Effect of plasticizers on the thermal decomposition of chlorinated polyvinylchloride

Plasticized samples of chlorinated polyvinylchloride (CPVC) were investigated by using thermogravimetric (TG) analysis and differential scanning calorimetry (DSC). Three different plasticizers were studied, namely, dioctyl phthalate (DOP), alkyldiaryl phosphate ester (Santiciser 2148), and triaryl phosphate ester (Reofos 50). TG experiments in nitrogen showed one major decomposition stage, involving dehydrochlorination, and minor pyrolysis reaction of the hydrocarbon residue. In contrast to the three stages previously reported to occur in the nonplasticized‐stabilized CPVC, TG analyses in air showed two distinctive decomposition stages for the plasticized CPVC samples. The DOP system provided a suggestion of a third stage. The first decomposition stage was due not only to the loss of all the chlorine present, but also to loss of the plasticizer or its decomposition products. The second decomposition stage was mostly due to char oxidation, the char being formed almost exclusively from the DCE and VDC units in CPVC polymer. DSC results showed that in the presence of nitrogen, there was no significant plasticizer effect on the thermal decomposition behavior of CPVC up to about 330°C, while in air the DSC traces also show no significant differences below 400°C. The two phosphate plasticizers showed no significant differences in their effect on the thermal decomposition behavior of CPVC under the same experimental conditions. It is believed that P₂O₅ and polyphosphoric acid are among the main constituents of the residua. These would impart a protective glassy surface to the char. This will facilitate effective flame retardant action. This preliminary conclusion is based on the premise that the more stable the char layers are, the more resilient will be the protective layer, and consequently, the better the flame retardant effect. J. VINYL ADDIT. TECHNOL., 11:21–27, 2005. © 2005 Society of Plastics Engineers     

Some aspects of the analysis of coal by X-ray fluorescence spectroscopy

Bituminous coal samples from 84 distinct sources were analysed by conventional British Standards (BS) methods for phosphorus, sulphur, chlorine, ash and the ash-forming elements (calcium, silicon, aluminium, iron, sodium, magnesium, potassium, titanium and manganese). In most cases four determinations were made per element per source. Samples were crushed to ?212 μm (72 BS mesh) and pressed into aluminium cups at 20 t in^?2 (309 MPa) without binder or backing. Two pellets from each sample were analysed by wave-length dispersive X-ray fluorescence techniques, using a spectrometer equipped with a rhodium rube; the X-ray count took 60 s. The X-ray results were calibrated against the conventional results using multiple regression. The accuracy obtained was comparable with routine ‘wet chemical’ techniques. The X-ray technique is suitable for the routine determination of large numbers of samples.     

Solution processing and properties of molecular composite fibers and films

Experimental studies of fiber wet-spinning and solution processing of films of molecular composites are presented. The rigid rod polymer was poly (p-phenylenebenzobisthiazole) (PPBT) and the flexible polymers were poly (2,5(6′)-benzimidazole) (ABPBI) and poly (2,5(6′)-benzothiazole) (ABPBT). Effects of the flexible polymer molecular entanglements in solution on the processing are discussed. These fibers and films have very high modulus and strength, which improve upon heat treatment. The uniaxial modulus of highly oriented molecular composites follows the linear rule of mixtures.     

Ozone-induced alterations of lamellar body lipid and protein during alveolar injury and repair

Alveolar Type II cells in the rat respond to severe, acute ozone injury (3 ppm ozone for eight hours) by increasing their intracellular pool of surfactant; however, the newly stored surfactant is abnormal in composition. Lamellar bodies isolated between 24 and 96 hours after ozone exposure contained significantly more cholesterol in relation to phosphatidylcholine than did controls. By contrast, the cholesterol content of surfactant isolated from alveolar lavage remained unchanged throughout an 8-day post-ozone period. The total protein content of lamellar bodies in relation to phosphatidylcholine was significantly decreased at 24 and 48 hours post-ozone. Analysis of lamellar body proteins by sodium dodecyl sulfate-polyacrylamide gel electrophoresis revealed that the amount of a 14 kDa proteolipid was greatly reduced at the end of the eight-hour ozone exposure and remained low for at least 48 hours. This proteolipid appeared to be a specific lamellar body component since it was not detected in extracellular surfactant. The findings indicate that oxidative alveolar stress initiates characteristic alterations in both lipid and protein constituents of stored surfactant, without perturbation in the composition of extracellular surfactant.     

Thermomechanical heat of deformation studies on cis-polybutadiene

Thermomechanical heat of torsional deformation measurements have been made on crosslinked cis-polybutadiene by means of a Calvet microcalorimeter operated at 30°C. When corrected for volume changes utilizing the Gaussian statistical theory of elasticity, the data gave a value for the relative energy contribution to the torsional couple, $\text{M}{}_{\mathrm{e}}\text{M}$, of 0.14 ± 0.02. Measurements were also made on a sample subjected to simple tensile deformations. The relative energy contribution to the tensile force ($\text{f}{}_{\mathrm{e}}\text{f}$) was found to agree within experimental error with the value obtained for $\text{M}{}_{\mathrm{e}}\text{M}$, and the two results gave an average value for din $\text{〈r}{}^2{}_0\text{〉}\text{d}\text{T}$ of 4.1 × 10^?4 K^?1.     

