Determination of precompression and compression force levels to minimize tablet friability using simplex

Pilot simplex experiments for improving the tablet strength of three aspirin tablet formulations based on precompression and compression forces were presented. As each simplex moved towards the direction of the optimum, the friability was being minimized and the crushing strength was concomittantly being maximized. Because it followed a systematic direction, simplex process would locate a local optimum rapidly. The appropriate levels of precompression and compression forces that produced tablets with the desired strength were attained in five trials. By contrast, random search for this force combination required at least ten trials. Simplex technique is a cost and time effective means for determining the precompression and compression forces that will reduce the friability or increase the hardness of a tablet formulation. Results appeared to also indicate that crushing strength might be a more reliable measure of tablet strength than friability.     

Criteria for evaluation of the hardening factor of machine parts

V. Ya. Chubar' Zaporozhe Machine Building Institute. Translated from Problemy Prochnosti, No. 3, pp. 62–65, March, 1989.     

Strength of small-scale spherical shells formed from pressed glass elements

Institute of Strength Problems, Academy of Sciences of the Ukrainian SSR, Kiev. Sumy Branch, Khar'kov Polytechnic Institute. Translated from Problemy Prochnosti, No. 8, pp. 102–104, August, 1989.     

On body-fitted co-ordinates for separated laminar flows past wall-mounted obstacles

A body-fitted curvilinear co-ordinate system is used to solve the equations of two-dimensional incompressible laminar flow over bluff obstructions by finite differences. Arbitrary conditions at the corner are removed by this method. Results for a backward-facing step are in reasonable agreement with those obtained with conventional mesh systems, and the differences are explained. A treatment of a channel expansion, in comparison with empirical data, is also included. The capability of the present method to handle arbitrary two-dimensional geometries is stressed and demonstrated, using a triangle and a semi-circle as examples.     

Dynamic viscosities of mixtures of n-butyraldehyde and isobutyraldehyde over wide ranges in the state parameters

Dynamic-viscosity measurements are reported for liquid mixtures in the system formed by n-butyraldehyde and isobutyraldehyde.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 48, No. 2, pp. 321–322, February, 1985.     

Studies on structural,dielectric and electrical properties of Dy<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Bi<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>FeO<Subscript>3</Subscript> solid solutions

The polycrystalline samples of Dy _x Bi_1−x FeO₃ (x = 1, 0.8, 0.6, 0.4 and 0.2) were synthesized by standard solid state reaction technique. The samples synthesized were characterized by X-ray diffraction (XRD) technique. Further the samples were characterized by infrared (IR) spectroscopic technique. The dielectric measurements were carried out as a function of frequency in the range 100 Hz to 1 MHz at room temperature. Also the dielectric measurements were carried out as a function of temperature at certain fixed frequencies. The ac and dc resistivity measurements were carried out using two probe method. Also temperature dependence of ac and dc resistivity was noted. These measurements suggest polaron conduction in the samples. Finally, the data from XRD, IR, dielectric measurements were correlated.     

Dissolution processes,hydrolysis and condensation reactions during geopolymer synthesis: Part I—Low Si/Al ratio systems

Initial geopolymeric reaction processes governing dissolution of solid aluminosilicate particles in alkali solutions have been investigated using conventional experimental techniques, and the data analysed by speciation predictions of the partial charge model (PCM). For metakaolin powders activated with 5.0 M NaOH, solid-state nuclear magnetic resonance (NMR) spectra disclose the existence of monomeric [Al(OH)₄]⁻ species after two hours of dissolution, consistent with PCM predictions. However, no equivalent monomeric silicate species were observed for 5.0–10.0 M NaOH activator solutions characteristic of systems with nominal Si/Al ≤ 1. The apparent absence of monomeric silicate species suggest rapid condensation of silicate units with [Al(OH)₄]⁻ to generate aluminosilicate species, as indicated by the evolution of the shoulder at around −87 ppm in the ²⁹Si NMR spectra. Of the two possible stable silicate species [SiO₂(OH)₂]²⁻ and [SiO(OH)₃]⁻, the latter appears most likely to condense with [Al(OH)₄]⁻ to produce aluminosilicate oligomers, from which larger oligomers subsequently form through further condensation with [Al(OH)₄]⁻ leading to a gradual build up of aluminosilicate networks and a lowering of system alkalinity. This dissolution and hydrolysis sequence at the early stages of synthesis suggests a reaction path wholly consistent with predictions of the partial charge model.     

Point Contact Spectroscopy and Temperature Dependence of Resistivity of Metallic Sodium Tungsten Bronzes - Role of Optical Phonons

In this paper we report the results of electrical resistivity (1.5≤ T ≤ 300K) and point contact spectroscopy (PCS) measurements on single crystals of metallic sodium tungsten bronze with varying sodium content. We have shown that the electron-phonon coupling function as measured through PCS can explain quantitatively the large temperature dependence of resistivity ρ seen in these materials over the entire temperature range. The electron-phonon coupling function shows predominately large peaks for phonon frequency range of 30 meV ≤ ω ≤ 100 meV which match well with the calculated optical phonons for WO₆ octahedron. The integrated electron-phonon coupling constant λ from this data is ≈ 0.25-0.45, depending on the Na content. PACS numbers: 72.15.-v, 72.80.Ga