Properties of p- and n-Type PbTe Microwires for Thermoelectric Devices

In thermopower measurements, microwires fabricated from as-purchased bulk PbTe exhibits p-type behavior between room temperature and ～600 K. At higher temperatures, it undergoes majority carrier inversion and exhibits n-type behavior. We report on the preparation and properties of potassium oxide and Zn-doped PbTe microwires, which exhibit stable p- and n-type behavior, respectively, between room temperature and 725 K. Thermoelectric figures of merit (ZT) are reported for device components prepared from bundles of such p- and n-type microwires in a glass matrix.     

Influence of Glass Content on Damping Properties of Plasma-Sprayed Mixtures of Zirconia and Glass

The addition by vacuum infiltration of small quantities of a polymer has been found to increase significantly the ability of a plasma-sprayed coating to dissipate vibratory energy at temperatures in the glassy-rubbery transition range of the polymer. As vitreous enamels and glasses undergo a glassy transition, but at much higher temperatures, the addition of a small amount of glass to a ceramic has the potential of providing high damping at such temperatures. Mixtures of yttria-stabilized zirconia (YSZ) and a glass frit were plasma sprayed on specimens with bond coats. Measures of system response (resonant frequencies and loss factors) were extracted from frequency responses to excitations of cantilever beam specimens over a range of excitation amplitudes. Comparisons of values determined before and after coating were used to determine the damping properties of the coatings alone as functions of strain, at temperatures of special interest. Emphasis was given to identifying the lowest level of glass giving significantly more damping than that of the plasma-sprayed ceramic alone. Coatings with weight fractions of 5, 2, 1, ?, and 0% glass were tested. The inclusion of glass at all weight fractions considered was found to yield significant increases in both the stiffness and dissipation of the coatings.     

Maternal mental health and integrated programs for mothers with substance abuse issues.

To examine the impact of integrated treatment programs (those with substance use treatment and pregnancy-, parenting-, or child-related services) on maternal mental health, we compiled a database of studies of integrated programs published between 1990 and 2007 with outcome data on maternal mental health. There were 18 cohort studies, 3 randomized trials, and 2 quasi-experimental studies. Of the five studies comparing integrated to nonintegrated programs, three studies provided enough information to allow for them to be combined in a meta-analysis. The average effect size was 0.23 (95% CI = 0.15 to 0.31, SE = 0.04), p Q = 5.66, p = .059. This meta-analysis is the first systematic quantitative review of studies evaluating the impact of integrated programs on maternal mental health. Findings suggest that integrated programs may be associated with a small advantage over nonintegrated programs in improving maternal mental health. This review highlights the need for further research with improved methodology, study quality, and reporting to improve our understanding of how best to meet the mental health needs of mothers with substance abuse issues. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

“Virtual Design Studio”—Part 1: Interdisciplinary design processes

The “Virtual Design Studio (VDS)” is a software platform currently under development in support of an integrated, coordinated and optimized design of buildings and their energy and environmental systems. It is intended to assist collaborating architects, engineers and project management team members throughout from the early phases to the detailed building design development. The platform helps to facilitate the workflow and the processing of information in combination with appropriate, task-based performance simulation tools as further analyzed in Part 2 of this study (DOI: 10.1007/s12273-013-0111-1). The present paper summarizes how VDS relates to the building design process and its typical project stages, performance-based design considerations and respective performance optimization strategies. It outlines the methodology and scope for the organization, implementation and respective requirements for the VDS platform development based on the interdisciplinary design needs. Part 2 will present the methodology for the systems integration and software implementation of VDS.     

Nonlinear behavior of linear low-density polyethylene

To predict the response of polyethylene thin films subjected to stress for a long time, it is necessary to understand the influence of stress on either the relaxation modulus or creep compliance. Extensive testing has been conducted on 20-micron-thick samples of a particular linear low-density polyethylene film at temperatures from 23°C to −50°C. When reduced to creep compliance and compared with results from dynamic mechanical analysis (DMA), the influence of nonlinearities in the response function is apparent. However, the use of a two-step loading procedure has produced sufficient data to discriminate between the effect of stress on amplitude and time on the creep compliance. It has been found that a master curve of compliance generated by DMA equipment may be used in conjunction with certain nonlinear functions to accurately predict the response of the polyethylene. Perhaps of more importance is the observation that the principles of simple time-temperature superposition, commonly used with linear viscoelastic characterization, are insufficient for use with polyethylene films at most stress levels of interest.     

