Screw optimization of a co-rotating twin-screw extruder for a binary immiscible blend

The effect of the screw configuration of a closely intermeshing co-rotating twin-screw extruder on residence time and mixing efficiency was studied for an uncompatibilized immiscible PA6/PP (80:20) bend. Alternative screw configurations were investigated systematically. The residence time distribution (RTD) was found to be a poor indicator of the total mixing efficiency, whereas the mixing intensity function yielded considerably better information. High shear stress, sufficient residence time, and high fill ratio in the melting section of the screw were the most important factors in achieving good dispersion of the minor phase. The evolution of morphology along the screw axis depended strongly on the screw configuration. The downstream flow characteristics after the screw end determined the final morphology of the blend.     

Use of epoxy reactivity for compatibilization of PP/PBT and PP/LCP blends

Binary blends of a reactive ethylene-based terpolymer with polybutylene terephthalate (PBT) and with a liquid crystalline polyester (LCP) were studied to clarify the possible interactions between the blended polymers. The aim was to determine the suitability of the reactive terpolymer containing epoxy reactivity as a compatibilizer in blends of polypropylene (PP) and these two polyesters. The binary blends exhibited increased viscosity during blending, changes in the crystallization of the PBT phase, and an intimate contact between the blended polymers, which pointed to strong interactions or chemical reactions between the compatibilizer and both PBT and LCP. FTIR analysis confirmed the reaction of the epoxide and formation of new esters. Most probably the carboxyl end groups of the polyesters reacted with the epoxy group of the compatibilizer. In the second part of the work the same terpolymer was shown to act as a compatibilizer in PP/PBT and PP/LCP blends. This behavior was based on good mixing with the PP phase and on the chemical reactivity or strong interactions with the polyesters demonstrated in the investigations on binary blends. Addition of 5 wt% of the compatibilizer improved the impact strength, especially in PP/PBT blends where synergistic behavior was found at compositions of 80/20 and 20/80. In PP/LCP blends, the compatibilizer significantly improved the impact strength of unnotched samples at 20 wt % LCP content. In both blends, the compatibilizer reduced the size of the dispersed domains and caused them to attach better in the matrix. © 1995 John Wiley & Sons, Inc.     

Challenges and industry practices for managing software variability in small and medium sized enterprises

Software variability is an ability to change (configure, customize, extend) software artefacts (e.g. code, product, domain requirements, models, design, documentation, test cases) for a specific context. Optimized variability management can lead a software company to 1) shorter development lead time, 2) improved customer and improved user satisfaction, 3) reduced complexity of product management (more variability, same $) and 4) reduced costs (same variability, less $). However, it is not easy for software companies, especially small and medium size of enterprises to deal with variability. In this paper we present variability challenges and used practices collected from five SMEs. Our study indicates that increased product complexity can lead growing SMEs to the time-consuming decision-making. Many of the analyzed medium size of companies also expect improved tool support to help them to boost their productivity when managing increasingly complex products and increasing amount of variants In fact, in many of the analysed SMEs, a high level of automation in design, release management and testing are or become a key factor for market success By introducing the challenges and used practices related to variability the paper deepens understanding of this highly relevant but relatively under-researched phenomenon and contributes to the literature on software product line engineering.     

Readout methods for an inductively coupled resonance sensor used in pressure garment application

The methods needed to inductively read a passive resonance sensor in pressure measurement are studied. A simple dual-layer pressure sensor, a small portable phase response measurement unit and the methods to extract a coupling coefficient compensated resonance frequency are presented. The functionality and accuracy of the measurement are tested in a test rig and demonstrated in a realistic measurement environment. According to the test measurements, the overall performance of this wireless system is promising and the accuracy is within the typical range of the measurements made in the field of pressure garments.     

Probabilistic simulation of fire endurance of a wooden beam

This paper presents a probabilistic simulation approach to assessment of the fire endurance of a wooden load-bearing beam in a fire. The approach introduces several novel modelling techniques developed by VTT, such as the probabilistic fire simulator which is an interface enabling to run fire simulation models in the Monte Carlo mode and the time-dependent event-tree method which enables to take into account the active fire safety measures such as detectors, first-aid fire fighting, sprinklers and fire brigade intervention. Also the simulation of the response to heat and the mechanical performance of the structure are carried out using the Monte Carlo technique. The charring rate of the wooden beam is calculated by a new model that includes explicitly the principal sources of uncertainties and variabilites. The results show explicitly the effectiveness of different fire safety measures in reducing the risk of structural failure.     

