High-strain-rate superplasticity of nanocrystalline aluminum alloy 1570

The structure and mechanical properties of nanocrystalline aluminum alloy 1570 obtained by means of severe plastic deformation have been studied. Being tested in a temperature range from 300 to 400°C, the alloy exhibits high-strain-rate superplasticity. At 400°C, the superplasticity is manifested in a very broad range of strain rates, extending from 5 × 10^?3 to 1 s^?1.     

Studying chaotic microwave oscillations in a TWO with depressed collector

Broadband chaotic oscillations were monitored in a depressed potential collector of a traveling-wave oscillator (TWO). This signal appears due to the oscillations of a virtual cathode, which is formed in the spent electron beam under the action of retarding fields existing in the multistage depressed collector.     

Optical properties of strain-compensated InAs/InGaAsN/GaAsN superlattices

The optical properties of heterostructures comprising InAs/InGaAsN quantum wells in strain-compensated GaAsN/InGaAsN superlattices have been studied. It is demonstrated that, using such superlattices of various design and thickness and with additional InAs monolayer spacers, it is possible to control the wavelength of room-temperature emission from InGaAsN quantum wells within 1.3–1.6 μm without deteriorating the output radiation characteristics, which opens additional prospects for the development of lasers on GaAs substrates for telecommunication applications.     

Increasing the efficiency of metal-air current sources operating in a pulse-train mode

A considerable (～1.4-fold) increase in the average output power of a chemical current source has been achieved by means of a periodic pulsed manipulation of the load. A scheme used for the pulse-train loading is presented and mechanisms ensuring an increase in the average output power of the current source are considered.     

Properties of gasars-metallic materials with pores formed by released hydrogen

We developed a new type of porous materials with anisotropic structure based on a large number of metals. It is shown that these material, called gasars, have properties different from the properties of the other porous materials. Thus, the strength of gasars is much higher than the strength of powder materials with the same porosity and their impact toughness is readily regulated by the sizes of the pores. The internal structures of gasars and possible versions of the types of pores in these materials are strongly diversified, which makes the spectrum of their possible applications very wide. We discuss some specific directions of the potential applications of gasars. The results of measurements of the thermal conductivity of gasars and monolithic specimens are presented. It is shown that, for a certain level of porosity, the specific thermal conductivity of gasars is higher than for monolithic materials. We also make some basic conclusions concerning the characteristics of new porous materials. __________ Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 5, pp. 125–127, September–October, 2007.     

Converting harmonic oscillations into chaos

A new simple model of a system with chaotic dynamics, based on the equations of bistable systems, is considered. The possibility of converting harmonic signals into chaotic oscillations, which represent intermittent irregular and switching quasi-regular motions, is demonstrated by numerical methods. The mechanism of chaotization is analyzed using the results of numerical calculations.     

Workplane illuminance prediction method for daylighting control systems

A new prediction method with an interior light sensor for the workplane illuminance in daylighting control systems is introduced. Based on radiosity theory, the spatial distributions of daylight and electric light in the space are discussed and the prediction method is developed. An experimental verification of the technique is performed in an outdoor test-room for a double-glazed window system with a motorized venetian blind integrated between the two glazings. Electric light and daylight predictions were performed in accordance with the proposed method. The results showed that the electric light workplane illuminance can be predicted with high accuracy (±5 lux error with a linear correlation) and that the daylight workplane illuminance can be predicted within ±20 lux (with a linear correlation) for any sky conditions (overcast, clear sky, or variable) with the window system controlled to prevent direct daylight transmission. This method is useful for integrated control of motorized daylighting devices and dimmable electric lights.     

The structure and thermo EMF of a nanotubular carbon deposit formed in electric discharge plasma

We have studied the structure and thermo emf of a nanotubular carbon deposit formed in electric arc discharge plasma. The deposit contains flocky granules with dimensions of 15–20 μm within a 20–60 μm-thick layer on the substrate surface. This deposit is characterized by a sufficiently high thermo emf (60 μV/K) and electric conductivity (600 Ω⁻¹ m⁻¹).     

Results of benchmark calculations based on OLHF-1 test

The subject of this paper is to compare the results of the different calculations performed by the benchmark participants in the framework of the OECD Lower Head Failure (OLHF) program. The benchmark consists in the finite element (FE) calculation or in analytical calculations of the mechanical behavior of the OLHF-1 experiment. Seven participants from six countries and seven companies or organizations (AVN, VTT, GRS, UJV, SNL, IPSN and CEA) have performed the benchmark.The OLHF experiment program extends the NRC-sponsored SNL LHF program (NUREG/CR-5582) completed in 1998: these experiments where intended to simulate the thermal/mechanical loads to a 1/4.85-scale model of a reactor pressure vessel. The pressure vessel material (SA533B1 steel) used in these experiments is prototypic of reactor PWR vessel material and has been well characterized by material property testing as part of this program. The OLHF tests advance the results of the previous testing program by examining the effects of large temperature differences across the vessel wall. Large temperature differences in excess of 150–400 K are more prototypic of accident conditions.Most of the participants performed 2-D axisymmetric analyses and doesn’t study the crack opening. The global mechanical behaviour of OLHF-1 experiment is well represented but prediction of the maximum vertical displacement is not in good agreement with the experimental value. Failure time and location are in quite good agreement with experimental results but large discrepancies are observed on the mode of failure: creep or plasticity. To improve predictions, more investigation and work is needed on the choice of the failure criteria and failure mode.     

A personal computer based system used in electromyography for interpretation and reporting

Programs for rule based electromyography (EMG) interpretation and reporting are described. A number of parameters are obtained during an EMG investigation. The combination of these data leads to a neurophysiological conclusion. Knowledge from the literature, research and experience is the basis for rule development. Rules have been developed for 14 of the most commonly used classifications of an EMG. The syntax is relatively easy and the user may change the rules, add rules or apply the system for other types of data. The results are displayed in a new graphical way. The system presented here is part of an integrated EMG laboratory with administrative routines, distributed databases for storage of results and routines for automatic report generation.