Partitioning and bioaccumulation of PBDEs and PCBs in Lake Michigan

Water from Lake Michigan and fish from all five Great Lakes have been sampled and analyzed for a suite of six polybrominated diphenyl ether (PBDE) congeners and 110 polychlorinated biphenyl congeners (PCBs). The Lake Michigan dissolved phase PBDE congener concentrations (0.2 to 10 pg/L) are similar to dissolved phase PCB congener concentrations (nondetected to 13 pg/L). Partitioning of PBDEs between the particulate and dissolved phases exhibits behavior similar to that of PCBs. Organic-carbon-normalized water-particle partition coefficients (log K(OC)s) ranged from 6.2 to 6.5. Lake trout are depleted in BDE-99 relative to dissolved phase concentrations, and in contrast to what is expected from the PCB congener patterns. This reflects suspected debromination of BDE-99 in the food web of Lake Michigan. A regression of the log of the bioaccumulation factor (BAF) and the log of the octanol-water partition coefficent (K(OW)) indicated a positive relationship for both PCB congeners and PBDE congeners. BDE-99 does not appear to followthe same trend, a further indication that it is subject to biotransformation. Using the PBDE BAFs for Lake Michigan and the PBDE fish concentrations from the other Great Lakes it is expected that the dissolved phase concentrations of congeners in the other lakes would range from 0.04 to approximately 3 pg/L.     

Effect of growth temperature on the positional distribution of eicosapentaenoic acid andrans hexadecenoic acid in the phospholipids of aVibrio species of bacterium

Phosphatidylethanolamine (PE) and phosphatidylglycerol (PG) were isolated from aVibrio species of bacterium, known to produce eicosapentaenoic acid (20∶5n−3) andtrans-hexadecenoic acid (16∶1n−7), and subjected to phospholipase A₂ degradation to determine the positional distribution of component fatty acids. At the two growth temperatures studied (20 and 5°C), both 20∶5n−3 andtrans 16∶1 n−7 were located mainly at positionsn−2 in PE. Increases in the proportions of 20∶5n−3 andtrans 16∶1n−7 in positionsn−2 with decreasing growth temperature were balanced mainly by decreases in the level ofiso-15∶0. In PG,trans 16∶1n−7 was located predominantly in positionsn-1, although the difference between the two positions was not as great as in PE. Eicosapentaenoic acid was preferentially located in positionsn-2 of PG, particularly at 5°C when it comprised 29.9% of the total fatty acids in this position. It is concluded thattrans 16∶1n−7/20∶5n−3 is not a major molecular species of phospholipid in this species ofVibrio and that changes in the levels of molecular species of PE containingiso-15∶0 may feature in thermal acclimation.     

Replacement of dietary fish oil with increasing levels of linseed oil: Modification of flesh fatty acid compositions in Atlantic salmon (<Emphasis Type="Italic">Salmo salar</Emphasis>) using a fish oil finishing diet

Five groups of salmon, of initial mean weight 127±3 g, were fed increasing levels of dietary linseed oil (LO) in a regression design. The control diet contained capelin oil (FO) only, and the same oil was blended with LO to provide the experimental diets. After an initial period of 40 wk, all groups were switched to a finishing diet containing only FO for a further 24 wk. Growth and flesh lipid contents were not affected by dietary treatment. The FA compositions of flesh total lipids were linearly correlated with dietary FA compositions (r ²=0.88–1.00, P<0.0001). LO included at 50% of added dietary lipids reduced flesh DHA and EPA (20∶5n−3) concentrations to 65 and 58%, respectively, of the concentrations in fish fed FO. Feeding 100% LO reduced flesh DHA and EPA concentrations to 38 and 30%, respectively, of the values in fish fed FO. Differences between diet and flesh FA concentrations showed that 16∶0, 18∶1n−9, and especially DHA were preferentially retained in flesh, whereas 18∶2n−6, 18∶3n−3, and 22∶1n−11 were selected against and presumably utilized for energy. In fish previously fed 50 and 100% LO, feeding a finishing diet containing FO for 16 wk restored flesh DHA and EPA concentrations, to ≈80% of the values in fish fed FO throughout. Flesh DHA and EPA concentrations in fish fed up to 50% LO were above recommended intake values for humans for these EFA. This study suggests that LO can be used as a substitute for FO in seawater salmon feeds and that any reductions in DHA and EPA can be largely overcome with a finishing diethigh in FO before harvest.