Mechanical properties of a cryogenically mechanically alloyed polycarbonate–poly(aryl ether ether ketone) system

The processing–property relationship of a model cryogenically mechanically alloyed polymer–polymer system [polycarbonate (PC) and poly(aryl ether ether ketone) (PEEK)] was investigated. PC and PEEK powders were cryogenically mechanically alloyed for 10 h, and the resulting two‐phase powder particles were processed into testable coupons with a miniature ram‐injection molder. The bulk mechanical properties of the coupons made from the mechanically alloyed powders and nonmechanically alloyed powders were investigated as a function of mechanical alloying and injection‐molding parameters. The injection‐molded coupons were mechanically tested in the three‐point‐bending mode. The results demonstrated that no measurable improvement was achieved in the energy to break, strain at failure, or failure strength in the coupons made from the mechanically alloyed materials in comparison with those of the coupons made from the nonmechanically alloyed powders. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1196–1202, 2003     

Novel Reaction Kinetic Model for Anionic Polyamide‐6

Semi‐adiabatic temperature measurements are recorded and used to define semi‐empirical equations for the simulation and prediction of the anionic polyamide‐6 (APA‐6) reaction kinetics. The resin mixture used has a long infusion window before the reaction starts. The prediction of the induction time and its corresponding initial temperature of reaction is explored. By means of this semi‐empirical approach and an optimised fitting procedure, the reaction kinetics of APA‐6 can successfully be described. The adiabatic polymerisation can be predicted on the basis of an autocatalytic Kamal‐Sourour model for thermoset resins, and the crystallisation can be described using the isothermal crystallisation model.

     

Development of antimicrobial stainless steel via surface modification with N‐halamines: Characterization of surface chemistry and N‐halamine chlorination

N‐halamine modification of materials enables the development of antimicrobial materials whose activity can be regenerated after exposure to halogenated sanitizers. Surface and bulk modification of polymers by N‐halamines has shown great success, however, modification of inorganic substrates (e.g., stainless steel) remains an area of research need. Herein, we report the covalent surface modification of stainless steel to possess rechargeably antimicrobial N‐halamine moieties. Multilayers of branched polyethyleneimine and poly(acrylic acid) were immobilized onto the surface of stainless steel and the number of N‐halamines available to complex chlorine was quantified. Samples were characterized through contact angle, Fourier transform infrared spectroscopy, ellipsometry, dye assay for amine quantification, and X‐ray photoelectron spectroscopy. Increasing the number of multilayers from one to six increased the number of N‐halamines available to complex chlorine from 0.30 ± 0.5 to 36.81 ± 5.0 nmol cm^?2. XPS and FTIR confirmed successful covalent layer‐by‐layer deposition of the N‐halamine multilayers. The reported layer‐by‐layer deposition technique resulted in a greater than seven‐fold increase of available N‐halamine compared to prior reports of N‐halamine surface modifications. The N‐halamine modified steel demonstrated antimicrobial activity (99.7% reduction) against the pathogen Listeria monocytogenes. Such surface modified stainless steel with increased N‐halamine functionality, and therefore potential for rechargeable antimicrobial activity, supports efforts to reduce cross‐contamination by pathogenic organisms in the food and biomedical industries. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effects of the amount of fillers and of the crosslink density on the mechanical behavior of carbon‐black filled styrene butadiene rubbers

Several carbon‐black filled styrene‐butadiene rubbers are subjected to monotonic uniaxial tension tests in order to investigate the effects of the amount of fillers and of the crosslink density on their mechanical properties. The Young modulus, the volume changes associated with material damage and the stretch to failure are extracted and discussed. Results compare well to the literature results when exist and quantitative analysis are proposed when possible. Results show that filled rubbers are not incompressible when submitted to uniaxial tension tests and their volume changes are strongly dependent of the amount of fillers but are unaffected by the crosslink density. The latter shows strong impact on the filled rubbers stretch to failure but more interestingly this impact is comparable to what is encountered in unfilled rubbers. The stretch to failure is improved by the addition of fillers with an optimum for material filled around 30 phr. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

The Characterisation of Pluripotent and Multipotent Stem Cells Using Fourier Transform Infrared Microspectroscopy

Fourier transform infrared (FTIR) microspectroscopy shows potential as a benign, objective and rapid tool to screen pluripotent and multipotent stem cells for clinical use. It offers a new experimental approach that provides a holistic measurement of macromolecular composition such that a signature representing the internal cellular phenotype is obtained. The use of this technique therefore contributes information that is complementary to that acquired by conventional genetic and immunohistochemical methods.     

