Jet entrainment rate in air curtain of open refrigerated display cases

Experimental and computational methods are used to address those parameters that have significant effects on the amount of entrained (warm) air in an open refrigerated display case. These parameters are identified, quantified, and the rate of entrainment is expressed as a function of these parameters. It is found that the turbulence intensity, the shape of the mean velocity profile at the discharge air grill, and the Reynolds number are mainly responsible for the amount of entrained air in a display case. It is also concluded that lower Reynolds numbers will reduce the amount of the entrained air in the display case, however, the trade off will be higher temperature of the food products on shelves. Digital particle image velocimetry (DPIV) was used to map the entire mean velocity flowfield and the turbulence intensity. The laser doppler velocimetry technique was also used to verify the mean velocity and turbulence intensity measurements made by DPIV. The results indicated an excellent agreement between both methods. Parametric studies for the rate of entrainment of the outside air into the display case were performed using a computational fluid dynamics tool. The results indicate that lowering the Reynolds number of the air curtain reduces the entrainment rate. However, sufficiently high momentum should still exist to enforce the integrity of the air curtain structure.     

Performance Evaluation and Policy Selection in Multiclass Networks

This paper concerns modeling and policy synthesis for regulation of multiclass queueing networks. A 2-parameter network model is introduced to allow independent modeling of variability and mean processing-rates, while maintaining simplicity of the model. Policy synthesis is based on consideration of more tractable workload models, and then translating a policy from this abstraction to the discrete network of interest. Translation is made possible through the use of safety-stocks that maintain feasibility of workload trajectories. This is a well-known approach in the queueing theory literature, and may be viewed as a generic approach to avoid deadlock in a discrete-event dynamical system. Simulation is used to evaluate a given policy, and to tune safety-stock levels. These simulations are accelerated through a variance reduction technique that incorporates stochastic approximation to tune the variance reduction. The search for appropriate safety-stock levels is coordinated through a cutting plane algorithm. Both the policy synthesis and the simulation acceleration rely heavily on the development of approximations to the value function through fluid model considerations.     

An examination of four user-based software evaluation methods

Usability has become an important factor in the design of interactive software. In the quest to develop usable software, user participation in the design and evaluation process has been advocated. Four methods; logged data, questionnaires, interviews, and verbal protocol analyses have been the prominent base evaluation methods used, sometimes being combined in an attempt to provide a comprehensive evaluation. However, little is known about the strengths and weaknesses of these methods. In this study, these four methods were used to evaluate three different software types (spreadsheet, word processor, and database) with 148 subjects participating. The data obtained enabled a number of conclusions to be drawn regarding the usefulness of the methods when used individually and in combination.     

Model catalyst studies with single crystals and epitaxial thin oxide films

The paper describes recent results from our relatively new program to perform detailed studies of the catalytic properties of metal-oxide materials; in particular, to effect a determination of the active catalytic site(s) and the mechanism for reactions over this especially important class of heterogeneous catalysts. Issues of structure-sensitivity, poisoning and promotion, and competing reaction mechanisms are critical questions that need to be addressed in a detailed manner for catalysis by oxides. As just one important example, both surface (Langmui–Hinshelwood) and direct (Eley–Rideal) reaction mechanisms have been proposed for the selective catalytic reduction (SCR) reaction of nitrogen oxides (NO_x) over vanadia/titania catalysts. For this program, we are using a number of unique, state-of-the-art capabilities available in the Environmental Molecular Sciences Laboratory (EMSL) at Pacific Northwest National Laboratory; for example, the first molecular beam epitaxy (MBE) system dedicated to the growth of model metal-oxide films, and a unique moderate-pressure catalytic reactor/surface science apparatus. We describe the growth, characterization, and water adsorption properties of a thin Fe₃O₄(0 0 1) film grown on a lattice-matched MgO(0 0 1) substrate. Because our moderate pressure catalysis studies are preliminary at this point, we instead describe our previous results on the CO oxidation reaction over a Ru(0 0 0 1) model catalyst to demonstrate the utility of the experimental approach. We specifically discuss the possibility that this reaction occurs by an Eley–Rideal mechanism.     

