Reaction products of ammonium nitrate phosphate fertilizers of varying water-soluble phosphorus content in different Indian soils

Studies were undertaken on the isolation and identification of reaction products of ammonium nitrate phosphate (ANP) fertilizers containing 30, 50 and 70 per cent water-soluble phosphorus (WSP) of total phosphorus in representative soils of the vertisol, oxisol, alfisol, entisol, mollisol and aridisol groups of India. ANP fertilizers were applied in solid form to soil, and reaction products formed at and around the site of ANP fertilizer placement were identified after six weeks incubation in moist soils by X-ray diffraction technique. DCPD (dicalcium phosphate dihydrate- CaHPO₄ · 2H₂O) was the major reaction product of ANP fertilizers containing 30 and 50 per cent WSP in vertisol, entisol, aridisol, mollisol, oxisol and alfisol, and of ANP containing 70 per cent WSP in vertisol, entisol, alfisol, aridisol and mollisol. DCP (dicalcium phosphate-CaHPO₄) was detected with ANP of 30 and 50 per cent WSP in the vertisol, alfisol, entisol, mollisol and aridisol groups of soils. In addition to DCPD, FePO₄ · 2H₂O (metastrengite) and AlPO₄ · 2H₂ O-monoclinic (metavariscite) were formed in alfisol and oxisol soils with ANP of 30 and 50 per cent WSP. FePO₄ · 2H₂O and AlPO₄ · 2H₂O (metavariscite) were identified in alfisol and oxisol soils while AlPO₄ · 2H₂O-orthorhombic (variscite) was formed in alfisol soils with ANP of 70 per cent WSP.     

Transmembrane passage of cytokine-inducing bacterial products across new and reprocessed polysulfone dialyzers

The widespread use of bicarbonate dialysate and reprocessed high-efficiency and "high-flux" dialyzers has raised concerns about the increased risk of reverse-transfer of dialysate contaminants into the blood compartment. To evaluate this concern, the reverse-transfer of bacterial products from contaminated bicarbonate dialysate into the blood compartment was compared during in vitro dialysis with new or reprocessed high-flux polysulfone dialyzers. In vitro dialysis was carried out at 37 degrees C by use of a counter-current recirculating loop dialysis circuit with either new high-flux polysulfone dialyzers or dialyzers reprocessed once or 20 times with formaldehyde (0.75%) and bleach (< 1%) with an automated system. Heparinized whole blood from healthy volunteers was circulated through the blood compartment, and bicarbonate dialysate was circulated in the dialysate compartment. The dialysate was challenged sequentially by 1:1000 and 1:100 dilutions of a sterile Pseudomonas aeruginosa culture supernatant (bacterial challenge). Samples were drawn from the blood and dialysate compartments 1 h after each challenge. Peripheral blood mononuclear cells (PBMC) were harvested by Ficoll-Hypaque separation from whole blood in the blood compartment and a 5 x 10(6) PBMC/mL cell suspension was prepared. Likewise, dialysate samples (0.5 mL) were added to 0.5 mL suspension of 5 x 10(6) PBMC/mL drawn at baseline. All PBMC suspensions were incubated upright in a humidified atmosphere at 37 degrees C with 5% CO2 for 24 h, and total interleukin-1 alpha (IL-1 alpha) and tumor necrosis factor-alpha (TNF alpha) cytokine production (cell-associated and secreted) was measured by radioimmunoassay. Eight experiments were performed for each arm of the study with the same donor for each arm. One hour after contaminating the dialysate with a 1:1000 dilution of the bacterial challenge, IL-1 alpha production by PBMC harvested from the blood compartment was 160 +/- 0, 171 +/- 11, and 270 +/- 35 pg, respectively, for new dialyzers, dialyzers reprocessed once, and dialyzers reprocessed 20 times (P = 0.004). One hour after challenging the dialysate with 1:100 dilution, IL-1 alpha production by PBMC harvested from the blood compartment was 188 +/- 20, 228 +/- 35, and 427 +/- 67 pg, respectively, for new dialyzers, dialyzers reprocessed once, and dialyzers reprocessed 20 times (P = 0.006). IL-1 alpha production by PBMC from dialyzers reprocessed 20 times was significantly greater than both new and dialyzers reprocessed once. However, there were no significant differences between new dialyzers and dialyzers reprocessed once. Similarly, after the 1:1000 challenge, TNF alpha production by PBMC harvested from the blood compartment was 160 +/- 0, 160 +/- 0, and 213 +/- 22 pg, respectively, for new dialyzers, dialyzers reprocessed once, and dialyzers reprocessed 20 times (P = 0.008). After the 1:100 challenge, TNF alpha production was 168 +/- 8, 188 +/- 20, and 225 +/- 32 pg, respectively, for new dialyzers, dialyzers reprocessed once, and dialyzers reprocessed 20 times (P = 0.20). These results demonstrate that reprocessing of high-flux polysulfone dialyzers with bleach increases the risk of reverse-transfer of bacterial products from contaminated dialysate, and this risk appears to increase with the number of reuses. Consequently, units that reprocess membranes with bleach and have suboptimal water quality might subject their patients to a higher risk of cytokine-related morbidity.     

