A New View of Microcrystalline Silicon: The Role of Plasma Processing in Achieving a Dense and Stable Absorber Material for Photovoltaic Applications

To further lower production costs and increase conversion efficiency of thin‐film silicon solar modules, challenges are the deposition of high‐quality microcrystalline silicon (μc‐Si:H) at an increased rate and on textured substrates that guarantee efficient light trapping. A qualitative model that explains how plasma processes act on the properties of μc‐Si:H and on the related solar cell performance is presented, evidencing the growth of two different material phases. The first phase, which gives signature for bulk defect density, can be obtained at high quality over a wide range of plasma process parameters and dominates cell performance on flat substrates. The second phase, which consists of nanoporous 2D regions, typically appears when the material is grown on substrates with inappropriate roughness, and alters or even dominates the electrical performance of the device. The formation of this second material phase is shown to be highly sensitive to deposition conditions and substrate geometry, especially at high deposition rates. This porous material phase is more prone to the incorporation of contaminants present in the plasma during film deposition and is reported to lead to solar cells with instabilities with respect to humidity exposure and post‐deposition oxidation. It is demonstrated how defective zones influence can be mitigated by the choice of suitable plasma processes and silicon sub‐oxide doped layers, for reaching high efficiency stable thin film silicon solar cells.     

[4]Helicene–Squalene Fluorescent Nanoassemblies for Specific Targeting of Mitochondria in Live‐Cell Imaging

Ester, amide, and directly linked composites of squalene and cationic diaza [4]helicenes 1 are readily prepared. These lipid‐dye constructs 2 , 3 , and 4 give in aqueous media monodispersed spherical nanoassemblies around 100–130 nm in diameter with excellent stability for several months. Racemic and enantiopure nanoassemblies of compound 2 are fully characterized, including by transmission electron microscope and cryogenic transmission electron microscope imaging that did not reveal higher order supramolecular structures. Investigations of their (chir)optical properties show red absorption maxima ≈600 nm and red fluorescence spanning up to the near‐infrared region, with average Stokes shifts of 1350–1550 cm^?1. Live‐cell imaging by confocal microscopy reveals rapid internalization on the minute time scale and organelle‐specific accumulation. Colocalization with MitoTracker in several cancer cell lines demonstrates a specific staining of mitochondria by the [4]helicene–squalene nanoassemblies. To our knowledge, it is the first report of a subcellular targeting by squalene‐based nanoassemblies.     

Capacity of Differential Versus Nondifferential Unitary Space–Time Modulation for MIMO Channels

Differential unitary space-time modulation (DUSTM) and its earlier nondifferential counterpart, USTM, permit high-throughput multiple-input multiple-output (MIMO) communication entirely without the possession of channel state information by either the transmitter or the receiver. For an isotropically random unitary input we obtain the exact closed-form expression for the probability density of the DUSTM received signal, permitting the straightforward Monte Carlo evaluation of its mutual information. We compare the performance of DUSTM and USTM through both numerical computations of mutual information and through the analysis of low- and high-signal-to-noise ratio (SNR) asymptotic expressions. In our comparisons the symbol durations of the equivalent unitary space-time signals are equal to T. For DUSTM the number of transmit antennas is constrained by the scheme to be M=T/2, while USTM has no such constraint. If DUSTM and USTM utilize the same number of transmit antennas at high SNRs the normalized mutual information of the two schemes expressed in bits/s/Hz are asymptotically equal, with the differential scheme performing somewhat better. At low SNRs the normalized mutual information of DUSTM is asymptotically twice the normalized mutual information of USTM. If, instead, USTM utilizes the optimum number of transmit antennas then USTM can outperform DUSTM at sufficiently low SNRs     

Photoelectric properties of MISM phthalocyanine structure

Langmuir-Blodgett films have been prepared from copper tetra-4-t-butylphthalocyanine. A voltage dependence of capacitance can be attributed to the presence of a Schottky depletion layer. The barrier potential was determined as l·4eV, and the carrier concentration about 10²⁴m^?3     

External-cavity semiconductor laser with 15 nm continuous tuning range

A 1.26 ?m optical amplifier with a facet modal reflectivity below 0.0001 has been used in a 58 mm-long grating external cavity. The lasing wavelength has been continuously tuned without mode hopping over a range of 15 nm by combined translation-rotation of the diffraction grating. A linewidth of 20 kHz has been derived from heterodyne beat frequency measurements between two tunable external-cavity lasers.     

