Influence of genetics,environment and admixtures on low erucic acid rapeseed in Canada

Single plant isolates in theBrassica napus andBrassica campestris species of rapeseed yielded glyceride oil containing small amounts of erucic acid. Agronomically suitable varieties were grown commercially in 1971 as the first phase in a changeover of Canadian rapeseed production from varieties with erucic contents of 20–45% to low erucic acid varieties. A program to monitor the erucic content by gas chromatographic analysis in the stages of production, handling and transportation from seed to export shipment was undertaken to evaluate the effects of genetics, environment and admixture. The individual increase in erucic content ranged from 0.5 to 1.0, resulting in total increases of 1–2%. NRCC No. 13471. One of six papers presented in the symposium “Rapeseed Marketing and Breeding,” AOCS Meeting, Ottawa, September 1972.     

Development of optical anisotropy in vitrains during carbonization

The purpose of this work was to examine the possible significance in the formation of metallurgical coke of the anisotropic spherical mesophase exemplified by that found during the carbonization of pitch-like materials, and to ascertain if the various types of optical anisotropy found in coke could form a basis for the characterization of cokes produced from different coals. Vitrains from a wide range of coals were carbonized at temperatures from 370 to 1000 °C and the types and amounts of optical anisotropy in the resulting semi-cokes and cokes were determined from microscopic examination, the anisotropic components being classified according to grain size of the granular mosaics and appearance. The anisotropy developed directly from the isotropic phase, appearing initially as a fine-grained mosaic. With increasing carbonization temperature, this fine-grained mosaic was transformed into progressively coarser-grained anisotropy, the extent of this transformation depending on the rank of the vitrain. It is therefore concluded that the formation, growth and coalescence of anisotropic spherical bodies, such as occurs during the carbonization of pitch, is not a necessary precursor of the mosaic anisotropy in coke. The type and amount of anisotropy developed provide a quantitative means of characterising different cokes.     

火电机组厂级负荷优化算法的比较

分析了目前国内火电机组厂级机组间负荷优化分配算法的研究现状.针对国内常见的火电机组类型和组合方式,在对常用算法进行分析和比较后,对各种算法的优劣和适用范围进行总结,并对今后火电机组厂级负荷优化的研究和应用提出展望.     

关于培养大学生团队精神的一些思考

文章解析了团队及团队精神的内涵,分析了大学生团队精神缺失的各种表现,提出了培养大学生团队的精神的几种方法。     

控制爆破拆除危桥的实践

介绍了运用控制爆破技术,对悬臂钢筋混凝土斜拉桥爆破拆除方法,指出了布孔、装药、防护等方面的技术问题.     

一种自适应入位固持装置及试验研究

为解决飞机数字化装配中难以对机身大部件增加辅助固持并保持大部件位姿不变的技术难题,提出一种基于气浮和万向球座的大部件位姿跟随固持方法,并设计制造称之为随动定位器的专用柔性工装.结合某工程,进行定位器关键参数的分析计算和相关工艺试验研究,并对油压波动、相关零件磨损对锁紧力的影响以及芯轴自由端关键参数选择与入位可靠性问题进行了研究.结果表明,在芯轴角度偏差较小时,随动定位器可以在确保大部件位姿不被破坏的情况下,实现芯轴的小阻力自适应入位,并可以根据选定的工作油压和配合间隙可靠固持大部件,其性能可以满足工程要求.     

基于多级递阶结构的核电工程管理系统模式与优化

应用系统工程解释结构模型ISM法,结合项目管理方法论,对核电工程项目管理系统进行结构分析,建立其递阶结构模型,并通过模型对管理要素进行优化整合,说明了核电工程AE公司的EP结合,以及进一步实现EPC结合,将能简化核电工程管理系统结构,使管理系统清晰、高效。由此得出在我国核电即将开始的批量化建设时期,培育发展专业化的核电AE工程公司的必要性。研究结果对我国核电工程建造方式选择与管理系统优化具有重要的理论和应用价值。     

Aging characteristics of high-power lithium-ion cells with LiNi0.8Co0.15Al0.05O2 and Li4/3Ti5/3O4 electrodes

The impedance rise that results from the accelerated aging of high-power lithium-ion cells containing LiNi_0.8Co_0.15Al_0.05O₂-based positive and graphite-based negative electrodes is dominated by contributions from the positive electrode. Data from various diagnostic experiments have indicated that a general degradation of the ionic pathway, apparently caused by surface film formation on the oxide particles, produces the positive electrode interface rise. One mechanistic hypothesis postulates that these surface films are components of the negative electrode solid electrolyte interphase (SEI) layer that migrate through the electrolyte and separator and subsequently coat the positive electrode. This hypothesis is examined in this article by subjecting cells with LiNi_0.8Co_0.15Al_0.05O₂-based positive and Li_4/3Ti_5/3O₄-based negative electrodes to accelerated aging. The impedance rise in these cells was observed to be almost entirely from the positive electrode. Because reduction products are not expected on the 1.55 V Li_4/3Ti_5/3O₄ electrode, the positive electrode impedance cannot be attributed to the migration of SEI-type fragments from the negative electrode. It follows then that the impedance rise results from mechanisms that are “intrinsic” to the positive electrode.     

磷改性ZSM-5分子筛物化性质和裂解制乙烯性能的研究

The physicochemical features of phosphorus-modified ZSM-5 zeolites (SiO2/Al2O3 molar ratio is 25) were characterized by XRD(X-ray diffraction), BET(Brunauer, Emmett and Teller spcific surface area measurement), NH3-TPD(ammonia temperature-programmed desorption) and MASNMR(magic angle spinning nuclear magnetic resonance), and the performance on catalytic pyrolysis to produce ethylene was investigated with a light hydrocarbon fixed bed micro-reactor with n-octane as feed. The results show that the acid site density, acid intensity and hydrothermal stability of ZSM-5 zeolite were improved by phosphorus modification. When P205 content in ZSM-5 zeolite is higher than 2.5%, phosphorus modification can prevent ZSM-5 zeolite crystal structure transformation from orthorhombic to monoclinic. In addition, the dealumination of ZSM-5 zeolite framework was moderated by phosphorus modification under high temperature hydrothermal treatment. The results of n-octane pyrolysis on phosphorus-modified ZSM-5 zeolites show that ethylene yields of zeolites with different phosphorus content are almost the same under the same n-octane conversion. However, the modified zeolites with higher pyrolysis activity give lower yield of propene, butene and total olefin than lower pyrolysis activity under the same n-octane conversion.