Switched-capacitor integrators with low finite-gain sensitivity

Compensated SC integrator stages are analysed and compared with respect to their sensitivities to finite amplifier gain effects. Simple single-stage amplifiers may be used in such circuits even in highly selective filtering applications. This may allow an extension of the present frequency range of SC circuits.     

Quality of the surface of strip annealed in bell-type furnaces

Institute of Ferrous Metallurgy. Novolipetsk Metallurgical Combine. Translated from Metallurg, No. 11, pp. 32–33, November, 1989.     

OTDM transmitter using WDM-TDM conversion with an electroabsorptionwavelength converter

An all-optical multiplexing technique using wavelength division multiplexing (WDM)-time division multiplexing (TDM) conversion with an electroabsorption wavelength converter has been proposed and demonstrated. The effectiveness of this WDM-TDM conversion technique for various pulsewidth settings was experimentally investigated. The fluctuation of the signal performance, which was inevitably caused by the coherent crosstalk between adjacent pulses in the conventional optical time division multiplexing (OTDM) technique, were successfully suppressed, even in the case of wide pulse duration. High Q-factor performance has been maintained for a wide range of duty ration from 36% to 74%. By introducing this technique to the optical time division multiplexer, a highly stable and high-quality 40-Gb/s optical signal can be effectively produced without generating the short pulse or setting two tributaries at orthogonal polarization states, and without introducing high-speed electronics for signal multiplexing. The WDM-TDM conversion with an electroabsorption wavelength converter was extended to 60-Gb/s operation by using three 20-Gb/s tributaries. A clear eye opening was confirmed for a waveform after the WDM-TDM conversion of the 60-Gb/s signal     

Quantitative prediction of the degree of pollution of effluent from reactive dye mixtures

By using mathematical formulae developed in previous studies, certain pollution parameters of dye effluent obtained from reactive dyeing with a single dye can be predicted with good accuracy. In this study, the degree of pollution of reactive dyeing effluent using dye mixtures was also predicted by other approaches, such as linear and non-linear regression. The prediction accuracy was found to be satisfactory.     

Microwave Communication to Moving Parts Inside Machines

Cables to moving parts on a linear actuator in production machines, such as pick-and-place machines, are a source of unreliability owing to the possible breaking of a cable. They further reduce the positioning precision of the actuator owing to additional forces. Slotted waveguide systems for rail vehicles based on 2.4 GHz transmission frequency are well known, but transmitters/receivers and waveguides are bulky. The paper reports on the reduction in size of the equipment, adapted to 5.8 GHz using a commercial off-the-shelf RadioLan communication module. Further, the efficient termination of the wave-guide and a new way to reduce standing-wave effects is also discussed.     

Binding free energy calculations of galectin-3-ligand interactions

Galectins show remarkable binding specificity towards ß-galactosides.A recently developed method for calculating binding free energiesbetween a protein and its substrates has been used to evaluatethe binding specificity of galectin-3. Five disaccharides anda tetrasaccharide were used as the substrates. The calculatedbinding free energies agree quite well with the experimentaldata and the ranking of binding affinities is well reproduced.For all the six protein–ligand complexes it was observedthat electrostatic interactions oppose binding whereas the non-polarcontributions drive complex formation. The observed bindingspecificity of galectin-3 for galactosides rather than glucosidesis discussed in light of our results.     

Chemical leaching and magnetic properties of non-equilibrium Al(Co–Cu) powders produced by rod milling

We report upon the chemical leaching and magnetic properties of nanoscale crystalline Al_0.6(Co₂₅Cu₇₅)_0.4 alloy powders produced by rod milling. X-Ray diffractometry (XRD), transmission electron microscopy, differential scanning calorimetry, vibrating sample magnetometry, and superconducting quantum interference device magnetometry were used to characterize the as-milled and leached specimens. After 400 h of milling, only the b.c.c. phase of the intermetallic compound γ-Al_3.892Cu_6.10808 was detected by XRD. After annealing the leached specimen at 600 °C for 1 h, the nanoscale crystalline phase was transformed into the f.c.c. Cu phase, and this was accompanied by a change in the magnetic properties. The peaks of the magnetization shifted towards lower temperature with increasing external field. The temperature behavior at T_f (45 K) for direct current (d.c.) magnetic susceptibility measurements was quite different for field cooling and zero-field cooling. After cooling the leached specimen from 800 °C, magnetization increased gradually.     

Modeling of Calcium Chloride and Pectin Methylesterase Prefreezing Treatments of Strawberries and Jams

ABSTRACT: :
Different calcium chloride (CaCl₂) and pectin methylesterase (PME) prefreezing treatments in a vacuum were used to clarify the most effective prefreezing factors for strawberries and traditional jams. Fractional factorial design and modeling were used. CaCl₂ had the greatest effect on the majority of the 15 studied responses ( p < 0.001). The pretreatment time should be short (about 5 to 10 min), the temperature low (less than 20 °C), the vacuum level high (pressure less than 10 kPa), the CaCl₂ concentration moderate (about 1%) and the dosage of PME comparatively low (about 50 to 100 nkat/g) in order to yield high quality frozen strawberries for jam making.