The mismatch negativity to frequency deviant stimuli during natural sleep

Eight subjects spent a single night in the sleep laboratory. Event-related potentials (ERPs) were recorded during the presentation of two auditory "oddball' stimulus conditions in which tonal frequency was manipulated. In the first condition, 1000 Hz "standard' and 2000 Hz "deviant' tones were presented. In the second condition, the deviant tone was reduced to 1050 Hz. In both conditions, deviant probability was 0.2. Stimuli were presented every 600 ms during wakefulness and stages 2, 4, and REM of sleep. A distinctive N1 wave was visible in both stimulus conditions when the subject was awake. The deviant stimuli elicited a "mismatch negativity' (MMN) that inverted in polarity at the mastoid. In REM sleep, an N1 and a MMN were also elicited in both conditions. In the large deviance condition, the MMN had a slightly attenuated amplitude and was shorter in duration while in the small deviant condition, its peak latency was unusually early. Neither the N1 nor the MMN could be recorded in non-REM sleep.     

Fuzzy c-means clustering of incomplete data

The problem of clustering a real s-dimensional data set X={x(1 ),,,,,x(n)} subset R(s) is considered. Usually, each observation (or datum) consists of numerical values for all s features (such as height, length, etc.), but sometimes data sets can contain vectors that are missing one or more of the feature values. For example, a particular datum x(k) might be incomplete, having the form x(k)=(254.3, ?, 333.2, 47.45, ?)(T), where the second and fifth feature values are missing. The fuzzy c-means (FCM) algorithm is a useful tool for clustering real s-dimensional data, but it is not directly applicable to the case of incomplete data. Four strategies for doing FCM clustering of incomplete data sets are given, three of which involve modified versions of the FCM algorithm. Numerical convergence properties of the new algorithms are discussed, and all approaches are tested using real and artificially generated incomplete data sets.     

Autothermal hybridization and controlled production of hydrogen-rich syngas in a molten salt solar gasifier

High efficiency solar steam gasification of biomass is carried out in a prototype molten salt reactor for solar-only and solar-autothermal hybrid operation. Previous demonstration of the prototype 3-kW solar gasifier for steam gasification of cellulose at stoichiometric conditions demonstrated thermal efficiency of 44% during continuous operation at 1200 K. The present work expands the range of operating conditions to consider two challenges. Hybridization between solar and autothermal modes of operation is accomplished by adding oxygen directly to the reactor. Control of the H₂:CO ratio of the product gas is accomplished through in-situ steam shifting. Hybridization stabilized temperatures for variations in radiative input as large as a 30% reduction in power, corresponding to conditions where both sensible and chemical heat demands for the process were fully met by exothermic heat release with no significant challenges. Peak efficiencies and carbon conversion values observed are 45% and 99.5% respectively. The resulting product gas stream composition was shifted from a hydrogen and carbon monoxide ratio of 1:1 with stoichiometric steam delivery to a ratio of 1.7:1 with steam at nine times the stoichiometric amount, only slightly lower than equilibrium predictions. The results demonstrate very favorable attributes for the molten salt reactor in a continuous fuel production process.     

