Influence of processing parameters on lattice parameters in laser deposited tool alloy steel

Laser aided direct metal deposition (DMD) has been used to form AISI 4340 steel coating on the AISI 4140 steel substrate. The microstructural property of the DMD coating was analyzed by means of scanning electron microscopy, transmission electron microscopy and X-ray diffractometry. Microhardness of the DMD was measured with a Vickers microhardness tester. Results indicate that DMD can be used to form dense AISI 4340 steel coatings on AISI 4140 steel substrate. The DMD coating is mainly composed of martensite and retained austenite. Consecutive thermal cycles have a remarkable effect on the microstructure of the plan view of the DMD coating and on the corresponding microhardness distribution. Orientation relationships among austenite, martensite and cementite in the DMD coating followed the ones in conventional heat treated steels. As the laser specific energy decreased, cooling rate increased, and martensite peaks broadened and shifted to a lower Bragg's angle. Also martensite lattice parameters increased and austenite lattice parameters decreased due to the above parameter change.     

On the implementation of membrane models in computational fluid dynamics calculations of polymer electrolyte membrane fuel cells

The implementation of phenomenological membrane models within computational fluid dynamics (CFD) codes requires coupling of the conservation equation for water content within the membrane to the conservation equations for species mass outside the membrane. It is common practice to treat water and current transport within the membrane as one-dimensional (1D), i.e., normal to the membrane surface only. The purpose of this study is to investigate the accuracy and efficiency of various strategies of implementing a phenomenological membrane model within the framework of a two-dimensional (2D) CFD code. Springer's membrane model was compared against two other models available from the literature, and the accuracy of each model was assessed by comparing predicted results against experimental data. Results appear to indicate that the Springer model and the Nguyen and White model over-predict the drying of the membrane, while the Fuller and Newman model provides the best match with experimental data. Following these studies, three strategies for implementation of the membrane model were investigated: (1) 2D transport in membrane, (2) 1D transport in membrane and (3) 1D transport with approximate transport properties. Fuller and Newman's membrane model was used for these studies. The results obtained using the three approaches were found to be within 4% of each other, while there was no significant difference in the computational time required by the three models, indicating that an analytical 1D transport model for the membrane that uses approximate properties is adequate for describing transport through it.     

Induction of ceruloplasmin synthesis by IFN-gamma in human monocytic cells

Ceruloplasmin is a 132-kDa glycoprotein abundant in human plasma. It has multiple in vitro activities, including copper transport, lipid pro- and antioxidant activity, and oxidation of ferrous ion and aromatic amines; however, its physiologic role is uncertain. Although ceruloplasmin is synthesized primarily by the liver in adult humans, production by cells of monocytic origin has been reported. We here show that IFN-gamma is a potent inducer of ceruloplasmin synthesis by monocytic cells. Activation of human monoblastic leukemia U937 cells with IFN-gamma increased the production of ceruloplasmin by at least 20-fold. The identity of the protein was confirmed by plasmin fingerprinting. IFN-gamma also increased ceruloplasmin mRNA. Induction followed a 2- to 4-h lag and was partially blocked by cycloheximide, indicating a requirement for newly synthesized factors. Ceruloplasmin induction in monocytic cells was agonist specific, as IL-1, IL-4, IL-6, IFN-alpha, IFN-beta, TNF-alpha, and LPS were completely ineffective. The induction was also cell type specific, as IFN-gamma did not induce ceruloplasmin synthesis in endothelial or smooth muscle cells. In contrast, IFN-gamma was stimulatory in other monocytic cells, including THP-1 cells and human peripheral blood monocytes, and also in HepG2 cells. Ceruloplasmin secreted by IFN-gamma-stimulated U937 cells had ferroxidase activity and was, in fact, the only secreted protein with this activity. Monocytic cell-derived ceruloplasmin may contribute to defense responses via its ferroxidase activity, which may drive iron homeostasis in a direction unfavorable to invasive organisms.     

Resonant tunneling diodes: models and properties

The resonant tunneling diode (RTD) has been widely studied because of its importance in the field of nanoelectronic science and technology and its potential applications in very high speed/functionality devices and circuits. Even though much progress has been made in this regard, additional work is needed to realize the full potential of RTD's. As research on RTD's continues, we will try in this tutorial review to provide the reader with an overall and succinct picture of where we stand in this exciting field or research and to address the following questions: What makes RTD's so attractive? To what extent can RTD's be modeled for design purposes? What are the required and achievable device properties in terms of digital logic applications? To address these issues, we review the device operational principles, various modeling approaches, and major device properties. Comparisons among the various RTD physical models and major features of RTD's, resonant interband tunneling diodes, and Esaki tunnel diodes are presented. The tutorial and analysis provided in this paper may help the reader in becoming familiar with current research efforts, as well as to examine the important aspects in further RTD developments and their circuit applications     

