Studies on the synthesis of SAPO-5

Silicoaluminophosphate (SAPO-5) molecular sieves have been synthesised from reaction mixtures having a molar composition of: 0.7–1.0 Al₂O₃:0.7–1.0 P₂O₅:0.01–2.0 SiO₂:xR:40 H₂O (where R = (C₂H₃)₃N or (C₂H₃)₄NOH and x = 1.5–2.5 for (C₂H₅)⁵N and 0.5 for (C₂H₅)₄NOH, at 473 K using various sources of alumina and silica. The effects of (i) varying the crystallinity of the alumina source (boehmite) and (ii) the use of different silica sources such as freshly prepared silica either from sodium silicate or paddy husk extract, silica gel from commercial water-glass, and tetraethyl orthosilicate have been studied. The crystallinity of boehmite has been found to have a strong effect on its reactivity towards the formation of SAPO-5. The activity of boehmite for SAPO-5 formation increased with a decrease in its crystallinity (or with increase in its moisture content). Any silica source devoid of sodium ions could be employed for the synthesis of SAPO-5. The process of crystallisation started as early as within 1.5 h of reaction and incorporation of silicon into the AlPO₄ framework has been noted at this stage. Formation of some tridymite phase as impurity has been observed under conditions such as (i) SiO₂ concentration > 1.7 mole and (ii) x > 2.0 when R = (C²H₅)₃N.     

Reactor modelling for electrochemical processes

This paper presents a relatively straightforward approach to the modelling of electrochemical reactors operated in batch or continuous modes. The models are based on ideal flow assumptions of either well-mixed or plug flow and incorporate reaction rate models based on electrochemical kinetics and mass transport at one electrode. General characteristics of the reactor models are described, particularly with regard to the need for good mass transport in metal recovery applications. An example is given on the use of the model in the recovery of a heavy metal (Cd²⁺) from an acidified solution containing Cd(II) and Fe(III) ions. The reaction rate model is based on experimental data.     

IMPROVING THE QUALITY OF TIMBER FROM RED BEECH (N. FOSCA) BY INTERMITTENT DRYING

The effect of cycling the external conditions on the timber quality and drying time during seasoning has been studied for red beech (Nothofagus fusca), a difficult-to-dry New Zealand hardwood, inalaboratorybatchdryer. Intermittent drying at anair temperature of 45°C and a wet-bulb depression of 10°C takes longer to yield a given moisture content than continuous drying under the same conditions, but produces timber without honeycomb or severe case-hardening as observed in continuous drying. The experiments also indicate that the timber can tolerate a higher air temperature (55°C) in intermittent drying at the same wet-bulb depression with less case-hardening and without showing honeycomb compared with continuous drying at 45°C, having a similar total drying time. Intermittent drying at a slightly higher dry-bulb temperature (60°C) and a much higher wet-bulb depression (18°C) gives a similar degree of case-hardening to that found in samples dried continuously at a dry-bulb temperature of 45°C.     

Nitrogen plasma source ion implantation of AISI S1 tool steel

Significant economic savings can be achieved by improving the wear lifetime of precision manufacturing tools through nitrogen-ion implantation. This near-ambient temperature, surface modification process preserves dimensional integrity and surface finish while eliminating delamination problems that are often associated with overlay coatings. Conventional ion implantation is a line-of-sight process which requires elaborate manipulation and masking to uniformly implant components of complex shapes. A recently developed process, plasma source ion implantation (PSII), circumvents this line-of-sight restriction and makes ion implantation more attractive economically. In this article, the effects of PSII of nitrogen at a target bias of 50 kV, to a dose of 0.3 × 10¹⁸ atoms/cm² on the surface microstructure and mechanicalproperties of AISI S1 tool steel are presented.     

Unexpected relations between matrix elements of the three-body scalar operators ti in the f shell

It has been known for some time that crystal-field matrix elements (i.e., matrix elements of sums over spherical harmonics involving the coordinates of the individual electrons) are often unexpectedly proportional to one another in the f shell. To see whether similar relations hold for more complicated operators than those provided by the crystal field, we examined the matrix elements of the three-electron scalar operators t_i for all configurations f^N, as calculated by W. T. Carnall on the basis of the computer program of Hannah Crosswhite. These operators are widely used to take configuration interaction into account, and we found a surprising number of proportionalities that go beyond what would be expected on a straightforward application of the Wigner-Eckart theorem, as applied to the irreducible representations of the classic groups SO(7), G₂ and SO(3) used by Racah in defining the f-electron states. A listing of such relations is provided.     

Surface electronic structure of rare earth metals

Angle-resolved UV photoemission has been used to investigate the electronic structure of the (0001) surfaces of scandium, yttrium, praseodymium and gadolinium. Off-normal emission spectra were recorded with high angular resolution, enabling detailed mapping of the dispersion of valence band features. Yttrium and gadolinium show similar results to published data from Ho(0001), suggesting minimal 4f influence in the lanthanide bandstructures. Differences seen on praseodymium and scandium may be due to 4f derived states and surface states respectively.