Fabrication of Copper Nanowire Films and their Incorporation into Polymer Matrices for Antibacterial and Marine Antifouling Applications

With the ban of tributyltin, copper‐based biocides are now widely used in antifouling coatings as the major active ingredients. Given the past experience of heavy‐metal accumulation in harbors with limited water exchange, there is a significant interest in developing copper materials that greatly reduce the amount of copper ions released into marine surroundings. In this paper, copper nanowires (NWs) encapsulated in polymer matrices are investigated as the means to control the release of copper ions and to achieve a long‐lasting antifouling effect. Very long CuNWs with high aspect ratio in organic solution are drop‐coated onto substrates to fabricate uniform thin films. They are then incorporated into an elastomeric polydimethylsiloxane (PDMS) matrix. A small amount of CuNWs in PDMS can inhibit barnacle cyprid settlement, while it exhibits low mortality to cyprids and nauplii present in the surrounding seawater environment. The low levels of copper released after 50 days suggest that the intersecting and interconnected CuNWs embedded in PDMS could potentially release copper ions continuously over a few years in seawater. This approach provides a novel platform to use hybrid materials as effective marine antifouling coatings, and may be applied to fouling release materials to enhance their antifouling properties.     

Thermal and mechanical properties of hemp fabric-reinforced nanoclay–cement nanocomposites

The influence of nanoclay on thermal and mechanical properties of hemp fabric-reinforced cement composite is presented in this paper. Results indicate that these properties are improved as a result of nanoclay addition. An optimum replacement of ordinary Portland cement with 1 wt% nanoclay is observed through improved thermal stability, reduced porosity and water absorption as well as increased density, flexural strength, fracture toughness and impact strength of hemp fabric-reinforced nanocomposite. The microstructural analyses indicate that the nanoclay behaves not only as a filler to improve the microstructure but also as an activator to promote the pozzolanic reaction and thus improve the adhesion between hemp fabric and nanomatrix.     

Mineralization of osteoblasts with electrospun collagen/hydroxyapatite nanofibers

Regeneration of fractured or diseased bones is the challenge faced by current technologies in tissue engineering. The major solid components of human bone consist of collagen and hydroxyapatite. Collagen (Col) and hydroxyapatite (HA) have potential in mimicking natural extracellular matrix and replacing diseased skeletal bones. More attention has been focused on HA because of its crystallographic structure similar to inorganic compound found in natural bone and extensively investigated due to its excellent biocompatibility, bioactivity and osteoconductivity properties. In the present study, electrospun nanofibrous scaffolds are fabricated with collagen (80 mg/ml) and Col/HA (1:1). The diameter of the collagen nanofibers is around 265 ± 0.64 nm and Col/HA nanofibers are 293 ± 1.45 nm. The crystalline HA (29 ± 7.5 nm) loaded into the collagen nanofibers are embedded within nanofibrous matrix of the scaffolds. Osteoblasts cultured on both scaffolds and show insignificant level of proliferation but mineralization was significantly (p < 0.001) increased to 56% in Col/HA nanofibrous scaffolds compared to collagen. Energy dispersive X-ray analysis (EDX) spectroscopy results proved the presence of higher level of calcium and phosphorous in Col/HA nanocomposites than collagen nanofibrous scaffolds grown osteoblasts. The results of the present study suggested that the designed electrospun nanofibrous scaffold (Col/HA) have potential biomaterial for bone tissue engineering.     

Equilibrium of Heterogeneous Congestion Control: Existence and Uniqueness

When heterogeneous congestion control protocols that react to different pricing signals share the same network, the resulting equilibrium may no longer be interpreted as a solution to the standard utility maximization problem. We prove the existence of equilibrium in general multiprotocol networks under mild assumptions. For almost all networks, the equilibria are locally unique, finite, and odd in number. They cannot all be locally stable unless there is a globally unique equilibrium. Finally, we show that if the price mapping functions, which map link prices to effective prices observed by the sources, are sufficiently similar, then global uniqueness is guaranteed.     

A methodology for neural network training for control of driveswith nonlinearities

The learning process of a multilayered feedforward neural network involves extracting a desired function from the training data presented through an appropriate training algorithm. To achieve the desired function, the generation of good training data is necessary. A closed-loop methodology for neural network training for control of drives with nonlinearities is presented. Problems associated with the more common open-loop training scheme, and how these are addressed by the proposed closed-loop method, are discussed. An inverse nonlinear control using a neural network (INC/NN), a control strategy which incorporates the neural network for control of nonlinear systems, is described and used to demonstrate the effectiveness of the closed-loop training scheme. Simulation studies and experimental results are presented to verify the improvement achieved by the closed-loop training methodology     

Validation of [13C]urea breath test for Helicobacter pylori using a simple gas chromatograph-mass selective detector

OBJECTIVE: Isotope ratio mass spectrometry (IRMS) is the accepted method for accurately measuring the 13CO2:12CO2 ratio in the non-invasive and non-radioactive [13C]urea breath test (13C-UBT) for Helicobactor pylori. The IRMS instrument, an expensive and highly specialized analyser, is rarely available. The objective of this project was to modify and validate the use of a simple bench-top gas chromatograph-mass selective detector (GC-MSD) for 13C-UBT. METHODS: Breath samples from 71 patients were taken at baseline and 30 min after ingestion of 100 mg [13C]urea. The breath samples were analysed using GC-MSD in the selected ion monitoring mode. The reference 13CO2:12CO2 ratio was from NBS19 obtained from the US National Institute of Standards and Technology. 13CO2:12CO2 ratios of the breath samples were determined. Excess delta per thousand (per mil, delta/thousand) of the 30 min sample over the baseline (deltadelta/thousand) of > or = 6deltadelta/thousand was considered H. pylori positive. Results from 13C-UBT and histology determined blind to each other were compared. RESULTS: The coefficient of variation of the reference 13CO2:12CO2 ratio was 0.06%. Using histology as the 'gold standard', the sensitivity (97.9%) and specificity (95.8%) of the GC-MSD 13C-UBT were comparable to those of other methods of H. pylori diagnosis. CONCLUSION: A gas chromatograph coupled to a mass selective detector that is available in many analytical and biomedical laboratories can be used for the 13C-UBT. This method will increase the availability and reduce the cost of this non-invasive, non-radioactive diagnostic test.     

Regulation and regulatory role of gamma-carboxyglutamic acid containing clotting factors

Several investigators have recently reported that significant numbers of appropriately adapted mutants can be induced in bacterial and yeast strains by exposing stationary phase cells to specific environmental challenges. The resulting mutants are said to be both selection-induced and demonstrably non-random in origin; if this interpretation is correct, it is in direct conflict with the conventional neo-Darwinian view, which is that spontaneous mutants are truly random in origin and arise without the intervention of any overtly adaptive forces. We believe that there are alternative ways of accounting for the appearance of many (and probably all) of the additional mutants which proponents of the adaptive mutation theory claim are observed only after they applied the appropriate selective pressure. Having reviewed the available evidence, we consider that most (if not all) of the sorts of mutants which are said to have been induced following exposure of stationary-phase cells to intense selective pressure are equally likely to have been generated during the operation of certain well-known, conventional (and essentially random) cellular DNA repair processes. Evidence in support of our view can be found in the mainstream literature on the origins of spontaneous mutations. We also note that some of the molecular models which have recently been proposed to explain the production of selection-induced mutations preferentially (or even only) in genes of adaptive significance may turn out to be of considerable interest in their own right, even although the mutants whose origins they were intended to explain may turn out to have arisen in a manner which is totally independent of the conditions used for their selection.