Mechanical properties of CRETE,a polyurethane foam

The room-temperature mechanical properties of a closed-cell, polyurethane encapsulant foam were measured as a function of foam density. Over the range of densities examined, the modulus could be described by a power-law relationship with respect to density. This power-law relationship was the same for both tension and compression testing. The basis for this power-law relationship is explained in terms of the elastic compliance of the cellular structure of the foam using a simple geometric model put forth by Gibson and Ashby. The elastic collapse stress, a property relevant to compression testing, also is found to exhibit a power-law relationship with respect to density. The density dependence of this property is also found in the work of Gibson and Ashby and is explained in terms of the Euler buckling of the struts that comprise the cellular structure. Energy absorption during deformation is also reported for both tension and compression testing. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1045–1055, 1998     

Diffusion and sorption of nitroplasticizers in vinyl copolymer elastomer and its composites

To study the aging behavior of cured vinyl copolymer elastomer (VCE) under thermal and nitroplasticizer (NP) environment, we investigated the sorption and diffusion of NP in VCE and its composites. The sorption kinetics of NP into VCE and its composites with respect to filler concentration (0–80%) and temperature (18–70°C) were investigated by conventional gravimetric method. The NP sorption process is endothermic. Kinetic studies show that Fickian diffusion can describe the NP sorption in the VCE polymer. The samples with a high filler concentration show more complicated behavior at low temperature than that at high temperature. The present article discusses the dependences of diffusion coefficient and other related parameters on the polymer concentration and morphological structures of the samples. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40729.     

山东地区村镇住宅太阳能采暖技术经济性分析

综合分析了山东地区的气候状况,阐述了山东地区农村住宅的采暖现状.通过结合临沂市沂自庄新农村建设的工程实例进行分析,详述了太阳能采暖系统的设计方式、特点和运行状况,并对其进行经济性分析,为寒冷地区农村太阳能采暖技术的推广提供了依据.     

Lipid composition of the pineal organ from rainbow trout (Oncorhynchus mykiss)

The lipid composition of the pineal organ from the rainbow trout (Oncorhynchus mykiss) was determined to establish whether the involvement of this organ in the control of circadian rhythms is reflected by specific adaptations of lipid composition. Lipid comprised 4.9% of the tissue wet weight and triacylglycerols were the major lipid class present (47% of total lipid). Phosphatidylcholine (PC) was the principal polar lipid, and smaller proportions of other phospholipids and cholesterol were also present. Plasmalogens contributed 11% of the ethanolamine glycerophospholipids (EGP). No cerebrosides were detected. The fatty acid composition of triacylglycerols was generally similar to that of total lipids in which saturated, monounsaturated and polyunsaturated fatty acids (PUFA) were present in almost equal proportions. Each of the polar lipid classes had a specific fatty acid composition. With the exception of phosphatidylinositol (PI), in which 20∶4n−6 comprised 27.4% of the total fatty acids, 22∶6n−3 was the principal PUFA in all lipid classes. The proportion of 20∶5n−3 never exceeded 6.0% of the fatty acids in any lipid class. The predominant molecular species of PC were 16∶0/22∶6n−3 and 16∶0/18∶1, which accounted for 33.2 and 28.5%, respectively, of the total molecular species of this phospholipid. Phosphatidylethanolamine (PE) contained the highest level of di-22∶6n−3 (13.0%) of any phospholipid. There was also 4.9% of this molecular species in phosphatidylserine (PS) and 4.1% in PC. In PE, the species 16∶0/22∶6, 18∶1/22∶6 and 18∶0/22∶6 totalled 45.1%, while in PS 18∶0/22∶6 accounted for 43.9% of the total molecular species. The most abundant molecular species of PI was 18∶0/20∶4n−6 (37.8%). The lipid composition of the pineal organ of trout, and particularly the molecular species composition of PI, is more similar to the composition of the retina than that of the brain. Molecular species are abbreviated as follows: e.g., 16∶0/22∶6 PC is 1-palmitoyl-2-docosahexaenoyl-sn-glycero-3-phosphocholine.