Thermal studies of Cr2O3 doped CaCO3-SiO2 (2∶1) system

Mixtures of CaCO₃SiO₂ in 21 molar ratio were subjected separated to thermal analysis with varying concentration of Cr₂O₃ (0.1 to 5%) as dopant. The activation energy (E _a) and enthalpy (H) shows a decreasing trend with 0.1 to 1% Cr₂O₃ and attains a minimum value with 1% dopant. 0.1 to 0.5% Cr₂O₃ helps in the formation of and C₂S, (Cement Chemistry notations, C = CaO, S = SiO₂) phases at 1400° C and above but 1% Cr₂O₃ stabilizes -C₂S phase along with a little free lime and CaCrO₄. A small quantity of CaCrO₄, Cr₂SiO₂ and -C₂S are also formed along with the major phases with 5% Cr₂O₃ indicating that Cr³⁺ can substitute both Ca²⁺ and Si⁴⁺ ions in the C₂S lattice.     

Effect of stress-strain-law transients on formability

The effect of work-hardening changes, of the type that follow a rapid change of strain state or strain rate, on formability has been investigated using finite element modeling (FEM). A standard sheet tensile test was chosen as an arbitrary forming operation and a rigid-viscoplastic FEM program was employed for analysis. In each case, a transitional region of true strains between 0.1 and 0.2 was modeled. Transients involving lowered work-hardening rates (negative value of An) promoted increased strain localization and premature failure while transients with increased work-hardening rates enhanced formability. Total engineering elongations (50 mm gage length) varied between 20 pct and 46 pct, illustrating the importance of the transient far beyond the transient region. The controlling factor is the effective work-hardening rate in the transient region rather than the change in strength coefficient or flow stressper se. A direct stress offset of the flow curve { } also affects strain localization through a change in effective work-hardening rate.