Electrical properties of UV photochemically treated CdTe

Single crystal CdTe was grown using the vapour phase technique. The dice were etched using a photochemical method in which the samples were illuminated during the etching process. Laser pulses of various intensities were used as an illumination source during the etching of the CdTe substrate. A pulse excimer laser capable of producing 17 ns pulses of 308 nm wavelength with varuing intensities between 0–35 mW cm⁻² was used. Schottky barriers were made by vacuum evaporation of gold onto the CdTe single crystal substrate. The behaviour of the Au---CdTe devices was studied as a function of the intensity of the laser beam used during the etching of CdTe substrate by principle electrical methods such as capacitance-voltage and current-voltage analysis. The photochemical technique was found to produce a significant change in the electrical properties, such as the barrier height, carrier concentration, ideality factor, and forward-bias threshold of the Au---CdTe Schottky diode.     

Lead acid battery storage configurations for improved availablecapacity

Battery storage is a crucial element in alternative energy and electric vehicle systems. Three battery storage configurations: a conventional; a parallel; and a dual, were analyzed for both shallow cycle and deep cycle lead-acid batteries to determine if capacity improvement is achievable. Daily profiles for the weekly irradiance, daily loads, and ambient temperature are simulated. Cycle tests were performed monthly to determine the effect each configuration had on the available battery capacity. Results for each battery type differ. Available capacity was improved using the parallel configuration with shallow cycle batteries and the dual configuration with deep cycle batteries     

Soft X-ray image storage in poly (methylmethacrylate)

Images stored in resist for soft X-ray lithography or microradiography were found to show a background noise which limits the resolution. This is due to the statistically variable spatial distribution of the photons incident on the resist surface. An estimate of the fundamental noise-limited resolution has been made from the experimental measurement of photon flux incident on the surface and the accurate development rate curves. Monochromatic radiation from a synchrotron source was used.     

A.c. conductivity studies on the silver molybdo-arsenate glassy system

A new quaternary fast-ion conducting silver molybdo-arsenate [Agl-Ag₂O-(MoO₃ + As₂O₅)] (SMA) glassy system has been prepared using the melt-quenching technique for various dopant salt (Agl) concentrations by fixing the formers (MoO₃ + As₂O₅) composition and the modifier (Ag₂O) to formers (M/F) ratio. The prepared compounds were characterized by X-ray diffraction. The impedance measurements were made on different Agl compositions of the SMA glasses as a function of frequency (6.5 Hz–65 kHz) and temperature (303–343 K), using the Solatron frequency-response analyser (model 1250). The bulk conductivity and the appropriate physical model (equivalent circuit) of the SMA glass were obtained from the impedance analysis. The a.c. conductivity was calculated for different Agl compositions of SMA glasses at various temperatures and the obtained a.c. conductivity results were analysed using Jonscher's Universal Law. The conduction mechanism for the highest conducting SMA glassy compound has been explained using the diffusion path model.     

A 16-Kbit Θ-search associative memory

The design of a high-capacity Θ-search associative memory (Θ∈{<,>,⩽,⩾,=≠}) is presented. PSPICE simulation and layouts show that the proposed Θ-search associative memory chip consisting of 256 words, each 64-b long, can fit on a 13.5-mm×9.5-mm chip. It can perform maskable Θ-search operations over its contents in 110 ns     

Extending typestate checking using conditional liveness analysis

The authors present a practical extension to typestate checking, which is capable of proving programs free of uninitialized variable errors even when these programs contain conditionally initialized variables where the initialization of a variable depends upon the equality of one or more tag variables to a constant. The user need not predeclare the relationship between a conditionally initialized variable and its tags, and this relationship may change from one point in the program to another. The technique generalizes liveness analysis to conditional liveness analysis. Like typestate checking, this technique incorporates a dataflow analysis algorithm in which each point in a program is labeled with a lattice point describing statically tracked information, including the initialization of variables. The labeling is then used to check for programming errors such as referencing a variable which may be uninitialized     

Application of microwaves and millimeter waves for thecharacterization of teeth for dental diagnosis and treatment

This paper presents applications of microwaves and millimeter waves for the characterization of teeth. This is done by measuring the complex permittivity over the frequency range from 0.04 to 40 GHz. These measurements have revealed that dental caries are significantly more lossy to microwaves and millimeter waves than the healthy tooth, and this difference can be used for dental diagnosis. The experimental results have been confirmed by using the finite-difference time-domain (FDTD) method. In addition, millimeter-wave heating of the lossy dental caries can be used as a sterilization treatment. It is concluded that millimeter waves can be used for dental medical diagnosis as well as dental medical treatment     

Dynamic digital holographic wavelength filtering

This paper describes the theory and results of a new generic technology for use in optical telecommunications and wavelength division multiplexing (WDM): dynamic digital holographic wavelength filtering. The enabling component is a polarization-insensitive ferroelectric liquid crystal (FLC) spatial light modulator (SLM) in conjunction with a highly wavelength-dispersive fixed diffractive element. The technology has been used to perform demultiplexing of single or multiple WDM signals, dynamic erbium doped fiber amplifier (EDFA) gain equalization and channel management, and used to tune an erbium-doped fiber laser (EDFL) functioning as a high power, very narrow linewidth WDM source