The Effect of Lithium Disilicate Ceramic Surface Neutralization on Wettability of Silane Coupling Agents and Adhesive Resin Cements

This in vitro study was aimed to evaluate the possible changes in wettability of an etched glass ceramic surface to silane primers, adhesive resin and resin cement when the surface had been neutralized by a special neutralizing agent after etching. Rectangular shaped specimens were cut from the CAD blocks of an e-max lithium disilicate glass ceramic, cut specimens were sequentially polished and ultrasonically cleaned. All the specimens were etched for 20 s with 5% hydrofluoric acid and ultrasonically cleaned. Specimens were randomly assigned to one control group (without neutralization) and one treatment group (with neutralization) having 20 specimens each. The specimens of each group were further divided into two subgroups having 10 specimens each and tested to determine the effect of neutralizing agent on wettability of experimental and commercial silanes. Each subgroup specimen was tested for wettability to adhesive resin and commercial resin cement. Data were analyzed using two-way ANOVA. Neutralizing the ceramic surface did not show a significant effect on wettability to the silanes and the resin based materials, but the experimental silane showed better wettability than the commercial silane. The adhesive resin had statistically significant lower contact angle (high wettability) values than the commercial resin cement. The results of the current study suggested that the neutralizing agent did not have an impact on the wettability of the etched ceramic. However, there were differences in wetting properties of the silane primers, and adhesive resin versus resin composite luting cements.     

Toward Cross-Border Engineering Management: Development and Test of a Practice for Idea Generation in Customer–Supplier DFM Teams

Growing inter-organizational dependence within business ecosystems necessitates more intensive cooperation between various organizational functions, not only sales and purchasing. Engineering management is one of the functions typically regarded as an in-house activity. Prior research acknowledges certain cooperative forms such as early supplier involvement, but it falls short on identifying practices of grass-roots level cooperation. However, it is the quality of the interaction between supplier and customer that is decisive if the advantages of collaboration are to materialize. This study aims to fill this obvious gap in both theory and practice by developing and testing an inter-organizational practice for co-ideation in a supplier-customer relationship. Specifically, a way of working for idea generation to improve inter-organizational learning within specific Design for Manufacturing meetings between an industrial corporation and two of its important suppliers is developed. The evaluation of the tested co-ideation practice indicated that, in comparison to the traditional way of working, the new practice contributed to a greater number of generated ideas, was found useful in practice, and expert ratings suggested that the ideas generated were of adequate quality. The implication for practice is the proposed procedure that aims to build a safe psychological environment and help participants to transcend existing behavioral roles as representatives of suppliers and customers.     

Effect of structure modification on rheological properties of biodegradable poly(ester‐urethane)

Biodegradable lactic acid based poly(ester‐urethanes) (PEU) were polymerized and their structure and rheological properties were characterized. The polymerization process comprised two steps: lactic acid monomer was oligomerized to low molecular weight prepolymer, and this was then linked to high molecular weight PEU with chain extender, 1,6‐hexamethylene diisocyanate. The properties of PEU were modified by varying the amount of chain extender from 1.05:1 to 1.35:1 (NCO/OH ratio). The modification was mostly seen in the molecular weight distribution of the polymers, which was broadened from 2.2 to 3.5 as the amount of chain extender was increased. The telechelicity of the prepolymer was found to play an essential role in successful linking of the prepolymer units. In addition, the rheological properties of poly(ester‐urethane) were determined with capillary and dynamic rheometers. All PEU samples were pseudoplastic and broadening of their molecular weight distribution was accompanied by increased viscosity and complex viscosity at low shear rates and increased shear thinning. The temperature dependency of the measurement was pronounced. Rheological measurements also showed that PEU starts to degrade at 100°C and further rise in temperature increases the rate of degradation significantly.