Solidification behavior and microstructural evolution during laser beam—material interaction

A laser-assisted visualization technique has been used to monitor the solidification behavior at the tail of a molten pool created by scanning high energy density laser beam. A high speed digital camera with spatial resolution of 64×64 pixels and temporal resolution of 40,500 frames/s has been employed along with a novel concept of illuminating the interaction zone by a secondary visible probe laser. This technique enabled in situ monitoring of the solid/liquid interface due to the characteristic difference in the reflectivity between solid and liquid surfaces. It is observed that the solidification behavior is unstable and is highly influenced by the instabilities in the flow, which develop from the complex laser-material interaction process. Quite often the growth front remelted back due to the fluctuating thermal field driven by flow instability. The fluctuations in the growth front and the fluctuations in the laser-material interaction process have been monitored simultaneously, however, no correlation is apparent. The influence of flow instability on the resulting microstructure has been analyzed.     

An investigation into the fast- and slow-scale instabilities of a single phase bidirectional boost converter

We develop an analytical map for a single phase bidirectional boost converter. This map enables the analysis of the dynamics of the converter faster and without any convergence problems. For the closed-loop converter, we show how instabilities can occur on the slow and fast scales. Conventional analyzes based on averaged models can not predict the fast-scale instability because such models do not account for the switching-frequency ripple.     

Effect of zinc supplementation on cell-mediated immunity and lymphocyte subsets in preschool children

The pattern and distribution of periodontitis were investigated in 162 randomly selected dogs available for necropsy in veterinary practice. There were 82 males and 80 females of 50 different breeds (150 dogs were pure-bred and 12 were mongrels, aged between 7 months and 14 yr. Presence of periodontitis was determined by assessment of alveolar bone loss on radiographs of the skulls and jaws. Periodontitis occurred frequently with increasing age, although the prevalence varied markedly among and within different breeds. Of the breeds most represented in the sample, periodontitis was most frequently seen in poodles and dachshunds but was rarely recognized in German shepherd dogs. Regardless of age, the vast majority of the dogs displayed either one or both of two different radiographic patterns of alveolar bone loss. One pattern was characterized by slight, horizontal alveolar bone loss involving interradicular and interdental areas. The other pattern was one of predominantly crater-like, or narrow, vertical bone defects which, when advanced, often extended around a single root or tooth to surround the root apices. The two types of patterns did not seem to be breed-dependent. The posterior maxillary and mandibular premolars and molars were the most frequently affected teeth. Alveolar bone loss was most severe in the maxilla, while corresponding bone loss in the mandible was more often related to increasing age.     

EFFECT OF PARTICLE SIZE DISTRIBUTION ON TRANSFER EFFICIENCY AND APPEARANCE IN POWDER COATINGS

Three powder samples of identical chemistry were taken from the same lot under different conditions: (1) relatively wide size distribution (Sample A) d₅₀ = 18.1μm, (2) narrow size distribution, d₅₀ = 22.4μm (Sample B), and (3) wide size distribution with more fines than Sample A, d₅₀ = 15.1μm (Sample C). Within this relatively minor variation of Particle Size Distribution (PSD) with respect to d₅₀, the appearance of the powder with minimum d₅₀ (15.1μm) was best. The results show two trends: (1) PSD with d₅₀ about 15μm can result in excellent appearance (GM Tension in the range of 18 to 19 on a scale of 0 to 20), and (2) the width of the distribution need not be narrow when d₉₀ is less than 40μm.

Polymer powders in this size range do not fluidize well without agitation, but when vibration was applied, all three samples had R values (fluidity) 200 or above, which is adequate for fluidization and transport. The maximum R value was obtained for Sample A, which had the widest size distribution. Thus, the fluidity tests agreed with the expected results.     

Microstructure development in the directionally solidified Al–4.0 wt% Cu alloy system

The effect of convection on microstructure formation is examined experimentally and theoretically for the vertically upwards-directional solidification of Al–4.0 wt% Cu alloys. In this alloy system, the rejected solute is heavier than the solvent so that fluid flow occurs due to the presence of radial gradients in temperature and composition. A numerical model is presented which shows that convection effects cause the composition to vary along the interface such that the composition increases from the center to the periphery of the sample. This composition variation causes the macroscopic interface to become convex, and give rise to a systematic variation in microstructure along the interface. Critical experiments have been carried out to examine planar to cellular (and cellular to dendritic) transition in a given sample due to the increase in concentration along the interface, and the experimental results are analyzed through the measurements of interface composition and thermal gradient. In addition, the variation in local primary spacing with interface composition is also characterized and compared with the results of the numerical model. It is shown that microstructure transitions and microstructural scales can be correlated quantitatively with the theoretical results based on interface composition and on temperature and solute gradients at the interface.