNb2O6 mixed crystals of various compositions

Using time-of-flight technique between 100 K and 700 K a nearly constant IC modulation parameter is found. It depends only weakly on crystal composition. The intensity of the first-and second-order satellites decreases with temperature and at 700 K it is nearly disappeared. These facts are discussed with a view to the anti-phase domain model.     

Carbon fibre cloth as an electrode material: electrical conductivity and mass transfer

The paper deals with carbon fibre cloth electrodes, employed in the fabrication of composite materials. The electrical conductivity of single bundles, groups of bundles and cloth is studied. Ohm's law applies to the electrical conduction in the direction of the fibre length, but bundle conductivity decreases with the number of fibres in the bundle. Electrochemical mass transfer between a flowing electrolyte and a cloth arranged as a flow-through or a flow-by porous electrode indicates the existence of double porosity in the material. Due to double porosity, only the external surface of the cloth works as an electrode. This finding shows that the material is not suitable for such an application.     

A new write/erase method to improve the read disturbcharacteristics based on the decay phenomena of stress leakage currentfor flash memories

This paper describes a new write/erase method for flash memory to improve the read disturb characteristics by means of drastically reducing the stress leakage current in the tunnel oxide. This new write/erase operation method is based on the newly discovered three decay characteristics of the stress leakage current. The features of the proposed write/erase method are as follows: 1) the polarity of the additional pulse after applying write/erase pulse is the same as that of the control gate voltage in the read operation; 2) the voltage of the additional pulse is higher than that of a control gate in a read operation, and lower than that of a control gate in a write operation; and 3) an additional pulse is applied to the control gate just after a completion of the write/erase operation. With the proposed write/erase method, the degradation of the read disturb life time after 10⁶ write/erase cycles can be drastically reduced by 50% in comparison with the conventional bipolarity write/erase method used for NAND type flash memory. Furthermore, the degradation can he drastically reduced by 90% in comparison with the conventional unipolarity write/erase method fur NOR-, AND-, and DINOR-type flash memory. This proposed write/erase operation method has superior potential for applications to 256 Mb flash memories and beyond     

Thermal instability of Bi-Pb-Sr-Ca-Cu-O superconductor around 650δC

Bi_0.85Pb_0.15Sr_0.8CaCu_1.4O _y superconductor was quenched to room temperature after annealing at several temperatures in air. From the initial magnetization curve measurement for the annealed samples, it was found that the volume fraction of superconducting phases of the sample annealed at 650°C greatly decreased. TEM observation revealed that a second phase often appeared in the grain-boundary region for the sample annealed at 700°C. The second phase was identified as Bi₁Pb₂Sr_2.6Ca_1.6O _y by energy dispersive spectroscopy.     

A mathematical model for the prediction of temperature in a dry snow layer

A mathematical model for predicting the temperature in a homogeneous layer of dry snow is presented. The model, which is physically based, is capable of predicting diurnal temperature behaviour at the snow surface and at any depth within a snow layer given the variation in a limited set of meteorological parameters over that period. A sensitivity analysis is performed to determine the important parameters in the prediction of snow surface temperatures. These are found to be consistent with simple physical reasoning.     

Kalman decomposition for implicit linear systems

The Kalman decomposition for a general class of implicit systems is introduced and studied. The properties of strong reachability, observability, acceptance of all inputs and outer sequences, output-uniqueness, uniqueness, and trajectory observability of the original system are related to the properties of its subsystems obtained via the Kalman decomposition. The problems of transfer relation, regularizability by feedback, output feedback, and output injection are studied by means of this decomposition     

A problem of pursuit and evasion

A trajectory problem of pursuit and evasion on a plane is considered for the case of equal absolute velocities of the players. Exact solutions are obtained for fixed initial conditions.Translated from Kibernetika i Sistemnyi Analiz, No. 3, pp. 138–143, May–June, 1992.     

Development of a heart monitoring system with high-Tc DC-SQUID gradiometers

We investigated different types of high-T_c DC-SQUID gradiometers with the aim to develop an one-channel heart monitoring system for non-invasive measurements in unshielded environment. This system could be used to obtain information about the patients condition in serial examinations and in emergency cases fast and stable. Step-edge and bicrystal Josephson junctions were used to prepare planar galvanically coupled thin film gradiometers and magnetometers. These sensors were used to carry out measurements in well-shielded and non-shielded environment and we compared the different noise properties and field gradient resolutions. With different types and sizes of high-T_c DC-SQUID sensors magnetocardiograms were measured in a magnetically shielded room. The influence of antenna configurations, SQUID parameters, and cooling conditions on the measurement of magnetocardiograms will be discussed. We investigated possibilities to suppress the earth magnetic field (with pairs of Helmholtz coils) and for noise field compensation in unshielded environment.