Effects of magnesium sulfate and lidocaine in the treatment of ventricular arrhythmias in experimental amitriptyline poisoning in the rat

OBJECTIVES: Amitriptyline poisoning is associated with ventricular arrhythmias. Standard treatment is sodium bicarbonate but further intervention may be necessary. The present study compared the actions of lidocaine and magnesium sulfate on ventricular tachycardia induced by amitriptyline. DESIGN: Nonrandomized, controlled, intervention trial. SETTING: University laboratory. SUBJECTS: Thirty male Wistar rats anesthetized with pentobarbital and mechanically ventilated. INTERVENTIONS: After pretreatment with norepinephrine, the animals were subjected to a continuous infusion of amitriptyline. After the appearance of ventricular tachycardia, they were treated with magnesium sulfate (45 mg/kg + 15 mg/kg/min) or lidocaine (1 mg/kg + 0.5 mg/kg/min) or glucose infusion as a control. MEASUREMENTS AND MAIN RESULTS: In the group treated with magnesium sulfate, electrocardiogram tracings demonstrated that nine of ten animals converted from ventricular tachycardia to sinus rhythm compared with one of ten in both the lidocaine- and glucose-treated groups (p < .001). The animals treated with magnesium sulfate also had a significantly longer total time in sinus rhythm (10.0 +/- 1.6 mins) than those rats treated with lidocaine (1.7 +/- 1.5 mins) or glucose (1.5 +/- 1.5 mins). Magnesium sulfate significantly decreased blood pressure and heart rate, but no severe hemodynamic side effects were observed. CONCLUSIONS: Magnesium sulfate is effective in converting ventricular tachycardia in hyperadrenergic amitriptyline poisoning. In contrast, lidocaine had no effect on arrhythmias.     

A hybrid wafer-dicing process for GaAs MMIC production

A dicing process for GaAs MMIC (monolithic microwave integrated circuit) wafers using spin-on wax for wafer mounting and a hybrid process of wet chemical etching/mechanical sawing for chip dicing is described. This process minimizes ragged chip edges and reduces generation of microcracks in addition to the elimination of the plated gold burrs on the backside of the diced MMIC chips. This process gives a uniformity of -3 μm across a 2-in wafer following the completion of the whole backside process. This GaAs chip dicing technique is amenable to production because it exhibits both a very high chip yield (>90%) and nearly flawless edges     

Dynamic arrays for fast, efficient, data manipulation during image analysis: a new software tool for exploratory data analysis.

Memory reallocation is used to construct a run-time data structure for fast/efficient storage of information during collection and analysis. The data structure presented uses dynamic memory but does not require the use of pointers to link nodes of information together. It allows for simple and efficient access to data via array indexing rather than through the use of lists or tree structures and it provides flexibility for competing storage requirements that are determined dynamically. The data structure is developed in the C programming language and a suite of ANSI standard C subroutines that make up a run-time data structure management system is provided.     

METEOR: a constraint-based FIR filter design program

It is proposed to specify a filter only in terms of upper and lower limits on the response, find the shortest filter length which allows these constraints to be met, and then find a filter of that order which is farthest from the upper and lower constraint boundaries in a minimax sense. The simplex algorithm for linear programming is used to find a best linear-phase FIR filter of minimum length, as well as to find the minimum feasible length itself. The simplex algorithm, while much slower than exchange algorithms, also allows the incorporation of more general kinds of constraints, such as concavity constraints (which can be used to achieve very flat magnitude characteristics). Examples are given to illustrate how the proposed and common approaches differ, and how the proposed approach can be used to design filters with flat passbands, filters which meet point constraints, minimum phase filters, and bandpass filters with controlled transition band behavior     

建立数据库用微机进行钻井液设计

为了更好地指导现场钻井液施工,利用微机建立有关数据库和相应的设计软件,根据地质、工程的要求和井下情况进行钻井液设计,其特点是资料全面、程序运行可靠且操作简便,设计符合现场情况,施工顺利。在千12区块,用微机设计的109口井与人工设计的75口井相比,钻井速度提高,井下复杂情况减少,提高了经济效益。     

A novel technique for fabrication of metallic structures on polyimide by selective electroless copper plating using ion implantation

The successful use of palladium ion implantation into polyimide to seed an electroless plated film of copper on the polyimide surface is reported. Polyimide (Hitachi PIX 3400) was implanted with palladium ions to doses of 1.5 × 10¹⁵ − 1.2 × 10¹⁷ ions cm⁻² using a MEVVA ion implanter. The implanted ions acted as sites for nucleation of copper film. A copper film was then deposited on implanted polyimide using a commercial electroless plating solution. The ion energy was kept low enough to facilitate a low critical ‘seed’ threshold dose that was measured to be 3.6× 10¹⁶ Pd ions cm⁻². Test patterns were made using polyimide to study the adaptability of this technique to form thick structures. Plated films were studied with optical microscopy, Rutherford Backscattering Spectrometry (RBS) and Profilometry. The adhesion of films was qualitatively assessed by a ‘scotch tape test’. The film growth (thickness) was observed to be linear with plating time. A higher implantation dose led to greater plating rates. The adhesion was found to improve with increasing dose.     

Comparative study of crystallization processes in Sb2Te3 films using laser and thermal annealing techniques

Adherent and pin-hole free amorphous Sb₂Te₃ thin films have been obtained by vacuum evaporation at substrate temperatures ≤25 °C. The films have been crystallized by thermal and laser annealing, and the crystallization processes monitored as a function of annealing temperature and laser scan speed. A comparative study of topography reveals disk-shaped crystallized areas in thermal crystallization and dendrite growth in the laser induced process. The crystallized films in both cases contain a single Sb₂Te₃ phase. Activation energy of 2 eV for crystallization, determined using differential scanning calorimetery indicates good room temperature stability of the amorphous states.