Absorption effect in the calculation of a second-order nonlinear coefficient from the data of a maker fringe experiment

The effect of light absorption by sample in the analysis of Makerfringe data for estimating a second-order nonlinear coefficient hasbeen studied experimentally. Two theories, one by Jerphagnon andKurtz that neglects the absorption effect and one by Herman and Haydenthat takes into account the absorption effect, were compared with theexperimental results. It was found that Jerphagnon and Kurtz'sformula was unable to predict correctly not only the magnitude but alsothe incident angle dependence or the sample thickness dependence of thesecond harmonic signal generated by the sample with strong absorption, whereas the theory by Herman and Hayden was able to make thosepredictions fairly well. It was also found that the error in theestimated nonlinear coefficient when one uses Jerphagnon and Kurtz'sformula could be as large as 2-4 times the true value, depending onsample thickness.     

Simple model for the observed plasmon conical radiation interference patterns in a kretschmann configuration

In two previous papers we presented experimental results of measurements with a scanning plasmon optical microscope constructed in the Kretschmann configuration. The angular distribution of the conical radiation from the scanning tip was measured, and the multiple-scattering images of simple surface irregularities were detected. We make a simple model of the multiple-scattering images and compare it with our data, deriving excellent results.     

Growth technique for producing high quality superconducting YBa2Cu3O7-δ single crystals

High quality single crystals of YBa₂Cu₃O_7- (YBCO) have been grown in yttria-stabilized zirconia crucibles by using a flux method. This method yields crystals with area 3 to 4 times larger than a previous method, and 3 to 5 times more crystals. Several crystals as large as 3×4mm² in thea-b plane are routinely obtained from each crucible. The samples typically range from 10 to 60 m thick. The superconductivity transition temperatureT _c of the crystals, measured by magnetic susceptibility, falls in the range 92.5 to 93 K and the smallest transition width (10 to 90%) is less than 0.25 K. Compared with the previous method, the surface is generally smoother, with less flux, and larger untwinned regions of 1 x 1 mm² are usually found.     

Spin correlations for an Anderson impurity in conventional and unconventional superconductors

We present a theoretical study of the spin-spin correlation functionC(r) in a superconductor, whereC(r) = S · s(r);S is an impurity spin operator, ands(r) is the conduction electron spin density operator. We model the impurity using the Anderson Hamiltonian, and use the U , 1/N expansion to do the calculations. In addition to conventional superconductors, we consider unconventional superconductors, in which the order parameter (k) has a lower rotational symmetry, and has vanishing angular average. Of particular interest is the way that the behavior ofC(r) reflects two length scales, the Kondo length _k and the superconducting coherence length, ₀, and the way that its behavior is affected by the angular dependence of unconventional gaps.     

Design sensitivity analysis of acoustical damping and its application to design of musical bells

Damping characteristics of a musical bell plays an important role in characterizing the musical sound. The total damping consists of acoustical damping and internal damping. Acoustical damping depends upon resonating frequencies and vibration patterns while internal damping is a material property. The acoustical damping of a vibrating structure is formulated via boundary element method and finite element method using eigenmode decomposition. The design sensitivity of acoustical damping is derived using an adjoint variable method of the eigenvalue problem. Design optimization of a musical bell is then performed in terms of acoustical parameters. The goal of the optimization problem is to design a harmonically tuned bell with given acoustical damping values. The proposed automated design process integrates finite element analysis, boundary element analysis, design sensitivity analysis, mode-tracking algorithm and optimization module, seamlessly. It is demonstrated by numerical examples to show practical applications.     

Study of delay-independent decentralized guaranteed cost control for large scale systems

This study introduces delay independent decentralized guaranteed cost control design method based on two controller structures for nonlinear uncertain interconnected large scale systems with time delays. First, a set of equivalent Takagi-Sugeno (T-S) fuzzy models are extended to represent the systems. Then a decentralized state-feedback guaranteed cost performance controller is proposed for the fuzzy systems. Based on delay independent Lyapunov functional approach, some sufficient conditions for the existence of the controller can be cast into the feasible problem of LMIs irrespective of the sizes of the time delays so that the system can be asymptotically stabilized for all considered uncertainties whose sizes are not larger than their bounds. Finally, the minimizing approach is proposed to search the suboptimal upper bound value of guaranteed cost function. Moreover, the corresponding conditions are extended into the generalized dynamic output-feedback close-loop system. Finally, the better control performances of the proposed methods are shown by the simulation examples.     

A study of a new data association and track initiation method with normalized distance squared ordering

In an underwater environment, measurements regarding true targets and false targets (clutter) can be made. Therefore, a suitable data association method to exactly detect and track a target and an efficient track initiation method for judging tracks formed by the target should be selected in this environment. This paper attempts to propose a new data association method and track initiation method to detect and track targets more effectively. Also, the performance of the new method is tested in a series of Monte Carlo simulation runs and is compared with the existing data association and track initiation methods in a cluttered environment.     

Adaptive control of uncertain port-controlled Hamiltonian systems subject to actuator saturation

This paper deals with the problem of adaptive control of uncertain nonlinear port-controlled Hamiltonian systems subject to actuator saturation, and proposes a number of results on the control design. Firstly, the adaptive stabilization problem is studied, and a control design method is developed by using both the dissipative Hamiltonian structural and saturated actuator properties. Secondly, for the case that there are both parametric uncertainties and external disturbances in the AS systems, an adaptive H _∞ control design approach is presented. Finally, study of an example of power systems with simulations shows that the adaptive controller proposed in this paper is effective.     

An internet of things–based personal device for diabetes therapy management in ambient assisted living (AAL)

Diabetes therapy management in AAL environments, such as old people and diabetes patients homes, is a very difficult task since many factors affect a patient’s blood sugar levels. Factors such as illness, treatments, physical and psychological stress, physical activity, drugs, intravenous fluids and change in the meal plan cause unpredictable and potentially dangerous fluctuations in blood sugar levels. Right now, operations related to dosage are based on insulin infusion protocol boards, which are provided by physicians to the patients. These boards are not considering very influential factors such as glycemic index from the diet, consequently patients need to estimate the dosage leading to dose error, which culminates in hyperglycemia and hypoglycemia episode. Therefore, right insulin infusion calculation needs to be supported by the next generation of personal-care devices. For this reason, a personal device has been developed to assist and consider more factors in the insulin therapy dosage calculation. The proposed solution is based on Internet of things in order to, on the one hand, support a patient’s profile management architecture based on personal RFID cards and, on the other hand, provide global connectivity between the developed patient’s personal device based on 6LoWPAN, nurses/physicians desktop application to manage personal health cards, glycemic index information system, and patient’s web portal. This solution has been evaluated by a multidisciplinary group formed by patients, physicians, and nurses.     

数据中心安全管理的创新构想

与运动员都渴望追求好成绩一样,人们都期待数据中心能够实现高性能运转。然而,无论在什么时候,实现成功都需要遵循一个既有的过程：目标设定、设计、规划、培训、执行和维护,这些都是必要的步骤。勾画成功的蓝图是实现预期结果的重要部分,但如果没有有效的措施加以支持,