Impact of Storm-Water Runoff on Clogging and Fecal Bacteria Reduction in Sand Columns

Storm-water runoff has been identified as a major cause of coastal water quality degradation. Storm-water outfalls, common in many coastal towns, convey bacteria and other pollutants into the ocean and estuaries. In an effort to minimize this impact, the Town of Kure Beach, North Carolina, installed Dune Infiltration Systems (DIS) at two storm-water outfalls to receive storm-water runoff and allow infiltration beneath the beach dunes. A laboratory column experiment was performed to supplement this installation and determine the potential hydraulic and bacterial removal efficiency of the sand comprising the Kure Beach dunes. Columns constructed using sand collected at different depths of the dune were used to analyze the affect of bacteria application on infiltration and to examine the changes in bacteria removal that occur as infiltration rates are affected by bacteria-laden water application. Sand columns were loaded over a 60-day period with either bacteria-free storm water or storm water spiked with Escherichia coli. The seepage rate for the bacteria-spiked storm-water treatment was significantly lower (p<0.05) than the seepage rate of the bacteria-free treatment, particularly toward the end of the study. Bacteria application likely compounds the impact of sediment clogging at the sand/storm-water interface. This study indicates the need for maintenance when implementing a DIS or similar sand filter to maintain design infiltration rates, especially if reduced infiltration rates are not planned for in the design. However, a decrease in seepage rate was correlated with a decrease in effluent bacteria concentration in the bacteria-spiked storm-water sand columns. Thus, optimization is required to provide maximum infiltration of storm-water while maintaining bacteria removal efficiency.     

Enhancement of the surface expression of tumor necrosis factor alpha (TNFalpha) but not the p55 TNFalpha receptor in the THP-1 monocytic cell line by matrix metalloprotease inhibitors

The monocytic cell line THP-1 can be induced to express and release tumor necrosis factor alpha (TNFalpha) and both TNFalpha receptors (p55 and p75) upon exposure to bacterial lipopolysaccharide (LPS). The broad-spectrum matrix metalloprotease (MMP) inhibitors [4-(N-hydroxyamino)-2R-isobutyl-3S-(phenylthiomethyl)succinyl]-L-p henylalanine-N-methylamide (GI-129471) and marimastat [2S-[N4(R*),2R*,3S*]]-N4[2,2-dimethyl-1-[(methylamino)carbonyl]propyl]-N 1,2-dihydroxy-3-(2-methylpropyl)butanediamide (BB-2516) were effective inhibitors of LPS-induced TNFalpha (soluble) release with IC50 values of 0.2 and 4.0 microM, respectively. Upon LPS stimulation, the expression of pro-TNFalpha (membrane associated) on the cell surface (FACS analysis) could not be observed. However, in the presence of GI-129471, a concentration-dependent increase in TNFalpha surface expression was observed. Peak expression (percentage of cells expressing pro-TNFalpha and mean fluorescence units) in the presence of GI-129471 was at 2 hr, and steadily declined to return to near control levels by 8 hr. This time course was similar to TNFalpha release, which also peaked at 2-4 hr after LPS exposure and then declined. Stimulation of THP-1 cells with LPS + phorbol myristate acetate increased the percentage of cells expressing pro-TNFalpha by 10-fold. In the presence of GI-129471, these increases were augmented further and peaked between 2 and 4 hr, but also returned to near control levels of expression by 24 hr. This was in contrast to the release of soluble TNFalpha, which continued to accumulate over a 24-hr time course. TNFalpha receptor I (p55, TNFRI) and II (p75, TNFRII) shedding was also inhibited by GI-129471 (IC50 = 1.5 and 3.1 microM, respectively) and BB-2516 (IC50 = 14 and 15 microM, respectively). Unlike pro-TNFalpha surface expression, surface expression of both TNFalpha receptors steadily increased over 72 hr. In contrast to pro-TNFalpha surface expression, TNFRI surface expression was not augmented by these MMP inhibitors in THP-1 cells after LPS stimulation. Surface expression of TNFRII was augmented by these MMP inhibitors. These results suggest that even in the continued presence of LPS stimulation and an inhibitor of TNFalpha processing, the augmented surface expression of TNFalpha is transient. The potential "deleterious" implications of high levels of surface pro-TNFalpha expression in the presence of these inhibitors may be lessened by its transient nature.     