Catalytic characteristics of various rubber-reinforcing carbon blacks in decomposition of methane for hydrogen production

Carbon black has recently been reported to act as an effective catalyst for methane decomposition and to exhibit stable catalytic behavior despite carbon deposition, and thus it can be used for CO₂-free production of hydrogen from natural gas. In this work, various carbon blacks with different primary particle size were investigated with respect to methane decomposition under atmospheric pressure from 1123 to 1223 K. Catalytic characteristics, such as activity, activation energy and reaction order, were investigated and compared. It was observed that with decreasing primary particle size (or increasing specific surface area), the specific activity increased and the activation energy decreased. The reaction orders for various pelletized, rubber-reinforcing carbon blacks were 0.6–0.7, about the same regardless of the primary particle size, while they were near 1 for fluffy carbon blacks. Fluffy carbon black showed higher activity and activation energy than the pelletized carbon black of the same primary particle size. Changes of the surface morphology during carbon deposition were observed by TEM. Variations of the number of active sites were discussed in regard of the primary particle size, carbon deposition and binder. The presence of different types of active sites was also suggested.     

A comparison of vapour pressure measurements of quinizarin and leuco-quinizarin via transpiration and thermogravimetry

The vapour pressure of solids can be obtained using a number of methods, including the Knudsen effusion method, the Knudsen torque-effusion method and a transpiration method. Each method has benefits and disadvantages. Reported is a comparison of vapour pressure data for two compounds, quinizarin and leuco -quinizarin, using a transpiration method and a recently developed method based on thermogravimetry. Thermogravimetry provided vapour pressure–temperature dependence data for each compound with expediency and in agreement with the transpiration method.     

CO hydrogenation over potassium-promoted Fe/carbon catalysts

The effects of potassium on the catalytic behavior in CO hydrogenation over K-promoted Fe/carbon catalysts having low K/Fe ratios were investigated. Even though the doses of potassium were low the promotional effects were pronounced, especially on the olefin-to-paraffin ratio, and theC ₃ toC ₄ olefin selectivities of the K-promoted catalysts were as high as 51 to 66 mol%. Over the catalysts having no or low potassium content the olefin-to-paraffin ratio and the ratio of the CO₂ formation rate to the rate of CO conversion to hydrocarbons remained roughly the same regardless of temperature, while over the K-promoted catalysts having higher potassium content they increased with temperature. Formation of significant amounts of filamentous carbon was observed in the K-promoted catalysts; however, the carbon deposition did not appear to affect the inherent activity and selectivity of the K-promoted catalysts.     

Lipids of seven cereal grains

Grain samples of representative varieties of barley, corn, oats, rye, sorghum, triticale, and wheat grown commercially in the north central US were analyzed. Chemical constituents of the varieties studied are presented to provide an overview of their characteristics. Lipids of the milled grain samples were solvent extracted, classified by silicic acid column chromatography, and separated by thin layer chromatography. Fatty acid composition of the total lipid was determined by gas liquid chromatography and the fatty acid content was determined by saponification and extraction. Total lipid content of the grains ranged from 2.3% for ‘Polk’ wheat to 6.6% for ‘Chief’ oats. Lipid composition varied considerably. The row crops, corn and sorghum, have a high neutral lipid and low glycolipid content. The small grain varieties have a more balanced distribution among neutral lipids, glycolipids, and phospholipids. Fatty acid composition of the total lipid was similar for all grains. Minor qualitative differences were noted among the lipid classes of the 7 cereals.     

Evaluation of thermodynamic theories to predict interfacial tension between polystyrene and polypropylene melts

The commonly used thermodynamic theories (mean field theory and the square gradient theory) to predict interfacial tension between polymers have been modified. The results of these theoretical developments have not yet been fully tested and compared to experimental data. In this paper, experimental data for the effects of temperature, molecular weight, and molecular weight dispersity on interfacial tension for polypropylene/polystyrene polymer pairs are compared with the predictions of the new versions of the above theories. To evaluate these theories, it is necessary to know the Flory-Huggins interaction parameter for the polymer pairs studied. The relation correlating the Flory-Huggins interaction parameter to the Hildebrand solubility parameter was not suitable for evaluating the theoretical predictions of interfacial tension. Instead, the Flory Huggins interaction parameter was expressed as the sum of an enthalpic contribution, χ_H, and entropic contribution, χ_s. In the absence of reliable experimental values, a method was developed to evaluate the two contributions, based on interfacial tension data. The procedure provided an interaction parameter that is allowed to depend on molecular weight. When this approach was used, the predictions of only the new version of the square gradient theory were in good agreement with the experimental data for the influence of temperature and molecular weight on interfacial tension. However, the theory predicted the effect of polydispersity on interfacial tension only at high temperatures.