Stress and failure analysis of laminated composites based on layerwise B-spline finite strip method

A layerwise B_k,k−1-spline finite strip method is developed for stress and failure analysis in fibre reinforced composite laminates. The composite laminates are divided into a number of numerical layers in the thickness direction. A linear variation of in-plane displacements are assumed across the thickness of each numerical layer to represent the sectional warping which can have significant effects on through thickness shear stresses. The development of B_k,k−1-spline finite strip method is presented. Material failure criteria and material degradation models for progressive failure are discussed and integrated in a progressive failure analysis for composite laminates. Numerical applications include a progressive failure analysis example are presented to verify the layerwise B-spline finite strip method developed for stress and failure analysis in composite laminates. Whenever possible the present predictions are compared with the existing analytical and numerical results.     

Gold nanoparticles developed in sol–gel derived apatite—bioactive glass composites

The study is focussed on synthesis and characterisation of a new sol–gel derived composite system consisting of nanocrystalline apatite, bioactive glass and gold nanoparticles, which are of interest both for regenerative medicine and for specific medical applications of the releasable gold nanoparticles. Samples dried at 110°C and then heat treated for 30 min at 300 and 500°C were investigated by thermal analysis (DTA/TG), X-ray diffraction (XRD), UV–VIS–NIR, Fourier Transform Infrared (FTIR) spectroscopy, X-ray Photoelectron(XPS) spectroscopy, Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). Gold nanoparticles and nanocrystalline apatite are developed already after heat treatment at 300°C. XPS analysis clearly revealed the presence of both metallic and ionic gold species. The development of gold nanoparticles was evidenced by UV–VIS–NIR and TEM analysis, and their size increased from few nanometers to 25 nm by increasing the treatment temperature from 300 to 500°C. The bioactivity of the samples immersed in simulated body fluid was demonstrated by XRD and SEM results.     

Spin-Wave Optics in YIG Realized by Ion-Beam Irradiation

Direct focused-ion-beam writing is presented as an enabling technology for realizing functional spin-wave devices of high complexity, and demonstrate its potential by optically-inspired designs. It is shown that ion-beam irradiation changes the characteristics of yttrium iron garnet films on a submicron scale in a highly controlled way, allowing one to engineer the magnonic index of refraction adapted to desired applications. This technique does not physically remove material, and allows rapid fabrication of high-quality architectures of modified magnetization in magnonic media with minimal edge damage (compared to more common removal techniques such as etching or milling). By experimentally showing magnonic versions of a number of optical devices (lenses, gratings, Fourier-domain processors) this technology is envisioned as the gateway to building magnonic computing devices that rival their optical counterparts in their complexity and computational power.     

Factors associated with carcass contamination by Campylobacter at slaughterhouse in cecal-carrier broilers

A study was conducted in 2009 to identify risk factors of Campylobacter spp. transmission from the digestive tract to the carcasses of standard broilers (slaughter age: 37 day, carcass weight: 1.3 kg on average). Counts of Campylobacter were performed on pools of 10 ceca and 10 neck-skins from 108 Campylobacter ceca-positive batches in three slaughterhouses. Technical and health data also was collected on the broilers: age, size, carcass weight (mean and standard deviation), condemnation rate, mortality rate and nature of treatment during the rearing period.Cecal counts varied from 4.8 to 10.2 log₁₀ cfu/g. In seventeen batches (15.7%), the skin count was below the detection limit. In the 91 batches with positive neck-skin test results, the counts varied from 2.0 to 5.2 log₁₀ cfu/g. Standard deviation of carcass weight, condemnation rate, slaughter rate and cecal count were significantly lower and growth rate higher in the 17 batches where neck-skin results were not detected positive. Multivariate analysis showed that batches with higher standard deviation of carcass weight were 5 to 9 fold more at risk of having detectable carcass contamination. Among the 91 positive neck-skin batches, only slaughter rate and cecal counts were found to have a significant but limited effect on the level of neck-skin contamination. As far as body weight homogeneity may be affected by disease, better health control can contribute to a reduction of the contamination of the broiler carcasses in Campylobacter carrier batches.