A comprehensive CAD system for high-performance 300 K-circuit ASIClogic chips

A computer-aided design (CAD) system has been developed to support design of CMOS application-specific integrated circuit (ASIC) logic chips containing more than 300 K equivalent two-input NANDs with 180-ps typical gate delays. The underlying technology is a 0.8-μm, four-level-metal, single-poly CMOS process, with a 0.45-μm nominal effective channel length and 180-ps typical gate delay. Both standard-cell and gate-array circuit libraries are provided, including fixed and growable memory macros. Key new system features are described in the areas of high-level design and synthesis, delay calculation and timing analysis, timing guidance to physical design, physical design, clock construction, and test generation. Early processing results are reported for several test chips, including a 9.7-mm 2-million-transistor chip and a 14.5-mm 300 K-equivalent-gate chip     

Disposition of 14C-eptifibatide after intravenous administration to healthy men

Eptifibatide, a synthetic peptide inhibitor of the platelet glycoprotein IIb/IIIa receptor, has been studied as an antithrombotic agent in a variety of acute ischemic coronary syndromes. The purpose of the present study was to characterize the disposition of 14C-eptifibatide in man after a single intravenous (i.v.) bolus dose. 14C-Eptifibatide (approximately 50 microCi) was administered to eight healthy men as a single 135-microgram/kg i.v. bolus. Blood, breath carbon dioxide, urine, and fecal samples were collected for up to 72 hours postdose and analyzed for radioactivity by liquid scintillation spectrometry. Plasma and urine samples were also assayed by liquid chromatography with mass spectrometry for eptifibatide and deamidated eptifibatide (DE). Mean (+/- SD) peak plasma eptifibatide concentrations of 879 +/- 251 ng/mL were achieved at the first sampling time (5 minutes), and concentrations then generally declined biexponentially, with a mean distribution half-life of 5 +/- 2.5 minutes and a mean terminal elimination half-life of 1.13 +/- 0.17 hours. Plasma eptifibatide concentrations and radioactivity declined in parallel, with most of the radioactivity (82.4%) attributed to eptifibatide. A total of approximately 73% of administered radioactivity was recovered in the 72-hour period following 14C-eptifibatide dosing. The primary route of elimination was urinary (98% of the total recovered radioactivity), whereas fecal (1.5%) and breath (0.8%) excretion was small. Eptifibatide is cleared by both renal and nonrenal mechanisms, with renal clearance accounting for approximately 40% of total body clearance. Within the first 24 hours, the drug is primarily excreted in the urine as unmodified eptifibatide (34%), DE (19%), and more polar metabolites (13%).     

Numerical convergence and interpretation of the fuzzy c-shellsclustering algorithm

R. N. Dave's (1990) version of fuzzy c-shells is an iterative clustering algorithm which requires the application of Newton's method or a similar general optimization technique at each half step in any sequence of iterates for minimizing the associated objective function. An important computational question concerns the accuracy of the solution required at each half step within the overall iteration. The general convergence theory for grouped coordination minimization is applied to this question to show that numerically exact solution of the half-step subproblems in Dave's algorithm is not necessary. One iteration of Newton's method in each coordinate minimization half step yields a sequence obtained using the fuzzy c-shells algorithm with numerically exact coordinate minimization at each half step. It is shown that fuzzy c-shells generates hyperspherical prototypes to the clusters it finds for certain special cases of the measure of dissimilarity used.