Synthesis,Chiral Separation,Absolute Configuration Assignment,and Biological Activity of Enantiomers of Retro‐1 as Potent Inhibitors of Shiga Toxin

The Shiga toxin (Stx) family is composed of related protein toxins produced by the bacteria Shigella dysenteriae and certain pathogenic strains of E. coli. No effective therapies for Stx intoxication have been developed yet. However, inhibitors that act on the intracellular trafficking of these toxins may provide new options for the development of therapeutic strategies. This study reports the synthesis, chromatographic separation, and pharmacological evaluation of the two enantiomers of Retro‐1, a compound active against Stx and other such protein toxins. Retro‐1 works by inhibiting retrograde transport of these toxins inside cells. In vitro experiments proved that the configuration of the stereocenter at position 5 is not crucial for the activity of this compound. X‐ray diffraction data revealed (S)‐Retro‐1 to be slightly more active than (R)‐Retro‐1.     

Mechanical Behavior of Nanostructured and Microstructured Explosives

Nanostructured hexolites (40/60), (60/40), (80/20) and microstructured hexolite (60/40) powders are pressed by uniaxial compression to obtain explosive charges. This kind of composition is often used for the synthesis of detonation nanodiamonds. The morphology, density and cohesion of the resulting pellets are analyzed in the light of the different used compression parameters. This study allows optimizing the compression parameters to obtain well suited explosive charges from nanostructured explosive components. A good cohesion of the nanostructured explosive pellets could be obtained with increasing the temperature used for the compression. Another very important point is that the nanostructuring of the composites is maintained for every compression.     

Synthesis of cellulose triacetate-I from microfibrillated date seeds cellulose (<Emphasis Type="Italic">Phoenix dactylifera L.</Emphasis>)

Cellulose triacetate (CTA) has successfully been synthesized from microfibrillated date seeds cellulose. The cellulosic material under study constituted 84.9% amorphous phase with a degree of polymerization of 950. Acetylation was conducted at 50 °C under optimized heterogeneous conditions by acetic anhydride as acetyl donor, acetic acid as solvent and sulfuric acid as catalyst. In this process, cellulose was acetylated without dissolving the material throughout. The acetylated cellulose chains on the surface were dissolved gradually in acetic acid, which created new accessible zones. The yield of cellulose triacetate was studied varying acetic acid, acetic anhydride and catalyst concentrations, as well as reaction times. The ratio between the intensity of the acetyl C=O stretching band at around 1740 cm^?1 and the intensity of C–O stretching vibration of the cellulose backbone at 1020–1040 cm^?1 was used to optimize the reaction time. The optimal reaction conditions of 8% concentration of sulfuric acid, acetic anhydride/cellulose weight ratio of 3:1, acetic acid/cellulose weight ratio of 7:1, reaction time of 3 h and reaction temperature of 50 °C have given highest yield of cellulose triacetate, of about 79%. The obtained date seeds-based cellulose triacetate was characterized thoroughly by Fourier transform infrared (FTIR), X-ray diffraction (XRD), nuclear magnetic resonance spectroscopy (NMR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The synthesized product was identified as cellulose triacetate-I (CTA-I) characterized by a melting temperature of 217 °C and a decomposition temperature of 372 °C. These results demonstrated that date seeds can be used as potential source of microfibrillated cellulose which can be easily functionalized.     

Effects of the amount of fillers and of the crosslink density on the mechanical behavior of carbon‐black filled styrene butadiene rubbers

Several carbon‐black filled styrene‐butadiene rubbers are subjected to monotonic uniaxial tension tests in order to investigate the effects of the amount of fillers and of the crosslink density on their mechanical properties. The Young modulus, the volume changes associated with material damage and the stretch to failure are extracted and discussed. Results compare well to the literature results when exist and quantitative analysis are proposed when possible. Results show that filled rubbers are not incompressible when submitted to uniaxial tension tests and their volume changes are strongly dependent of the amount of fillers but are unaffected by the crosslink density. The latter shows strong impact on the filled rubbers stretch to failure but more interestingly this impact is comparable to what is encountered in unfilled rubbers. The stretch to failure is improved by the addition of fillers with an optimum for material filled around 30 phr. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Novel nucleophilic/basic and acidic organocatalysts for reaction between poorly reactive diisocyanate and diols

