Volatile Compounds of Raw Beef from 5 Local Spanish Cattle Breeds Stored Under Modified Atmosphere

Volatile compounds of raw beef from Asturiana de los Valles, Morucha, Parda Alpina, Pirenaica, and Retinta cattle breeds were studied. Steaks were packaged under 60% O₂, 30% CO₂, and 10% N₂, and 53 volatile compounds were tentatively identified by purge‐and‐trap extraction and gas chromatography with mass spectrometry after 0, 5, 10, and 15 d of chill storage. The degradation of beef quality with increasing storage time was evidenced by the increase in 2,3,3‐trimethylpentane, 2,2,5‐trimethylhexane, 3‐octene, 3‐methyl‐2‐heptene, 2‐octene, and 2‐propanone and by the decrease in dimethyl sulfide. Consequently, some of the volatile compounds, which are believed to be formed by thermal degradation of meat, might be formed during chill storage, and the rate of formation of some was dependent on the specific compound.     

Equal-channel angular extrusion of beryllium

The equal-channel angular extrusion (ECAE) technique has been applied to a powder metallurgy (P/M) source Be alloy. Extrusions have been successfully completed on Ni-canned billets of Be at approximately 425°C. No cracking was observed in the billets, and significant grain refinement was achieved. In this article, microstructural features and dislocation structures are discussed for a singlepass extrusion, including evidence of <c> and <c+a> dislocations. Significant crystallographic texture developed during ECAE, which is discussed in terms of this unique deformation processing technique and the underlying physical processes which sustain the deformation. S.R. AGNEW, formerly with the Oak Ridge National Laboratory, Oak Ridge, TN 37831-6115 This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

370 W output power GaN-FET amplifier for W-CDMA cellular base stations

A single-ended amplifier using small packaged GaN-FETs exhibits a record 2.14 GHz W-CDMA output power. The amplifier, composed of paralleled 48 mm gate periphery FET die, delivers a peak saturated output power of 371 W with a linear gain of 11.2 dB at a drain voltage of 45 V under 2.14 GHz 3GPP W-CDMA signal input. The output power density (output power/package size) of 1.1 W/mm/sup 2/ is twice as high as that of the existing over 300 W GaAs-FET amplifiers. A low 5 MHz offset ACLR of -36 dBc with a drain efficiency of 24% is also obtained at 8 dB power back off from the saturated output power.     

Reliability Potential Of Epoxy Based Encapsulants For Automotive Applications

Automotive under-the-hood electronics often have to withstand temperatures up to 175 °C in combination with harsh environment conditions. This paper gives an overview about the reliability potential of epoxy based encapsulants for automotive applications. Therefore the resistance of epoxy molding compound against typical automotive fluids at temperature of use is analyzed. Six epoxy molding compounds available on the market, showing high temperature automotive potential have been carefully selected to undergo a media resistance testing. For this purpose a dedicated mold tool has been designed and manufactured to prepare these encapsulants for material testing. Thermo-mechanical, mechanical and thermal properties had been determined in initial state directly after molding and after storage in aggressive fluids typical for automotive applications as e.g. gas oil, automatic transmission fluid (ATF), brake fluid or accumulator acid at the respective temperature of use.     

Determination of the relative amounts of free and complexed manganese ions in aqueous solution by nuclear magnetic resonance.

The ratio of the transverse relaxation rate to the longitudinal relaxation rate of water protons (T1/T2) at 90 MHz can be used to determine the relative amounts of free Mn2+ ions (the hexaquo ion) and chelated manganese ions when both species are present in the same aqueous solution. This technique is demonstrated for simple aqueous solutions containing known concentrations of both the free Mn2+ ion and a manganese(III) porphyrin. The accuracy of the method is found to be +/- 7.3% for the solutions considered in this report. The determinations of the relative amounts of the free Mn2+ ion and the manganese(III) porphyrin by this T1/T2 method are shown to agree well with those determined by nuclear magnetic resonance dispersion profiles. The theoretical basis of this ratio method as well as the scope and limitations in its application to aqueous solutions containing both free Mn2+ ions and chelated manganese species other than manganese(III) porphyrins are also discussed. This work demonstrates a unique use of NMR as a means for the quantitative analysis of manganese in which the effects of the metal ion on the solvent, and not the metal itself, are observed.     

High-resolution electron microscopy of the twinning and intergrowth in Ca4Al6SO16 and Ca3SrAl6SO16

The microstructures of unhydrated calcium aluminosulphate Ca₄Al₆SO₁₆ and Ca₃SrAl₆SO₁₆ have been studied by high-resolution electron microscopy (HREM). The results showed that twinning and twinned slabs could be introduced taking the [1 1 2] direction as the twin axis so that it seems to be coincident with the law of twinning formed in body-centred cubic structures. A previously reported superlattice with a repeat period twice that of the fundamental structure along the 〈1 1 0〉 direction has also been found in both matrix and twin variants. The close intergrowth of Ca₃SrAl₆SO₁₆ and another phase, possibly Sr₃Al₂O₆ existing as an inclusion between these two twin variants, was determined and clearly revealed by electron diffraction and HREM images. The coherent interphase boundaries and orientation relationship between them can also be deduced.     

Dyadic-based factorizations for regular paraunitary filterbanks and M-band orthogonal wavelets with structural vanishing moments

Paraunitary filterbanks (PUFBs) can be designed and implemented using either degree-one or order-one dyadic-based factorization. This work discusses how regularity of a desired degree is structurally imposed on such factorizations for any number of channels M /spl ges/ 2, without necessarily constraining the phase responses. The regular linear-phase PUFBs become a special case under the proposed framework. We show that the regularity conditions are conveniently expressed in terms of recently reported M-channel lifting structures, which allow for fast, reversible, and possibly multiplierless implementations in addition to improved design efficiency, as suggested by numerical experience. M-band orthonormal wavelets with structural vanishing moments are obtained by iterating the resulting regular PUFBs on the lowpass channel. Design examples are presented and evaluated using a transform-based image coder, and they are found to outperform previously reported designs.