Morphological Analyses of Polymer Electrolyte Fuel Cell Electrodes with Nano‐Scale Computed Tomography Imaging

We report a three‐dimensional (3D), pore‐scale analysis of morphological and transport properties for a polymer electrolyte fuel cell (PEFC) catalyst layer. The 3D structure of the platinum/carbon/Nafion electrode was obtained using nano‐scale resolution X‐ray computed tomography (nano‐CT). The 3D nano‐CT data was analyzed according to several morphological characteristics, with particular focus on various effective pore diameters used in modeling gas diffusion in the Knudsen transition regime, which is prevalent in PEFC catalyst layers. The pore diameter metrics include those based on chord length distributions, inscribed spheres, and surface area. Those pore diameter statistics are evaluated against computational pore‐scale diffusion simulations with local gas diffusion coefficients determined from the local pore size according to the Bosanquet formulation. According to our comparison, simulations that use local pore diameters defined by inscribed spheres provide effective diffusion coefficients that are consistent with chord‐length based estimations for an effective Knudsen length scale. By evaluating transport rates in regions of varying porosity within the nano‐CT data, we identified a Bruggeman correction scaling factor for the effective diffusivity.     

跨媒体互动对印刷业有利？有弊？

在上期的报告中,我们谈到用户越来越多地集中资源．将文件应用程序和跨媒体互动（CMI）组合在一起。在本期的评论中,我们要探讨企业对跨媒体互动如此感兴趣的原因．跨媒体互动的兴起,以及跨媒体互动正在对印刷行业产生的积极影响。     

Synergy of combining sonolysis and photocatalysis in the degradation and mineralization of chlorinated aromatic compounds

Merits of using advanced oxidation processes such as sonolysis and photocatalysis as well as a combination of the two have been explored using model herbicides such as 2,4-dichlorophenoxy acetic acid and 2,4-dichlorophenoxypropionic acid and the chlorinated phenols 2,4-dichlorophenol and 2,4,6-trichlorophenol. Whereas sonolysis is quite effective in the initial degradation of chlorinated aromatic molecules, complete mineralization is difficult to achieve. Photocatalysis is selective toward the degradation of polar compounds but causes the build up of undesirable chemical intermediates. In contrast to sonolytic degradation, photocatalysis is very effective toward achieving complete mineralization. By simultaneously carrying out high-frequency sonolysis and photocatalysis we have succeeded in achieving faster and complete mineralization with no build up of toxic intermediates even at very low catalyst loadings. The synergy of combining the two advanced oxidation processes is discussed.     

Older versus younger treatment-seeking smokers: differences in smoking behavior, drug and alcohol use, and psychosocial and physical functioning

Quitting smoking benefits older individuals, yet few recent studies have described older smokers. The goal of this paper was to test a series of hypotheses about differences between smokers aged 50 years or older (50+) and those younger than age 50 (<50) presenting to the same treatment facility during 2002-2004 for participation in two randomized clinical trials: one exclusively for smokers aged 50+, and a second open to smokers aged 18 or older. As predicted, smokers aged 50+ were more tobacco dependent, had better psychological functioning, and had poorer physical functioning than those aged <50. Contrary to predictions, we found no differences in motivation to quit cigarette smoking or in alcohol use. Women aged 50+ were less likely to report marijuana use than women aged <50, and less likely than men to receive a positive diagnosis for alcohol abuse. Despite higher scores on measures of tobacco dependence, older smokers were less likely to be diagnosed as tobacco dependent or as having tobacco withdrawal using DSM-IV criteria. Rates of DSM-IV alcohol abuse and dependence were high in both age groups but were higher for smokers aged <50. We found no striking differences between studies in reasons for exclusion, but in both the proportion of individuals excluded due to current antidepressant use was high. Implications for the assessment and treatment of older adults are discussed.     

Comparison of Consumer Attitudes Between Cyprus and Latvia: An Evaluation of Effect of Setting on Consumer Preferences in the Water Industry

Models approaching consumer expectations of their water supplier from a risk perspective suggest that consumers primarily and overwhelmingly want safe drinking water supply. In this study consumer preferences in the water sector are investigated in two contrasting case studies: Cyprus, where there have been significant quantity and continuity of supply issues, and Riga, where there have been water quality issues. While water quality is undoubtedly the main priority of water consumers in Riga, in Cyprus consumers indicate that they prioritise a more reliable service even though many are sufficiently dissatisfied with water quality that they do not drink the tap water. The analysis of consumer attitudes in the two case studies suggests that when water supply is unreliable, reliability takes precedence; once it is reliable quality issues come to the fore.