Original basic or acidic organic compounds derived from guanidine or phenyl phosphonic acid were specifically designed and tested as new catalysts for the bulk synthesis of polyurethane prepolymers from a precursor system with particularly low reactivity (secondary alcohol + aliphatic isocyanate at low temperature). Both families showed interesting catalytic activities at 60–80 °C, but must nevertheless be used in much higher amounts (1 mol%, i.e. between 0.15 and 0.50 wt%) than traditional metal-based catalysts. The efficiency of guanidine derivatives seems to be related to their nucleophilicity, whereas that of phosphonic acid derivatives depends on their acidity. However, the solubility of the considered species in the reactive medium also plays a major role. The water/alcohol selectivity of the catalysts, especially at room temperature, was then examined as an additional criterion. Guanidines are not selective and favor the reaction of isocyanate groups with water as much as that with alcohols. Phenyl phosphonic acid derivatives are more selective, and particularly pentafluorophenyl phosphonic acid displays a remarkable catalytic activity together with an acceptable selectivity and could represent an interesting and safer alternative to toxic tin and mercury derivatives for many industrial polyurethanes.     

Freezing step controls the mannitol phase composition heterogeneity

Freeze-dried samples were prepared from D-mannitol solution by selected freezing conditions. Crystalline structures of prepared samples were determined by XRD analysis, and distributions of the various crystal structures of mannitol were obtained for each sample. It was found that the amount of each polymorph was quite well correlated to the freezing conditions, namely the ice crystal nucleation temperature and the cooling rate. In case of samples prepared at fast cooling rates, the samples where the ice crystals nucleated at higher temperature contained much more stable form than the samples nucleated at lower temperature. Besides, the samples prepared at slow cooling rates predominantly contained stable crystalline forms despite of the variation of nucleation temperatures. Moreover, the experimental results also indicated that the various polymorphs were also distributed vertically through the sample along the direction of the heat flux during freezing. The tendency of the polymorph distribution through the freeze-dried cake was also elucidated by using the simulated temperature profiles during freezing. Thus, the profiles of mannitol polymorphs after the freezing derived from the temperature distributions could predict the global tendency of polymorphism behaviour, and, consequently, would be useful to achieve quality control of freeze-dried formulations.     

Residual stress measurements in bevel gear after different production phases

This article discusses residual stress measurements by means of electrochemical removal of material layers with residual stresses and simultaneous measurement of strain on the opposite specimen side with strain gages. Exact measurements are impossible particularly because of the small bevel gear module. With the method presented, the average residual stresses in the tooth root plane and underlying layers are measured. Residual stress distribution after each consecutive production phase is plotted and analyzed. Residual stress measurements enable the engineer to adequately assess each individual production phase and by that improve the quality of the complete production process.     

Hyperhomocysteinemia and Cardiovascular Disease: Is the Adenosinergic System the Missing Link?

The influence of hyperhomocysteinemia (HHCy) on cardiovascular disease (CVD) remains unclear. HHCy is associated with inflammation and atherosclerosis, and it is an independent risk factor for CVD, stroke and myocardial infarction. However, homocysteine (HCy)-lowering therapy does not affect the inflammatory state of CVD patients, and it has little influence on cardiovascular risk. The HCy degradation product hydrogen sulfide (H₂S) is a cardioprotector. Previous research proposed a positive role of H₂S in the cardiovascular system, and we discuss some recent data suggesting that HHCy worsens CVD by increasing the production of H₂S, which decreases the expression of adenosine A_2A receptors on the surface of immune and cardiovascular cells to cause inflammation and ischemia, respectively.     

Interface step-induced thin-film delamination and buckling

Atomistic simulations based on experimental observations provide the first evidence that the interface delamination of a thin film from its substrate may start from interface steps. Buckling of the film after interface gliding from both edges of its delaminated part is also observed. In the framework of the Föppl–von Kármán theory of thin plates, the expression of the critical strain beyond which the film buckles has been then analytically determined as a function of the step height and gliding displacements. Both numerical and analytical results confirm that the formation of blisters is favoured in the neighbourhood of interfacial imperfections.